Adam Equipment GK Indicator GKREVL1 User Manual
Have a look at the manual Adam Equipment GK Indicator GKREVL1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 35 Adam Equipment manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
54 © Adam Equipment Company 2013
Apply power to the indicator. If the jumper has be en used the display will ask for a
code number, “Pn “ on the Weight Display immediately. Or press the [Tare] key
during the time the calibration counters are being displayed.
Enter the number 2006 when “Pn “ is displayed and then press [Tare].
The displays will show the first parameters, called “F1” “CAL”.
To select another parameter press the...](http://img.usermanuals.tech/thumb/168/2139/w64_gk-indicator-gkrevl1-1478547721_d-55.png "Page 56
54 © Adam Equipment Company 2013
Apply power to the indicator. If the jumper has be en used the display will ask for a
code number, “Pn “ on the Weight Display immediately. Or press the [Tare] key
during the time the calibration counters are being displayed.
Enter the number 2006 when “Pn “ is displayed and then press [Tare].
The displays will show the first parameters, called “F1” “CAL”.
To select another parameter press the...")
![Page 57
55 © Adam Equipment Company 2013
1.18.1 F1 -CALIBRATION
To enter the calibration parameter, press the [Tare] key when “F1” is displayed. The
indicator will be calibrated using 2 masses of appr oximately 1/3Maximum and
Maximum. If the indicator has been calibrated once the values will be stored. If this
is the first time the indictor is calibrated the us er must enter the values for the
calibration masses.
It is necessary to set...](http://img.usermanuals.tech/thumb/168/2139/w64_gk-indicator-gkrevl1-1478547721_d-56.png "Page 57
55 © Adam Equipment Company 2013
1.18.1 F1 -CALIBRATION
To enter the calibration parameter, press the [Tare] key when “F1” is displayed. The
indicator will be calibrated using 2 masses of appr oximately 1/3Maximum and
Maximum. If the indicator has been calibrated once the values will be stored. If this
is the first time the indictor is calibrated the us er must enter the values for the
calibration masses.
It is necessary to set...")
![Page 58
56 © Adam Equipment Company 2013
Switch off the indicator, and switch it on again to continue with the other Service
parameters.
1.18.2 F2–DECIMAL POINT POSITION
To set the value for the decimal point location. The options are 0, 0.0, 0.00,
0.000, 0.0000
To enter this parameter, press the [Tare] key when “F2 dEC” is shown.
The display will show the current setting.
Press the [Func] key to change the value....](http://img.usermanuals.tech/thumb/168/2139/w64_gk-indicator-gkrevl1-1478547721_d-57.png "Page 58
56 © Adam Equipment Company 2013
Switch off the indicator, and switch it on again to continue with the other Service
parameters.
1.18.2 F2–DECIMAL POINT POSITION
To set the value for the decimal point location. The options are 0, 0.0, 0.00,
0.000, 0.0000
To enter this parameter, press the [Tare] key when “F2 dEC” is shown.
The display will show the current setting.
Press the [Func] key to change the value....")
![Page 59
57 © Adam Equipment Company 2013
The display will show the current increment value a s used with the current decimal
point position.
Press the [Func] key to change the value. Select from 1,2,5,10, 20 or 50
Not all increments may be available for the capacit y you selected.
For EC Approved versions the indicator will determi ne the increment that maintains
the number of divisions to be 3000 or less.
Press [Tare] to accept the displayed value.
Press [Zero] to...](http://img.usermanuals.tech/thumb/168/2139/w64_gk-indicator-gkrevl1-1478547721_d-58.png "Page 59
57 © Adam Equipment Company 2013
The display will show the current increment value a s used with the current decimal
point position.
Press the [Func] key to change the value. Select from 1,2,5,10, 20 or 50
Not all increments may be available for the capacit y you selected.
For EC Approved versions the indicator will determi ne the increment that maintains
the number of divisions to be 3000 or less.
Press [Tare] to accept the displayed value.
Press [Zero] to...")
![Page 60
58 © Adam Equipment Company 2013
Press [Tare] to accept the value.
Press [Zero] to return to weighing.
1.18.6 F6 -SUCCESSIVE TARE
To enter this parameter, press the [Tare] key when “ F6 SCS” is shown.
The display will show if the successive tare is on or off.
Press the [Func] key to change the value.
Press [Tare] to accept the displayed value.
Press [Zero] to return to weighing.
1.18.7 F7 –ADC COUNTS
To enter this parameter, press the...](http://img.usermanuals.tech/thumb/168/2139/w64_gk-indicator-gkrevl1-1478547721_d-59.png "Page 60
58 © Adam Equipment Company 2013
Press [Tare] to accept the value.
