Acoustic Energy Loudspeaker Compact 1 User Manual

							COMPACT-1
www.acoustic-energy.co.uk
OWNERS MANUAL 
						

							Introduction
Congratulations on choosing the Acoustic Energy Compact 1 - a
high-power, ultra-compact two-way loudspeaker capable of 
outstanding audio performance.
With its neutral character, exceptional power handling and low
distortion, the Compact 1 is suitable for many rooms and systems alike.
Flexible with positioning, the Compact 1 speakers are happy to be
installed on dedicated stands, wall mounted (with supplied bracket) or
placed on a shelf or unit.
Finished in real-wood veneer or high gloss black, the Compact 1
is designed to ft into the modern home environment with minimal
visual impact or fuss. Smart and elegant, the Compact 1  
						

							Positioning
The Compact 1’s are very fexible with regard to positioning and are
designed to work well wherever they are located within the listening
environment. There are however some basic guidelines that should
be followed (where possible) for optimum performance:
The tweeters (high frequency drivers) should ideally be at ear level
when the listener is seated and for serious listening the grilles are
best removed where practical.
Rigid support is necessary for the speakers to deliver optium dynamic
response and detail, the rubber dics provided should also be used on
the bottom of the speaker enclosures to ensure good coupling with
the surface on which they are mounted (4 per speaker, one towards
each corner).
Room positioning: The Compact 1’s work best between 6”-18” from
the rear wall, ideally the same distance from each other as they are
from the listening position. If using them closer to the wall, corners or
on a shelf/bookcase it may be preferable to use the foam bungs
supplied in the rear ports to avoid the bass becoming “boomy”.
Experiment and listen to what works best for you, trust your own ears
and judgement.   
						

							-+
Connection
Check that your amplifer is switched of before installing your 
loudspeakers. Failure to do so may result in speaker or amplifer
damage. 
The positive cable from the amplifer positive (or red) terminal should
connect with the positive (red) terminal on the loudspeaker. Similarly
the negative cable should connect the amplifer negative terminal
(black) to the negative terminal (black) on the loudspeaker.
After wiring up, lower the volume to the minimum, switch on the
amplifer, select the signal source and then raise the volume to the
listening level required.
Amplifer (Rear)-
+ -+
- +
Compact 1
(Rear)- +
Compact 1
(Rear)
(diagram for illustration purposes only) 
						

							Specifcations
Tweeter:   28mm Fabric Dome
Mid/Bass Driver:  100mm Paper Cone
Power Handling:  100 Watts RMS (continuous undistorted input)
Frq Response:  65Hz-28kHz (+/- 3dB)
Sensitivity:  88 dB/W
Impedance:  8 ohm (6 ohm minimum)
Cabinet:    Multiple brace, pressure loaded 18mm MDF
    with rear-fring low turbulence refex port
Weight:    3.2kg per speaker
Dimensions:  220 x 150 x 200mm (H/W/D)
Finish:    High gloss piano black or Vermont walnut vinyl 
						

							Warranty
Your Acoustic Energy Compact 1 loudspeakers are guaranteed against original
defects in materials, manufacture and workmanship for 3 years from the date
of Purchase. Please retain all original packaging materials for possible future
use.
We suggest that you complete the details of purchase now and keep this
information in a safe place for future reference.
Under this warranty Acoustic Energy agrees to repair any defect or, at the
company’s discretion, replace the faulty component(s) without charge for
parts or labour. This warranty does not imply any acceptance by Acoustic
Energy or its agents for consequential loss or damage and specifcally excludes
fair wear and tear, accident, misuse or unauthorised modifcation.
This warranty is applicable in the United Kingdom only and does not in any
way limit the customer’s legal rights. Claims and enquiries under the warranty
for AE products purchased outside the UK should be addressed to the local
importers or distributors.
If you have reason to claim under the warranty please contact your dealer in
the frst instance.
Dealer’s name: ................................................................\
...............................................................
Date of purchase: .................................................................\
........................................................
Serial numbers: ...........................................................\
.................................................................. 
						

							www.acoustic-energy.co.uk
ACOUSTIC ENERGY LTD16 Bridge Road,Cirencester,
Gloucestershire, GL7 1NJ
Tel: +44(0) 1285 654432
Fax: +44(0) 1285 654430
Email: [email protected]