Home > Acura Embedded > Router > Acura Embedded Router AcuConnectLTEV2 VPN User Manual

Acura Embedded Router AcuConnectLTEV2 VPN User Manual

Here you can view all the pages of manual Acura Embedded Router AcuConnectLTEV2 VPN User Manual. The Acura Embedded manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 11

11 
 
•   DTU status : open and close DTU  
•   Baud rate : support 300/1200/4800/9600/19200/38400/57600/115200bps  
•   Link Type : Server link or Client link can be chosen in the DTU configure table. If using it as Server, 
we suggest you to use fixed IP  of the SIM card. 
•   Multiple -path Backup : the router can support 4 Server IP at most to meet the need for multiple-
path data backup.  
•   Heart Beat function:  You can define heart beat time and heat beat information. So that Server can 
use the...

Page 12

12 
 
Master. This switchover occurs in 3 to 10 seconds.  
•   VRRP Active : Check to enabl e VRRP 
•   VRRP ID : Enter the Group ID for this set of redundant routers.  
•   Priority:  (1 -255)In a VRRP group, the larger number is Master, the smaller is Slave(backup)  
•   Interval Time : VRRP Enter the Advertisement interval(sec onds) 
•   Password:  Enter the shared group  password, or leave blank for no password.   
•   Virtual IP : All hosts in the LAN are using this IP as default gateway.  
 
 VRRP...

Page 13

13 
 
The basic parameters of Wi -Fi setting.  
The Radio  function enable and disable.  
The network mode supports 802.11 b/g/n (draft).  
Support multi -SSID up to 8.  
 
2.2 .11.2 Wireless Security/Encryption Settings 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The SSID select from multi -SSID setting.  
•   Security mode include: disable, open, share, wep auto, WPA, wpa- psk, wpa2, wpa2-psk, wpa-
psk/wpa2- psk, wpa/wpa2, 802.1X.  
•   Access policy: Set MAC list for access or block.  
 
 
2.2 .11.3 WDS...

Page 14

14 
 
2 .2 .12 Firewall  
2 .2 .12.1 MAC/IP/Port Filter Settings  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This section is mainly about MAC/IP/Port fi lter settings 
•   Basic Settings : Open the filter setting a nd set the filtering principle.  
•   MAC address: Fill the MAC  address which needs to filter.  
•   Destination IP : IP of the target computer( the computer which data packet will be sent to)  
•   Destination Port Rang e: port range of target computer  
•...

Page 15

15 
 
port. Computers and routers use ports as a way to organize network data. Different types of data, such as web 
sites, file downloads, and online games, are each assigned a port number. By using port forwarding, the router 
or firewall sends the correct data to the correct place.  
•   Virtual Server Settings : open and close Settings.  
•   IP address: fill the IP address of forwarding.   
•   Port Range : fill the Port of forwarding.  
 
2.2 .12.3 DMZ Host...

Page 16

16 
 
2 .2 .13.1 Management  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•   Select Language  
•   Administrator Settings . The default both are admin.  
•   Web Port , default P ort is 80, Support 1~65535.  
•   NTP Settings  
 
DDNS: support Dyndns.org/freedns.afraid.org/www.zoneedit.com/www.no- ip.com 
 
2 .2. 13.2 Reboot settings 
 
ICMP 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This function will detect the status of 3G by ping and complete the corresponding actions according to the ping 
result....

Page 17

17 
 
•   Check Count:  when ping detection arrives to default time, but still cannot access, then the router will 
reboot.  
•   Reboot Count before Sleep : when continuous reboot times arrive to default value, the router will enter 
sleeping mode. This setting is to prevent the router to reboot continuously when cannot ping access 
caused by service IP’s error.  
•   Sleep Time (minute ): here to set sleeping time. W hen arrives, the router will start Ping check again.  
   
  Note:  This function will...

Page 18

18 
 
2 .2 .13.5 Flow Statistics  
     Display the statistics  
      information of system flow.  
 
 
 
 
 
 
 
 
 
 
 
 
 
2.2 .13.6 System log  
 
From the system log you can read th e  
various situations after the system starts.  
 
 
 
 
 
 
 
 
 
Chapter 3  FAQ 
 
•  SIM Card Status shows “Not Ready”  
 
It means the SIM card is not found, you can   
take SIM card out, and insert it again.  
 
•   Signal Strength is normal, but can’t get WAN IP  
 
Check the APN  parameters in WAN settings....

Page 19

19 
 
1)  Check RJ45 cable, make sure it is correctly connected.  
 
2)  Make sure the PC and router are in same network segment.  
 
3)  Disable the PC network card, and re- enable it.  
4) Reset the router. Press Reset  button   
for several seconds, it will load to factory   
settings.  
 
 
 
 
 
 
 
 
Get WAN IP, but PC can’t access internet.  
 
 
 
1)   Check the DNS, you can make a ping to a normal IP (e.g. 8.8.8.8), if ping IP is ok, the question must be 
caused by DNS.   
2)   Make sure the SI...

Page 20

20 
 
 
 
 
 
With the unique set of products, Acura Embedded Systems remains committed to its goal of providing trouble-free and 
customer-friendly service. A special customer service unit has been set up specifically to cater to our esteemed customers 
needs. 
 
Technical Support:  
North American Technical support contact your Salesperson  
 
[email protected] 
 
Mailing address:  
Acura Embedded Systems Inc. 
Ph: (604) 502-9666   Fax: (604) 502-9668 
www.acuraembedded.com 
 
#101-17825 64...
Start reading Acura Embedded Router AcuConnectLTEV2 VPN User Manual

Related Manuals for Acura Embedded Router AcuConnectLTEV2 VPN User Manual

All Acura Embedded manuals