Press [Zero] to return to weighing.
1.18.6 F6 -SUCCESSIVE TARE
To enter this parameter, press the [Tare] key when “ F6 SCS” is shown.
The display will show if the successive tare is on or off.
Press the [Func] key to change the value.
Press [Tare] to accept the displayed value.
Press [Zero] to return to weighing.
1.18.7 F7 –ADC COUNTS
To enter this parameter, press the...")
![Page 61
59 © Adam Equipment Company 2013
1.18.8 F8 –ZERO MODE
To enter this parameter, press the [Tare] key when “ F8 ZEm” is shown.
Select the Zero mode desired. In all but special ca ses Zero Mode 1 is used. The
other 2 zero modes are for unique locations in the world and effect the +/- range of
the zero.
Press the [Func] key to change the value.
Press [Tare] to accept the displayed value.
Press [Zero] to return to weighing.
1.18.9...](http://img.usermanuals.tech/thumb/168/2139/w64_gk-indicator-gkrevl1-1478547721_d-60.png "Page 61
59 © Adam Equipment Company 2013
1.18.8 F8 –ZERO MODE
To enter this parameter, press the [Tare] key when “ F8 ZEm” is shown.
Select the Zero mode desired. In all but special ca ses Zero Mode 1 is used. The
other 2 zero modes are for unique locations in the world and effect the +/- range of
the zero.
Press the [Func] key to change the value.
Press [Tare] to accept the displayed value.
Press [Zero] to return to weighing.
1.18.9...")
![Page 62
60 © Adam Equipment Company 2013
1.18.10 F10 –CALIBRATION COUNT (GK-M ONLY)
This parameter allows the calibration and parameter counting function to be active.
To enter this parameter, press the [Tare] key when “F10 Cn” is shown.
The display will show if the Calibration Counting Mode is set to on or oFF. If On the
Calibration count and Parameter count will be seen at power on as described in
section 6.0. If set to Off the only method...](http://img.usermanuals.tech/thumb/168/2139/w64_gk-indicator-gkrevl1-1478547721_d-61.png "Page 62
60 © Adam Equipment Company 2013
1.18.10 F10 –CALIBRATION COUNT (GK-M ONLY)
This parameter allows the calibration and parameter counting function to be active.
To enter this parameter, press the [Tare] key when “F10 Cn” is shown.
The display will show if the Calibration Counting Mode is set to on or oFF. If On the
Calibration count and Parameter count will be seen at power on as described in
section 6.0. If set to Off the only method...")
59 © Adam Equipment Company 2013 1.18.8 F8 –ZERO MODE To enter this parameter, press the [Tare] key when “ F8 ZEm” is shown. Select the Zero mode desired. In all but special ca ses Zero Mode 1 is used. The other 2 zero modes are for unique locations in the world and effect the +/- range of the zero. Press the [Func] key to change the value. Press [Tare] to accept the displayed value. Press [Zero] to return to weighing. 1.18.9 F9 –LOW VOLTAGE DETECTION This parameter allows detection of low voltage when the battery wears down. To enter this parameter, press the [Tare] key when “F9 LVd” is shown. The display will show if the LVD Mode is set to on or oFF. Press the [Func] key to change the value. Press [Tare] to accept the displayed value. Press [Zero] to return to weighing.
60 © Adam Equipment Company 2013 1.18.10 F10 –CALIBRATION COUNT (GK-M ONLY) This parameter allows the calibration and parameter counting function to be active. To enter this parameter, press the [Tare] key when “F10 Cn” is shown. The display will show if the Calibration Counting Mode is set to on or oFF. If On the Calibration count and Parameter count will be seen at power on as described in section 6.0. If set to Off the only method that ca n be used for access to the calibration or parameters is to place the jumper on pins 1-2 of J1, See section 15.2. Press the [Func] key to change the value. Press [Tare] to accept the displayed value. Press [Zero] to return to weighing. 1.18.11 F10 –AUTO ZERO RANGE (NOT AVAILABLE ON GK-M) This parameter set the range the autozero is active within. To enter this parameter, press the [Tare] key when “F10 Az” is shown. The display will show the current setting, 0.5d, 1d , 2d, or 5d. Press the [Func] key to change the value. Press [Tare] to accept the displayed value. Press [Zero] to return to weighing.
61 © Adam Equipment Company 2013 REPLACEMENT PARTS AND ACCESSORIES If you need to order any spare parts and accessorie s, contact your supplier or Adam Equipment. A partial list of such items is as follo ws- · Main Power cord or adaptor for USA versions. · Replacement Battery · In use cover · Printer, etc.
