Acura Embedded Router AcuConnectLTEV2 VPN User Manual

1 
 
    
 
 
AcuConnect -LTE -V2 VPN  
Router  User Manual  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Acura Embedded Systems Inc.
 
 
  

2 
 
   
 
 
 
 
 
Content 
 
  Chapter 1 Product Specification .....................................................................................3 
 
  1.1 Overview ...........................................................................................................3  
  1 .2 Technical S upport
 .............................................................................................3 
  1.3 Specificatio n...

3 
 
Chapter  1 Product Specification  
 
 
1.1 Overview  
 
ACUCONNECT -LTE  router  with 4G and WIFI  provides  users the high  speed, always online and transparent  data 
trans mission communication network.  Its reliable and standard industrial design  meet the most of needs of 
Electronic Power System Automation, Industry Monitoring, Transportation Management, Weather, Environment 
Protection, Pipe Network Monitoring, Finance and Bond industries.  
 
1.2 Technical Support 
 
To enable users to...

4 
 
 
1 .4  I/O Interface and LEDs   
 
 
 
 
 
   
 
 
 
 
 
 
 
1.5 Dimen sions  
 
Dimensions  Size  (Unit: mm) 
 
 
1 .6  Note  
 
Please install the router  
and SIM card before   
inputting power.
 
 
 
 
 
 
 
 
AUX Cell A ntenna 
Reset B utton 
Wi -Fi  (LED)  
VPN  (LED)  
LAN  (LED)  
LTE  (LED)  
 
POWER  (LED)  
SIM Card Slot  
MAIN Cell A ntenna 
 
UART port  
LAN Port  
DC IN 8~30 V  
Wi -Fi Antenna  
  
 
 
 
  

5 
 
Chapter 2  Configure 
  
2 .1  Connection  
 
2 .1 .1 Computer network configuration  
 
Find “Local Area Connection”,  
and choose “Properties”  
 
 
 
 
 
 
 
 
 
 
 
 
Choose “Internet Protocol”,                                         Choose automatically or input IP manually  
 
 
 
2 .1 .2 Login the router  
 
Open the Web browser, and type  
  http://192.168.8.1  into the address  field and 
press Enter.  
Type User Name “ admin” and   
Password “ admin” in the pop- up  
  

6 
 
2 .2  Configure Parameters 
2 .2 .1 Router webpage  
 
2 .2 .2 Operation mode  
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 2 .2 .3 WAN settings 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NAT: Network 
Address Translation 
Note: The default 
setting is Gateway 
mode. 
 Bridge: All Ethernet and wireless interfaces are bridged into a single bridge interface. 
Gateway : The first Ethernet port is treated as WAN port. The other Ethernet ports 
and the wireless interface are bridged together and...

7 
 
2 .2 .4 LAN settings 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2 .2 .5 DHCP clients  
 
 
2 .2 .6 Conf igure Static Routing 
 
This section mainly introduces what is Routing Table and how to configure static routing.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Notice:  
•  Gateway and LAN IP of this router must belong to the same network segment. 
•  If the destination IP address is t he one of a host, and then the Subnet Mask must be 255.255.255.255. 
•  If the destination IP address is IP network...

8 
 
2 .2.7 V PN  
 
 
 
 
 
 
 
 
2 .2.7 .1 IPSEC  
 •  IPSec connect name:  make sure the name in client and server are same, we  suggest to use domain 
name(111.vpn1.com). if you want to build a point -to -point channel, the IPSec name have to be written as 
DEV+equipment ID+name(DEV281250D52F 2A1452.vpn1.com), and make sure both the client and server 
are inputting Client equipment ID. You can find router’s ID in the Status interface.  
•   Service Mode : Server/Client 
•   Mode : Main/Aggressive....

9 
 
•   Remote IP address: Fill the IP of the remote router.  
•   Authentication:  Commonly, Pre-Shared Key is chosen. And the Client and Server must choose the same 
key.  
•   Advanced AKE settings : There are some encryption methods in this field. You must use the settings in 
this field when VPN tunnel needs to be built between client and other brand V PN server. 
 
Example: Connected Cisco 7200 How to configure as VPN client 
 
IPSec Name: Make sure the name in client and server are  same, we...

10 
 
  2 .2. 7.2 PPTP  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2 .2 .7.3 L2TP  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2 .2 .8 DTU  
 
 
DTU settings.