Adam Equipment PGW Precision Balances PGWMrevB1 User Manual

 
© Adam Equipment Company 2011  
39
  
Poor Eccentric loading  A mechanical problem  Inspect
 the area around the pan for hair, 
dust or other obstructions,    
*Inspection of the mechanics may be  
needed for any possible problems.  
*Readjusting of the Eccentric loading is  
recommended.   
Poor Linearity  Usually a mechanical  problem    
  
Electronic Problems Re-check repeatability 
*Inspection of the flexures for damage  
or loose hardware may be required  
*Use the Linearity Function in the...

 
© Adam Equipment Company 2011  
40
  
OTHER PROBLEMS: 
Does not calibrate  
automatically 
Zero shifted more 
than allowed 
 
Calibration timeout *Check all flexures for damage  
*Reset factory calibration 
*Verify linearity and repeatability  
*The balance may be unstable.  Verify  
stability as above.     
Calibration weight  
motor does not stop 
   
 
  *Check the cables to the motor, try  
plugging the balance into the power 
again  
*Look for friction in the calibration  
weight movement  
*Check...

 
© Adam Equipment Company 2011  
41
17  BALANCE SECURITY SEALING 
 
 
  
The  PGW..M  Balances  are  sealed  to  prevent  unauthori sed  access  to  the 
circuit  boards  inside  by  placing  the  tamper-proof  s eals  on  one  or  both  the 
rear  screws.  Metrology  labels  and  additional  securi ty  measures  may  be 
added to the scale as required by the national legi slation. 
  
 
WARNING:  ANY  MODIFICATIONS  DONE  TO  THE  MECHANISMS  INSIDE  BY  
BREAKING  THE  SECURITY  SEALS  MAY  MAKE  IT...

Page 42 of 52 
 
© Adam Equipment Company 2011  
42
 
Adam Equipment  
ADAM EQUIPMENT, BOND AVENUE, DENBIGH EAST INDUSTRIA L ESTATE,  
MILTON KEYNES, MK1  1SW, U.K. 
    Declaration of Conformity               Verklaring  van overeenstemming 
Konformitätserklärung                     Dichiaraz ione di Conformità 
Déclaration de Conformité               Declaración  de Conformidad
 
  
The non-automatic weighing instrument                                                          Het niet –automatische...

Page 43 of 52 
 
© Adam Equipment Company 2011  
43
  

 
 
© Adam Equipment Company 2011                             
44
 
18  BALANCE MENU DIAGRAMS 
   

 
 
© Adam Equipment Company 2011                             
45
   

©

 Adam Equipment Company 2011  
46
19  REPLACEMENT PARTS AND ACCESSORIES 
If you need to order any spare parts and accessories, contact your supplier or 
Adam Equipment. A partial list of such items is as follows- 
·Power Supply Module
· Stainless Steel top Pan
· Below Balance Hanger
· Density Determination Kit ·
Anti-Vibration Table
· Security Lock and Cable
· Dust Cover
· Printers, etc.
20  SERVICE INFORMATION 
This  manual  covers  the  details  of  operation.  If  you  have  a  problem  with  the...

©

 Adam Equipment Company 2011  
47
W

ARRANTY INFORMATION 
Adam  Equipment  offers  Limited  Warranty  (Parts  and  Labour)  for  the 
components failed due to defects in materials or workmanship.  Warranty 
starts from the date of delivery. 
During  the  warranty  period,  should  any  repairs  be  necessary,  the 
purchaser  must  inform  its  supplier  or  Adam  Equipment  Company.  The 
company  or  its  authorised  Technician  reserves  the  right  to  repair  or 
replace  the  components  at  any...

©

 Adam Equipment Company 2011  
48