62 © Adam Equipment Company 2013
SERVICE INFORMATION
This manual covers the details of operation. If you have a problem with the indicator
that is not directly addressed by this manual then contact your supplier for
assistance. In order to provide further assistance, the supplier will need the
following information which should be kept ready:
A. Details of your company
-Name of your company:
-Contact person’s name:
-Contact telephone, e-mail,
fax or any other methods:
B. Details of the unit purchased
(This part of information should always be availa ble for any future correspondence.
We suggest you to fill in this form as soon as the unit is received and keep a print-out in
your record for ready reference.)
Model name of the indicator: GK_____
Serial number of the unit:
Software revision number
(Displayed when power is first turned on):
Date of Purchase:
Name of the supplier and place:
C. Brief description of the problem
Include any recent history of the unit. For example :
-Has it been working since it’s delivered
-Has it been in contact with water
-Damaged from a fire
-Electrical Storms in the area
-Dropped on the floor, etc.
63 © Adam Equipment Company 2013
WARRANTY INFORMATION
Adam Equipment offers Limited Warranty (Parts and L abour) for the components failed due to defects
in materials or workmanship. Warranty starts from the date of delivery.
During the warranty period, should any repairs be n ecessary, the purchaser must inform its supplier or
Adam Equipment Company. The company or its authoris ed Technician reserves the right to repair or
replace the components at any of its workshops depending on the severity of the problems. However,
any freight involved in sending the faulty units or parts to the service centre should be borne by the
purchaser.
The warranty will cease to operate if the equipment is not returned in the original packaging and with
correct documentation for a claim to be processed. All claims are at the sole discretion of Adam
Equipment.
This warranty does not cover equipment where defect s or poor performance is due to misuse,
accidental damage, exposure to radioactive or corrosive materials, negligence, faulty installation,
unauthorised modifications or attempted repair or f ailure to observe the requirements and
recommendations as given in this User Manual.
Repairs carried out under the warranty does not extend the warranty period. Components removed
during the warranty repairs become the company prop erty.
The statutory right of the purchaser is not affected by this warranty. The terms of this warranty is
governed by the UK law. For complete details on War ranty Information, see the terms and conditions
of sale available on our web-site.
65 © Adam Equipment Company 2013 APPENDIX PARAMETER LAYOUT for GK / GFK SCALES Press the [Func] key to e\fter F\b\fctio\fs mode. K ey f\b\fctio\fs while i\f this sectio\f [Tar\f] e\fter a parameter or accept the cha\fges [Func ] move to \fext parameter or optio\f [Z\fro] ret\br\f to previo\bs parameter or ret\br\f to weighi\fg FUNC 1 Check weighi\fg parameters F1 LLk Limit Lock oFF P St (pre-set) F2 L\fd LED display bAr (Bar type) S pot (spot type) S PEA (whole segme\ft) F3 bEP Beeper Co\ftrol bP oFF b P Int (I\fside Limits) b P otL (O\btside Limits) F4 CPS Check weighi\fg password E\fter \bsi\fg \f\bmeric method F5 NCk Negative Check weighi\fg On Off FUNC 2 RS-232 Parameters C1 on E\fable RS-232 Prt on Prt oFF C2 bd Ba\bd Rate 600 To 19200 C3 Prm Pri\fti\fg Mode mA StA (Ma\f\bal Stable) mA A\fY (Ma\f\bal A\fy) A\b StA (A\bto Stable) A\b E\fd (A\bto E\fd) Ct StA (co\fti\f\bo\bs Stable) Ct AnY (Co\fti\f\bo\bs A\fy) C4 Aon E\fable Acc\bm\blatio\f on oFF C5 Ln La\fg\bage for pri\fti\fg English Fr\fnch G\frman Spanish C6 Uid User ID E\fter \bsi\fg \f\bmeric keys C7 Sid Scale ID E\fter \bsi\fg \f\bmeric keys C8 LAb LAb O\f Lab Off FUNC 3 Scale Parameters S1 Un U\fits e\fable kg lb S2 bL Backlight EL oFF EL on E L AU (A\bto) S3 AoF Set A\bto off time (mi\f.) SLP 0 SLP 1 SLP 5 S LP 10 S4 dt Set time a\fd date Set as described i\f ma\f\bal S5 dIS Display mode All StAb (o\fly whe\f stable) S6 Fi Set Filter SLoW nor (\formal) F ASt S7 SPS Scale password E\fter \bsi\fg \f\bmeric keys S8 CAL Perform calibratio\f FUNC 4 Scale Parameters F4 Pct Perce\ft Weighi\fg E\fter 100% refere\fce weight F4 Ani A\fimal weighi\fg FLt 1 Filter setti\fg To FLt 5
