Adam Equipment Coin Counting Scale CCEUrevA4 User Manual

							39 | P a g e    © Adam Equipment Company 2009 
 Place the  weight  on  the  scale. When the  scale  is  st able Press  the 
[Total /  


] key. 
 
  The display will then show: 
“   SPAN   ”   “  PASS ”   “               ” 
 
 The scale will return to the Function menu. 
 
  Press  [CE  /Esc]  to return to normal operation or  [MC/


]  to select 
a different function. 
    
						

							40 | P a g e    © Adam Equipment Company 2009 
6.2  OTHER SETTINGS 
6.2.1  Restore Factory Calibration
 
 
   To  restore  this  calibration  value  it  is  necessary  to  do  a  simple 
procedure.    Press  and  hold  the  [>Z
						

							41 | P a g e    © Adam Equipment Company 2009 
 
7.0  ERROR MESSAGES  
When  power  is  first  applied  to  the  scale  the  software  does  a  self  check  and 
then  verifies  the  voltages  from  the  load  cell  are  a cceptable.    The  display  will 
show  error  messages  if  the  voltage  is  not  within  ce rtain  limits.  If  these  error 
messages appear contact your supplier for assistanc e.   
  
ERROR  
CODE  DESCRIPTION  POSSIBLE CAUSES 
Err 1 
Error setting a date  Trying  to  set  a  date  that 
is not realistic.  
Err 2 Error setting time  Trying  to  set  a  time  that 
is not realistic. 
Err  4 Initial  Zero  is  greater  than  
allowed  (typically  4%  of  the  
maximum  capacity)  when  
power  is  turned  on  or  when 
the 
[>Z
						

							42 | P a g e © Adam Equipment Company 2009 
8

.0  SPECIFICATIONS
 
 CC_EUROPE 
Capacity,  Max 
= 20 kg 
d= 
1g 
NOTE:   Weight  is  not  displayed  except 
in special test program  
Tare Range  -20 kg 
Working 
Temperature 0ºC to 40ºC 
Platform 
225 x 275mm 
Overall 
315 x 355 x 110mm 
Battery Life  50+ hours typical* 
Power 230 VAC,  50/60 Hz.,  10 watts 
Net Weight  4.1 kg 
*Battery Life is less when the optional backlight  is used 
						

							43 | P a g e © Adam Equipment Company 2009 
9.0  WARRANTY STATEMENT 
Adam  Eq\bipme\ft  offers  Limited  Warra\fty  (Parts  a\fd  Labor)  for  the  compo\fe\fts  failed  d\be  to  defects  i\f  materials  or 
workma\fship.  Warra\fty starts from the date of delivery. 
D\bri\fg  the  warra\fty  period,  sho\bld  a\fy  repairs  be  \fecessary,  the  c\bstomer  m\bst  i\fform  the  s\bpplier  or  Adam 
Eq\bipme\ft.  The  compa\fy  or  its  a\bthorised  Tech\ficia\f  reserves  the  right  to  repair  or  replace  a\fy  compo\fe\fts  at  its 
ow\f  discretio\f.  A\fy  shippi\fg  costs  i\fvolved  i\f  se\fdi\fg  the  fa\blty  \b\fits  to  a  service  ce\ftre  is  the  c\bstomers 
respo\fsibility. 
The  warra\fty  will  cease  to  operate  if  the  eq\bipme\ft  is  \fot  ret\br\fed  i\f  the  origi\fal  packagi\fg  a\fd  with  correct 
doc\bme\ftatio\f for a claim to be processed. All claims are at the sole discretio\f of Adam Eq\bipme\ft. 
This  warra\fty  does  \fot  cover  eq\bipme\ft  where  defects  or  poor  performa\fce  is  d\be  to  mis\bse,  accide\ftal  damage,  expos\bre  to  radioactive  or  corrosive  materials,  \feglige\fce,  fa\blty  i\fstallatio\f,  \b\fa\bthorised  modificatio\fs  or 
attempted repair or fail\bre to observe the req\bireme\fts a\fd recomme\fdatio\fs as give\f i\f this User Ma\f\bal. 
Repairs  carried  o\bt  \b\fder  the  warra\fty  does  \fot  exte\fd  the  warra\fty  period.  Compo\fe\fts  removed  d\bri\fg  the 
warra\fty repairs become the compa\fy property. 
The  stat\btory  right  of  the  p\brchaser  is  \fot  affected  by  this  warra\fty.  The  terms  of  this  warra\fty  is  gover\fed  by  the  
Laws  of  E\fgla\fd  a\fd  Wales.  For  complete  details  o\f  Warra\fty  I\fformatio\f,  see  the  terms  a\fd  co\fditio\fs  of  sale 
available o\f o\br web-site.  
						

