Adam Equipment Coin Counting Scale CCEUrevA4 User Manual

							9 | P a g e   © Adam Equipment Company 2009 
2.6  BACKLIGHT OPERATION 
 The  LCD  display  has  a  backlight  that  operates  autom atically.  To 
maximise  the  battery  life  it  may  be  necessary  to  tu rn  the  backlight 
off. 
 
  Hold  the  [Print]  key  for  4  seconds  to  enter  the  backlight  control 
mode. Use the  [MC / ] key to change the setting for the backlight to 
OFF, ON (set to on for full time) or AUTO (set to o n only when there 
is a weight on the scale). 
2.7  TEMPORARY
 WEIGHT DISPLAY 
  Press  and  hold  the  [CE/Esc]  key  for  4  seconds  for  the  display  to 
change the weight in the  Denomination window.   
 
  Pressing  any  key  except  the  [Tare]  and [CE/Esc]   keys  will  have  no 
effect  to  the  operation.  Pressing  [Tare]  will  operate  as  a  Tare 
function and  [CE/Esc] will return the scale to normal operation.   
2.8  SETTING
 DATE AND TIME 
The Real Time Clock (RTC) is used only for the RS-2 32 output.  The Date 
and Time can be set as required.  The scale will ke ep the clock running even 
when the power is off.    
Setting up the clock    
  Press and hold the  [1c] key when power is first turned on, release the 
key when the revision is displayed.  The initial di splays show the current 
date and time set.   
 
“  rtC        “  “ 11,14,06 ”  “16,41,35 ”  
  Press the  [CE] key to change the date and time.  The display will  show 
the current time format, “ H-m-S”. 
 
  Enter the time using the numeric keys using a 24 h our clock format, 
3:41PM is “ 154100”. 
   
  Press the  [Total/


] key to accept the time.  The display will show the  
current date format.   
 
  Press the  [MC/


]  key to change the date format. Available formats 
are:  
						

							10 | P a g e    © Adam Equipment Company 2009 
 
“Y-m-d ”   year, month, day 
“ m-d-Y ”   month, day, year 
“ d-m-Y ”   day, month, year 
 
  Press the  [Total/


] key to accept the chosen format and then enter the  
date in this format.   
 
  Press the  [Total/


] key to accept the date. 
  
An error code will be shown if the time ( Err 1) or the date ( Err 2) is not the 
permissible values.   For example, 34
th day of a month is an invalid entry. 
      
						

							11 | P a g e    © Adam Equipment Company 2009 
 
3.0  BASIC OPERATION 
3.1  ZEROING THE DISPLAY 
 
 Press  the  [>ZZZ
						

							12 | P a g e    © Adam Equipment Company 2009 
 When  both  the  product  and  container  are  removed  the  Quantity  
and  TOTAL  display will show bars “- - - - -“ as the weight i s below 
zero. 
 
  If  a  different  container  is  to  be  used,  remove  this   negative  tare 
value by pressing the  [Tare] key once more. 
 
  Any  time  the  weight  is  negative,  only  bars  will  be  shown  in  the 
TOTAL  display “- - - - - “. 
 
3.3 COIN COUNTING 
 
  To  count  coins  simply  place  the  coins  in  the  contai ner  and  press 
the  key  corresponding  to  the  value  of  the  coin.  The   displays  will 
immediately  show  the  denomination  selected  in  the  
Denomination   window,  the  number  of  coins  in  the  Quantity 
window and the value of the coins in the  TOTAL window. 
 
  The  Scale  determines  the  weight  of  the  coins  and  di vided  the 
weight by the average weight for the denomination s elected.  This 
determines  the  Quantity  of  coins.    The  total  value  is  the  quantity 
multiplied by the denomination. 
 
  It  is  necessary  to  set  an  average  weight  into  memor y  before  any 
of the token keys  [Tx] can be used.  See Sections 5.1 and 5.2 for 
more details. 
  
						

							13 | P a g e    © Adam Equipment Company 2009 
  
3.4 MEMORY
 ACCUMULATIONS 
 
 When  the  coins  have  been  counted  it  is  possible  to  store  the 
results of this sample into memory by pressing  [M+].   
 
  The  displays  will  show  a  number  corresponding  to  th e  item 
number  in  memory  ( Denomination  display  “1 ”)  and  the  total 
quantity  of  coins  counted  in  memory  ( Quantity  display)  and  the 
total  value  of  coins  that  have  been  stored  into  mem ory  (TOTAL  
display). 
 
 For Example:
 
 “    0.20 ”   “    285”  “   57.00” 
  
Press  [M+]   
 “  1   ”   “    285”  “   57.00” 
  
After 2 seconds the scale will return to normal ope ration.  Put next 
batch of coins on the scale, select denomination  [R1] 
 “   1.00 ”   “    108”  “   108.00” 
  
Press [M+] 
 “  2   ”   “    393”  “   165.00 ” 
After 2 seconds the scale will return to normal ope ration.  Put next 
batch of coins, select denomination  [10c] 
 
 “   0.10 ”   “    105”  “     10.50” 
  
						

							14 | P a g e    © Adam Equipment Company 2009 
  
Press [M+]  
 “  3   ”   “    498”  “   175.50” 
 
 After  2  seconds  the  scale  will  return  to  normal  ope ration.    The 
weight  on  the  scale  must  return  to  zero  before  anot her  value  is 
allowed to be stored into memory. 
 