67 Adam Equipment Company 2013 Adam Equipment ADAM EQUIPMENT, Maidstone Road, Kingston Milton Keynes, MK10 0BD U.K. Tel: (01908) 274545 Fax: (01908) 641339 Intl Tel: -44 1908 -274545 Intl Fax: -44 1908 641339 E-Mail Address: [email protected] D eclaration of Conformity Verklaring van overeenstemming Konformitätserklärung Dichiarazione di Conformità Déclaration de Conformité Declaración de Conformidad The non-automatic weighing instrument Het niet –automatische weegwerktuig Die nicht- automatischen Wägeapparate Strumento per pesatura non automatico L’instrument de pesage à fonctionnement non automatique Imstrumento para pesaje non automatico Manufacturer : Adam Equipment Co. Ltd. Hersteller : Adam Equipment Co. Ltd. Fabricant : Adam Equipment Co. Ltd. Type: GK..M / GFK..M / GBK..M Typ: GK..M / GFK..M / GBK..M Type: GK..M / GFK..M / GBK..M No of the EC type-approval certificate: UK2860 GB1320 Nr. der EG- Bauartzulassung: UK2860 GB1320 N du certificate d’approbation CE de type: UK2860 GB1320 Corresponds to the production model described in the EC type-approval certificate and to the requirements of the Council Directive 2009/23/EC as amended and to the requirements of the following EC Directives: Entspricht dem in der Bescheinigung über die Bauartzulassung beschriebenen Baumuster, sowie den Anforderungen der EG-Richtlinie 2009/23/EC in der jeweils geltenden Fassung und den Anforderungen folgender EG-Richtlinien: Correspond au modèle décrit dans le certificat d’approbation CE de type, aux exigences de la directive 2009/23/EC modifiée et aux exigences des directives CE suivantes: 2006/95/EC Electrical equipment for use within certain voltage limits (Low Voltage Directive) 2006/95/EC Elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen (Niederspannungsrichtlinie) 2006/95/EC Matériel électrique pour utilisation dans des limites de tension définies (Directive Basse Tension) 2004/108/EC Electromagnetic compatibility 2004/108/EC Elektromagnetische Verträglichkeit 2004/108/EC Compatibilité électromagnétique This declaration is only valid when accompanied by a Certificate of Conformity issued by a Notified Body. Diese Erklärung gilt nur in Verbindung mit einer Konformitätsbescheinigung einer benannten Stelle Cette déclaration est seulement valide quand elle est accompagnée par une Attestation de Conformité délivrée par un Organisme Notifié. Fabrikant : Adam Equipment Co. Ltd. Produttore Adam Equipment Co. Ltd. Fabricante Adam Equipment Co. Ltd. Type: GK..M / GFK..M / GBK..M Modello: GK..M / GFK..M / GBK..M Tipo: GK..M / GFK..M / GBK..M Nummer van de Verklarling van EG- typegoedkeuring UK2860 GB1320 N. di certificato di approvazione di tipo CE UK2860 GB1320 Numaro del certificado de aprobacion de tipo CE: UK2860 GB1320 Conform met het model beschreven in de verklaring van EG-typegoedkeuring en met de voorschriften van EG richtlijn 2009/23/EC zoals gewijzigd en met de volgende EG richtlijnen: Conforme al modello di produzione descritto nel certificato di approvazione de tipo CE e secondo le richieste CE direttivo 2009/23/EC come modificato e secondo le rechieste della seguente directive CE Conforme al modello di producion descrito nel certificado di aprobacion del tipo CE e segun los requisitos del CE diretiva 2009/23/EC como modificato e segun los requisitos della siguiente diretive CE 2006/95/EC Laagspanning richtlijn 2006/95/EC Strumenti elettrici per uso entro certi limiti di voltaggio ( Directivo di voltaggio basso) 2006/95/EC Instrumentos electricos para uso dentro cierti limites del voltaje ( Diretivo di voltaje bajo ) 2004/108/EC EMC richtlijn 2004/108/EC Compatibilita electromagnetico 2004/108/EC Compatibilidad electromagnetico Deze verklaring is alleen geldig samen met een certificaat van overeenstemming afgegeven door een bevoegde instantie. Questa dichiarazione e valida solamente se accompagniato da un certificato di conformita relaciato da un ente riconosciuto. Esta declaracion es valida solamente si accompagniato a un certificado da conformidad emitida par un organismo notificado. Signature Date Unterschrift Datum Signature Date 22 July 2011 Handtekening Datum Firma Date Firma Fache J.S. C\bmbach Tech\fical Ma\fager