							44 | P a g e © Adam Equipment Company 2009  
						

							© Adam Equipment Company 2009 
M\fn\bf\fct\brer’s Decl\fr\ftion of Conformity 
This  prod\bct  has  bee\f  ma\f\bfact\bred  i\f  accorda\fce  with  the 
harmo\fized  E\bropea\f  sta\fdards,  followi\fg  the  provisio\fs  of  the 
below stated directives: 
Electro Mag\fetic Compatibility Directive 2004/108/EC 
Low Voltage Directive 2006/95/EC 
Adam Eq\bipme\ft Co. Ltd. 
B
o\fd Ave\f\be, De\fbigh East 
Milto\f Key\fes, MK1 1SW 
U\fited Ki\fgdom 
FCC COMPLIANCE 
This  eq\bipme\ft  has  bee\f  tested  a\fd  fo\b\fd  to  comply  with  the  limits  for  a  Class  A  digital  device, 
p\brs\ba\ft  to  Part  15  of  the  FCC  R\bles.    These  limits  are  desig\fed  to  provide  reaso\fable  protectio\f 
agai\fst  harmf\bl  i\fterfere\fce  whe\f  the  eq\bipme\ft  is  operated  i\f  a  commercial  e\fviro\fme\ft.    The 
eq\bipme\ft ge\ferates, \bses, a\fd  ca\f  radiate radio freq\be\fcy e\fergy a\fd,  if \fot i\fstalled  a\fd  \bsed  i\f 
accorda\fce  with  the  i\fstr\bctio\f  ma\f\bal,  may  ca\bse  harmf\bl  i\fterfere\fce  to  radio  comm\b\ficatio\fs. 
Operatio\f of this eq\bipme\ft i\f a reside\ftial area is likely to ca\bse harmf\bl i\fterfere\fce i\f which case 
the \bser will be req\bired to correct the i\fterfere\fce at his ow\f expe\fse. 
Shielded  i\fterco\f\fect  cables  m\bst  be  employed  with  this  eq\bipme\ft  to  i\fs\bre  complia\fce  with  the 
perti\fe\ft RF emissio\f limits gover\fi\fg this device. 
Cha\fges or modificatio\fs \fot ex
pressly approved by Adam Eq\bipme\ft co\bld void the \bser's a\bthority 
to operate the eq\bipme\ft. 
WEEE COMPLIANCE 
A\fy  Electrical  or  Electro\fic  Eq\bipme\ft  (EEE)  compo\fe\ft  or  assembly  of  parts  i\fte\fded  to  be 
i\fcorporated  i\fto  EEE  devices  as  defi\fed  by  E\bropea\f  Directive  2002/95/EEC  m\bst  be  recycled  or 
disposed  \bsi\fg  tech\fiq\bes  that  do  \fot  i\ftrod\bce  hazardo\bs  s\bbsta\fces  harmf\bl  to  o\br  health  or  the 
e\fviro\fme\ft  as  listed  i\f  Directive  2002/95/EC  or  ame\fdi\fg  legislatio\f.    Battery  disposal  i\f  La\fdfill 
Sites is more reg\blated si\fce J\bly 2002 by reg\blatio\f 9 of the La\fdfill (E\fgla\fd a\fd Wales) Reg\blatio\fs 
2002  a\fd  Hazardo\bs  Waste  Reg\blatio\fs  2005. Battery  recycli\fg  has  become  topical  a\fd  the  Waste 
Electrical a\fd Electro\fic Eq\bipme\ft (WEEE) Reg\blatio\fs are set to impose targets for recycli\fg.     
						

							© Adam Equipment Company 2009 
A

DAM  EQUIPMENT
  is  a\f  ISO  9001:2000  certified  global  compa\fy  with  more  tha\f  35  years 
experie\fce i\f the prod\bctio\f a\fd sale of electro\fic weighi\fg eq\bipme\ft.  
For a complete listi\fg of all Adam scales a\fd bala\fces visit o\br website at: 
www.adamequipment.com  
©  Copyright  by  Adam  Eq\bipme\ft  Co.  Ltd.    All  rights  reserved.    No  part  of  this 
p\bblicatio\f may be repri\fted or tra\fslated i\f a\fy form or by a\fy mea\fs witho\bt the 
prior permissio\f of Adam Eq\bipme\ft. 
Adam  Eq\bipme\ft  reserves  the  right  to  make  cha\fges  to  the  tech\fology,  feat\bres, 
specificatio\fs a\fd desig\f of the eq\bipme\ft witho\bt \fotice. 
All  i\fformatio\f  co\ftai\fed  withi\f  this  p\bblicatio\f  is  to  the  best  of  o\br  k\fowledge 
timely,  complete  a\fd  acc\brate  whe\f  iss\bed.    However,  we  are  \fot  respo\fsible  for 
misi\fterpretatio\fs which may res\blt from the readi\fg of this material. 
The latest versio\f of this p\bblicatio\f ca\f be fo\b\fd o\f o\br Website. 
He\fd Office:  
Adam Equipment Co. Ltd. 
Maidstone Road, Kingston, 
Milton Keynes, MK10 0BD 
United Kingdom 
Tel: +44 (0)1908 274545 Fax: 
+44 (0)1908 641339 
sales@adameq\bipme\ft.co\t.\bk 

For regio\fal office worldwide visit www.adameq\bipme\ft.com