Adam Equipment SHS Crane Scales SHSSHSaREVB User Manual

© Adam Equipment Company 2012 
Adam Eq\bipme\ft 
SHS/SHSa SER\bES 
(P.N. 7.00.6.6.0202, Revisio\f B November 2012) 
Software versio\f S1.1/SA1.1   

   1          © Adam Equipment Company 2012 
  
1.0  CONTENTS 
  
1.0
 CONTENTS ........................................... ................................................1 
2.1 FEATURES ........................................................................................2 
2.2 TECHNICAL SPECIFICATIONS........................... ..............................3 
2.3 SAFETY NOTICE ...............................................................................4 
2.4 KEY AND PANEL DESCRIPTION...

   2          © Adam Equipment Company 2012 
2.0  INTRODUCTION  
2.1  FEATURES   
The SHS/SHSa Series are a range of heavy-duty lower  capacity crane scales  
The main features include:     ·   Easy Operation & Rugged construction 
·   15mm bright red LED display enabling a good viewing  angle. 
·   360 degree rotary safety hook and support ring desi gn 
·   Overload safety up to 150% of model capacity 
·   Selectable weighing units include kg, Lbs and Newto ns (Newtons not 
available for “a” models) 
·...

   3          © Adam Equipment Company 2012 
2.2 TECHNICAL SPECIFICATIONS 
   
Model No  Capacity  Division  Model No  Capacity  Divisi on 
SHS 50 50kg  0.01kg SHS 100a 100lb/50kg  0.02lb/0.01kg 
SHS 150 150kg  0.02kg SHS 300a 300lb/150kg  0.05lb/0.02kg 
SHS 300 300kg  0.05kg SHS 600a 600lb/300kg  0.1lb/0.05kg 
    
   

   4          © Adam Equipment Company 2012 
2.3  SAFETY NOTICE 
  
The limit stated below is the Ultimate Overload Lim its of the scales. 
Adam  Equipment  Co.  Ltd.  Its  directors,  owners  and  a ffiliated  companies  and 
organisations cannot be held liable for any resulti ng damage or injury sustained as a 
result  of  the  machines  being  used  in  excess  of  thei r  stated  capacities  or  ultimate 
overload limits.      
Model No.  SHS 50/SHS 100a  SHS 150/SHS 300a  SHS 300/ SHS 600a 
Max...

   5          © Adam Equipment Company 2012 
2.4  KEY AND PANEL DESCRIPTION  
 
 
[ON/OFF] The  power  switch  is  located  on  the  rear  housing.  Us e  this  key  to 
turn the scale ON and OFF. 
[Zero] Press the [Zero] key to return the reading to zero.  
[Unit] 
Press  the  [Unit]  key  to  change the  weighing  unit  being displayed 
between  Kg,  Lbs  and  Newtons  (Newtons  not  available  for  “a” 
models) 
[Hold] 
Use  this  key  to  activate  standard  Hold.  When  pressed  the  Hold 
LED will...

   6          © Adam Equipment Company 2012 
2.5  DISPLAY INDICATIONS WITH LED 
Kg lb N Weighing unit Indicator 
 Low battery Indicator 
Hold Hold Indicator 
Stab Stable  Indicator 
3.0  OPERATION 
3.1  SAFETY INSTRUCTIONS 
Read this manual carefully before you operate the S HS Crane Scale. 
·   Unpack the Crane Scale carefully from the packaging .  
·   Attach it to your hoist or equivalent existing equi pment securely at the 
ground level to the support ring in the upright pos ition. Make sure that...

   7          © Adam Equipment Company 2012 
Overload Warning 
Please  do  not  add  any  item  that  exceeds  the  maximum   capacity  of  the  scale. 
When  the  display  shows  ”- - - - - ”  remove  the  item  to  avoid  damage  to  the  load 
cell and scale. 
 
3.2  BATTERY OPERATION 
 
·  The  lithium  battery  will  operate  continuously  for  2 0  hours  before 
requiring  recharging.  The  scale  will  alert  you  that   the  battery  is  low  on 
charge when the Indicator LED above the battery...

   8          © Adam Equipment Company 2012 
3.3 BASIC OPERATIONS 
Power on and off
  
Press  the  [ON/OFF]  button  to  turn  the  scale  on  or  off.  The  display  on  the  scale 
will show the model capacity then countdown from 9  to 0 before displaying zero 
weight.   
Zero the scale
 
Press the  [Zero] key  so that the display shows zero. 
  
Change the weighing Unit
 
Press the  [Unit] key to change the weighing unit 
  
Standard Hold (setting 1)
 
When  the  reading  may  not  be  perfectly...

   9          © Adam Equipment Company 2012 
 
3.4  REMOTE
 CONTROL UNIT 
 
The  remote  control  works  via  infra  red  and  can  be  u sed  to  operate  the  SHS  from 
long distances. It operates using 2 x AAA batteries  and these can be exchanged by 
unclipping a cover on the rear of the remote contro l unit. 
3.5  USER
 PARAMETERS 
Four  USER  settable  parameters  are  available  on  the  SHS,  to  access  these  power 
up  the  scale  and  whilst  the  display  is  counting  dow n  press  and...