Acco Nobo Projector S11E DLP User Manual

21 USER CONTROLS
Reset:
Reset select includes
both Image-I and
Image-II settings
Video Mode
IMAGE-II
(VIDEO MODE)
Keystone Correction
Adjust image distortion caused by tilting the projector (±16 degrees).
Aspect Ratio
You can use this function to fit your desired aspect ratio type.
Zoom
You can use this function to adjust the screen to the most appropriate size or
to enlarge a particular area. You can also use the  buttons to
change the area you want to enlarge.
Colour Temperature 
Adjusts the colour...

22 USER CONTROLS
Computer / Video Mode
LANGUAGE
You can display the multi-lingual OSD menu. 
■Use the     and     keys to select your preferred 
language. 

23 USER CONTROLS
Computer / Video Mode
MANAGEMENT
Menu Location
Choose the Menu location on the display screen.
Projection
■Front-Desktop : The factory default setting.
■Rear-Desktop : When you select this function, the projector reverses the
image so you can project behind a translucent screen.
■Front-Ceiling : When you select this function, the projector turns the
image upside down for ceiling-mounted projection.
■Rear-Ceiling : When you select this function, the projector reverses and
turns the image...

24 APPENDICES
TROUBLESHOOTING
If you experience trouble with the projector, refer to the following. If the
problem persists, please contact your local reseller or service center.
PROBLEMNo image appears on the screen
■Ensure all the cables and power connections are correctly and securely connected
as described in the Installation Section.
■Ensure the pins of connectors are not crooked or broken.
■Check if the projection lamp has been securely installed. Please refer to the
Changing the Lamp Section....

25 APPENDICES
PROBLEMThe screen of the Notebook or PowerBook computer is
not displaying your presentation
■If you are using a Notebook PC:
Some Notebook PCs may deactivate their own computers’ screen when a second
display device is in use. Each of them has a different way to be re-activated. Refer
to your computer’s documentation for detailed information.
■If you are using an Apple PowerBook:
In “Control Panels”, open the PowerBook Display to select “Video Mirroring ON”.
PROBLEMImage is unstable or...

The projector will detect the lamp life itself. It will show you a warning
message“Lamp may fail soon! Replacement Suggested!”.When you see this
message, change the lamp as soon as possible. Make sure the projector has
cooled down for at least 30 minutes before changing the lamp.
■Lamp Changing Procedure
26 APPENDICES
CHANGING THE LAMP
Lamp compartment is
hot! Allow it to cool
down before changing
the lamp!!
WARNING
!
To reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp...

27 APPENDICES
SPECIFICATIONS
Light Valve
Lamp
Number of Pixels
Displayable Colour
Projection Lens
Projection Screen Size
Projection Distance
Video Compatibility
H. Frequency
V. Frequency
Power Supply
Power Consumption
Noise level
I/O Connectors
Weight
Dimensions (W x H x D)
Environmental
Safety RegulationsSingle Chip DLP™ Technology
150W User Replaceable Lamp
800 pixels(H) X 600 lines(V)
16.7M colours
F/2.4 f=22.4mm with Electronic Reduction /Enlargement
29.4"~289.7" Diagonal
4.0~39.4 ft...

28 APPENDICES
COMPATIBILITY MODES
MODERESOLUTIONV-Sync [Hz]H-Sync [KHz]
Remark!
“*” compression
computer image
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
SVGA
SVGA
SVGA
SVGA
SVGA
XGA
XGA
XGA
XGA
XGA
SXGA
Mac LC13”
Mac  II 13’
Mac  16”
Mac 19”
Mac G4
i-Mac DV640x350
640x350
640x400
640x480
640x480
640x480
640x480
720x400
720x400
800x600
800x600
800x600
800x600
800x600
*1024x768
*1024x768
*1024x768
*1024x768
*1024x768
*1280x1024
640x480
640x480
832x624
*1024x768
640x480
*1024x76870
85
85
60
72
75
85
70
85
56
60...

29