Home > Aaxa > Projector > Aaxa Projector P3 User Manual

Aaxa Projector P3 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Aaxa Projector P3 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 39 Aaxa manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							aaxa
    TECHNOLOGIES
    User Guide
    P3 Pico Projector 
    						
    							Caution!
    WARNING:  Please use this product as instructed.  Misuse may cause 
    injury or death.
    *Do not operate the Projector in direct sunlight or near heat sources such as heaters, fires, and stoves as this may cause a firehazard.
    *Do not place inflammable materials beside the projector as this may cause a fire hazard.
    *Do not operate the projector close to sources of steam or oil such as a humidifier as this may cause electric shock.
    *Do not operate the projector near water such as by the sink or bathtub as this may cause electric shock. 
    *Do not block or restrict airflow from ventila-tion holes as this may cause the Projector to overheat.
    Caution for Battery Use• Do not pierce or puncture the battery with sharp objects• Do not heat the product or expose it to high temperature.• Do not wet it or place it in any liquid
    Caution for Earphone (Earplug) Use• Prolonged use at high volume may impair your hearing.• High volume during walking or driving may cause distractions and result in injury or death
    *Do not drop the projector or allow heavy impacts or shock as this 
    *Do not dispose of improperly - This projector has a built-in lithium ion battery and must be send to a certi-fied recycling center 
    						
    							Table of Contents
    Chapter 1: P3 at a glance
    Main Unit Front/Back
    Remote & Keypad
    Accessories 
    Chapter 2: Getting Started
    Powering On / OFF
    Focus Adjustment  / Throw 
    Distance
    External Inputs /Input Sources
    Connecting to a Computer
    Connecting to Composite Video
    Connecting to Speaker or 
    Headphones
    2
    2
    3
    4
    5
    5
    6
    7
    8
    11
    13
    14
    15
    15
    16
    18
    19
    20
    22
    22
    24
    Connecting to a USB drive
    Chapter 3: Menu Screens
    Main menu
    File Menu System
    Video Player Menu
    Photo Viewer Menu
    Music Player Menu
    Chapter 4: Technical Details
    Troubleshooting
    Specifications
    1 
    						
    							P3 at a Glance
    2
    Input Select
    VGA Input
    Power Input
    A/V Input
    Projection Lens
    Headphone
    Directional Pad
    Mini USB Port
    HDMI Port
    Chapter 1
    Main Unit Front/Back/SidePower Button
    Focus Adjustment
    Back Button
    Power On/Off
    Settings Menu 
    Main Menu Navigation
    Volume Down
    Vertical Img Flip 
    						
    							Remote & Keypad
    3
    Power On/Off
    Settings Menu 
    Main Menu Navigation
    Volume Down
    Vertical Img Flip
    Select Source
    Mute
    Volume UP
    Horizontal Img Flip
    Media Player Menu 
    NavigationPower
    Exit/Back
    Direction Pad
    Both the keypad and remote can be used to navigate through the menus.  The Main Menu Navigation on the remote functions exactly the same as the directional p\
    ad on the P3 unit.
    Source 
    						
    							Accessories
    4
    *Under various circumstances, the actual accessories may be different from 
    those shown in the pictures above.
    TripodRemote
    Power AdapterVGA Cable
    A/V Cable
    Mini USB to 
    USB Adapter 
    						
    							Getting Started
    1. Connect the power cord to the P3.
    2. Connect the wall plug into the wall power source.
    3. Press POWER button and hold for 2-3 seconds to switch on or switch off 
    the power.
    4. The projector will boot with a boot screen and finish booting to the media 
    player’s Main Menu.
    5. If the projector does not boot to the “Main Menu” Press “SRC”, select “Me-
    dia” to start the Media Player
    • 4 hours of charge time is required to reach a full charge.
    • When charging, the inside of the P3 will glow red.
    • When fully charged, the inside of the P3 will turn blue.
    5
    Powering ON the projector
    Chapter 2
    Powering OFF the projector
    1. Press and hold the power button for 3 seconds.
    2. The optical engine should power off and the fan should stop spinning.
    Note: The P3 Projector battery does not charge when it is in operation. 
    						
    							Focus Adjusment / Throw Distance
    Focus Adjustment
    1. Spin the focus wheel left of right until the image becomes 
    clear.
    2. The recommended focus distance for this projector is 12” to 
    infinity.
    6
    DIAGONAL SCREEN SIZE
    16:9 Aspect  Ratio
    Throw Distance Chart
    Distance inch (“)1218243036748496
    Diagonal Inch (“)6.49.612.8161939.64551.3
    Throw Ratio 1.87
    *minimum throw distance: 10 inches 
    						
    							External Inputs/Outputs
    7Laptop VGA or HDMIDesktop VGA or HDMIUSB Stick
    Headphone/speaker
    Composite Cable
    The P3 can connect to a wide variety of multi-media devices.  You can use the HDMI, VGA, Or Composite A/V cables to connect to external devices such as iPod®, iPad® iPhone®, mobile phones, notebook/PC, game console or more.*accessory cables may be required 
    						
    							Connecting to a Computer via VGA
    Connect the large end of the 
    8
    VGA Cord
    to your computer’s
    VGA Adapter
    Connect the small end of the
    VGA Cord
    to your P3’s 
    VGA Adapter
    Step 1:
    Step 2:
    Step 3:
    There are two ways to connect a computer to your P3.  You can connect with the VGA adapter or the HDMI adapter. Whichever connection you computer has will work.
    Connecting via VGA Connection
    Press the SRC button and select PC-RGB 
    						
    All Aaxa manuals Comments (0)

    Related Manuals for Aaxa Projector P3 User Manual