Adam Equipment PGW Precision Balances PGWMrevB1 User Manual

							© Adam Equipment Company 2011 
49
Manufacturer’s Declaration of Conformity 
This product has been manufactured in accordance with the harmonised European standards,  following the provisions of the below stated directives: 
Electro Magnetic Compatibility Directive 2004/108/EC 
Low Voltage Directive 2006/95/EC 
 Adam Equipment Co. Ltd. 
Maidstone Road, Kingston, Milton Keynes, MK10 0BD  United Kingdom 

F
CC COMPLIANCE 
This  equipment  has  been  tested  and  found  to  comply  w
 ith  the  limits  for  a  Class  A  digital  device, 
pursuant  to  Part  15  of  the  FCC  Rules.    These  limits  are  designed  to  provide  reasonable  protection 
against  harmful  interference  when  the  equipment  is  operated  in  a  commercial  environment.    The 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance  with  the  instruction  manual,  may  cause  harmful  interference  to  radio  communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his own expense. 
Shielded  interconnect  cables  must  be  employed  with  t
 his  equipment  to  insure  compliance  with  the 
pertinent RF emission limits governing this device. 
Changes  or  modifications  not  expressly  approved  by  A
 dam  Equipment  could  void  the  users 
authority to operate the equipment. 
WEEE COMPLIANCE 
Any  Electrical  or  Electronic  Equipment  (EEE)  component  or  assembly  of  parts  intended  to  be 
incorporated  into  EEE  devices  as  defined  by  European  Directive  2002/95/EEC  must  be  recycled  or 
disposed using techniques  that  do  not introduce hazardous substances harmful to our health or  the 
environment  as  listed  in  Directive  2002/95/EC  or  amending  legislation.    Battery  disposal  in  Landfill 
Sites  is  more  regulated  since  July  2002  by  regulation  9  of  the  Landfill  (England  and  W ales) 
Regulations  2002  and  Hazardous  Waste  Regulations  2005.  Battery  recycling  has  become  topical 
and  the  W aste  Electrical  and  Electronic  Equipment  (WEEE)  Regulations  are  set  to  impose  targets 
for recycling.     
						

							©

 Adam Equipment Company 2011  
50
©

 Copyright by Adam Equipment Co. Ltd.  All rights reserved.  No part of this publication 
may be reprinted or translated in any form or by any means without the prior permission of  Adam Equipment. 
Adam Equipment reserves the right to make changes to the technology, features,  specifications and design of the equipment without notice. 
All information contained within this publication is to the best of our knowledge timely,  complete and accurate when issued.  However, we are not responsible for misinterpretations which may result from the reading of this material. 
The latest version of this publication can be found on our Website.  www.adamequipment.com
 
A
DAM EQUIPMENT  is an ISO 9001:2000 certified global company with more than 35 
years experience in the production and sale of electronic weighing equipment.  
Adam products are predominantly designed for the Laboratory, Educational, Medical, 
retail and Industrial Segments. The product range can be described as follows: 
-Analytical and Precision Balances 
-Compact and Portable Balances 
-High Capacity Balances 
-Moisture analysers / balances 
-Mechanical Scales  
-Counting Scales 
-Digital Weighing/Check-weighing Scales 
-High performance Platform Scales  
-Crane scales 
-Medical Scales 
-Retail Scales for Price computing 
For a complete listing of all Adam products visit our website at  www.adamequipment.com