Adam Equipment GK Indicator GKREVL1 User Manual

 
29                              © Adam Equipment Company 2013 
1.11.  ACCUMULATED TOTAL  
 
The  indicator  can  be  set  to  accumulate  when  a  weigh t  is  added  to  the  platform 
automatically or manually by pressing  [Print]. See Section 13.2. 
NOTE:    1. The  accumulation  function  is  available  only  during  weighing.    It  is  disabled 
during parts counting or percent weighing. 
 
2. The  accumulated  weights  will  be  stored  in  either  kg   or  lb,    depending  upon 
the weighing...

 
30                              © Adam Equipment Company 2013 
 
·   When  the  indicator  is  at  zero  place  a  second  weight   on  the  platform.  
When  stable  press  [Print] to  accumulate  the  weight.  The  display  will 
show  "ACC   2"  for 2 seconds and then show the new total. 
 
 
 
 
   
·  Continue until all weights have been added. This ca n continue for up to 
99 entries until the capacity of display is exceede d. 
 
·  To view the total in memory press the   [Print] key when...

 
31                              © Adam Equipment Company 2013 
  
1.11.2 AUTOMATIC ACCUMULATION 
 
When  the  indicator  has  been  set  to  Automatic  Accumu lation  the  value  is  stored  in 
memory automatically.     
 
·   Place a weight on the platform. The beeper will sou nd when the display 
is stable indicating the value is accepted.  Remove  the weight. 
 
·  The display will show  "ACC 1" and then the total in the memory before it 
returns to zero.   Adding a 2nd weight will repeat...

 
32                              © Adam Equipment Company 2013 
 
RS-232 SPECIFICATION 
The  GK  indicator  is  supplied  with  bi-directional  RS -232  interface  as  standard.  The 
indicator  when  connected  to  a  printer  or  computer  o utputs  the  weight  with  the 
selected weighing unit through the RS-232 interface . 
  Default Specifications: 
            
Connector:          
 
     
The indicator can be set to print text in English,  French, German or Spanish.  See the 
RS-232 parameters...

 
33                              © Adam Equipment Company 2013 
LABEL = On  Label Formats are printed  
Data Format-Normal Output:  
Only  weight  value  along  with  the  weighing  unit  is  p rinted.    If  Percent  weighing  is 
used then % is shown in place of weighing units.    
Data Format-Parts Counting Output:  
Weight, Unit weight and number of parts are printed . 
                     
 
Date           12/09/2006  
Time           14:56:27     
  
Scale ID    123456     
         If ID is zero,...

 
34                              © Adam Equipment Company 2013 
 
                     
  
Date           12/09/2006   
Time           14:56:27    
 
Scale ID    123456      
User ID    234567      
  
Net Wt.        1.234 kg         
Net Wt. (or Gross Wt.) 
Unit Wt.         123 g     g    
for metric and lb for pounds 
PCS               10 pcs    
                     
  

 
35                              © Adam Equipment Company 2013 
  
Data Format- Memory Recall Output:    
Data Format- Continuous Output- Normal weighing:    
Data Format- Continuous Output- Parts Counting:   
 
Date            12/09/2006   
Time            14:56:27    
 
Scale ID   123456      
User ID     234567      
 
------------------
                                     
TOTAL  
No.               5        
Wt.           1.234 kg     
PCS              10 pcs...

 
36                              © Adam Equipment Company 2013 
LABEL = Off  single line output  
Fixed line width, leading zeros are spaces.  
 Data Format-Normal Output: 
 Data Format- Memory Recall Print: 
NOTE: 
  1. The  accumulated  total  will  not  be  sent  to  the  RS-23 2  when  the  continuous 
print is turned on.   
 
2. The continuous print will only be for the current w eight and the display data.  
 
3. In other languages the format is the same but the t ext will be in the language...

 
37                              © Adam Equipment Company 2013 
 
Description  ENGLISH  FRENCH  GERMAN   SPANISH  
Net weight  Net Wt.  Pds Net  Net-Gew  Pso Net 
Weight per unit  
counted  Unit Wt.  Pds unit  Gew/Einh  Pso/Unid 
Number of items 
counted  Pcs  Pcs  Stck.  Piezas 
Number of  
weighing  added  
to subtotals  No.  Nb.  Anzhl  Num. 
Total weight and 
count printed  Total  Total  Gesamt  Total 
Print date  Date  Date  Datum  Fecha 
Print time  Time  Heure  Zeit  Hora 
Scale ID number  Scale...

 
38                              © Adam Equipment Company 2013 
 
1.12.  INPUT COMMANDS FORMAT 
  
The indicator can be controlled with the following  commands. Press the [Enter] key 
of the PC after each command.     
T    Tares  the  indicator  to  display  the  net  weight.  This
  is  the  same  as 
pressing  [Tare]. 
 
Z     Sets the zero point for all subsequent weighing. Th
e display shows 
zero.   
P      Prints  the  results  to  a  PC  or  printer  using  the  RS-
232  interface.  It 
also...