NOTE :    Tokens  cannot  be  added  to  memory  as  they  do  not  h ave  a  value 
associated with them. 
 
 If tokens are to be added to memory with coins, an  error message 
will be displayed:   
 
 “   ErrOr   ”    “   TYPE”    “       ” 
After that the scale will return to normal operatio n.  
						

							15 | P a g e    © Adam Equipment Company 2009 
 
3.5 MEMORY RECALL 
 
 Pressing  the  [MR] key  will  allow  you  to  view  each  set  of  data 
stored into the memory.    
 The  first  time   [MR] is  pressed  the  first  set  of  data  is  shown  with 
Denomination  window showing “  ≡ 1   ≡” for 1 second followed by 
the  Denomination , Quantity   and TOTAL   windows  showing  the 
quantity and value for this first item. 
 
“   1   ”   “         ”  “             ” for 1 second and then 
    “      0.20”   “    285”  “     57.00” 
 Pressing  [MR] again will show the second set of data.  
  
 “   2   ”   “         ”  “             ” for 1 second and then 
“      1.00”   “    108”  “   108.00” 
 Continue to press  [MR] until the total values from the memory are 
shown: 
 
 
“    3   ”  “  TotAL ”   “  175.50 ” 
After 2 seconds the scale will return to normal ope ration. 
 
  If  [MC/  


]  is pressed when the total is shown-  
 
“     3   ”  “    498”   “  175.50” as in the above example,   
  
all data in the memory will be erased. The displays  will show Zero 
and it will return to normal weighing after 2 secon ds. 
  
						

							16 | P a g e    © Adam Equipment Company 2009 
4.0  RS-232 INTERFACE 
The  Scale  includes  a  RS-232  output  as  standard.    The  RS-232  allows  a 
record to be sent to a serial printer as work is do ne on the scale. 
  
4.1  RS-232
 OUTPUT 
 
The  RS-232  interface  is  bi-directional  with  command s  that  function  similar  to 
some of the front panel keys and other commands to  input data into the scale 
for  coin  weights,  denominations  and  symbols  used.    The  parameters  for  the 
RS-232 interface are: 
 
  
The scale does not require  RTS/CTS signals to be u sed.   
 
4.2 PRINTING 
  
The scale will output data when the following keys  are pressed.   
  
[M+]  outputs  the  current  record  at  the  same  time  as  the  results  are  stored  in 
the memory. See Section 3.4.  
Baud Rate:   300, 600, 1200, 2400, 4800 or 9600 baud 
Parity:    None, Odd or Even 
Data bits:    8 or 7 
Stop bit:    1 
Data:     ASCII  
Connector:   d-subminiature 9 pin socket (DE 9S)  
Mating connector:  d-subminiature 9 pin plug (DE 9P)  
      Pin 2    RXD Data Input  
      Pin 3    TXD Signal Output 
      Pin 5    RTS Output 
      
						

							17 | P a g e    © Adam Equipment Company 2009 
  
A display produced as shown in the previous example is as follows: 
 
“    0.20 ”   “    285”  “   57.00” 
  
Press  [M+]  
 
“   1   ”   “    285”  “   57.00” 
     
  
Printed record shows as follows: 
 
  
Any  time  the  [Total  /


]  key  is  pressed  the  current  totals  held  in  memory  ar e 
printed.    After  the  2
nd  weighing  in  the  previous  sample,  the  printed  recor d 
shows as follows:  
Date:      2009/01/05  
Time:        12:23:15  
Record           1  
Denomination     0.20 
Quantity        285 
Value    €     57.00 
 
. . . . . . . . . . .  
Date:      2009/01/05 
Time:        12:23:15 
Total  
Quantity        498  
Total  
Value      €   175.50 
  
						

							18 | P a g e    © Adam Equipment Company 2009 
  
The [MC/ 


]  key  is  active  when  the  total  values  are  displayed.   If [MC/ 


] is 
pressed the memory will be cleared.   
After 2 seconds the scale will return to normal ope ration.   
 
The  [Print]   key  will  record  a  list  of  all  sets  of  data  stored  in  the  memory  and 
the total amounts.  For the sample above, the print ed record is: 
 
 
 
Date:      2009/01/05 
Time:        12:23:15 
    
Record        1  
Denomination    0.20 
Quantity     285  
Value  €  57.00 
  
Record        2  
Denomination    1.00  
Quantity     108  
Value  €   108.00 
  
Record        3 
Denomination    0.10  
Quantity     105  
Value  €  10.50 
  
. . . . . . . . . . .
 
Total  
Quantity     498  
Total   
Value     €   175.50