Home > Addonics Technologies > Raid Tower > Addonics Technologies 1U RAID Rack R1R2ES User Manual

Addonics Technologies 1U RAID Rack R1R2ES User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies 1U RAID Rack R1R2ES User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							www.addonics.com
    Technical Support
    If you need any assistance to get your unit functioning properly, please have your 
    product information ready and contact Addonics Technical Support at:
    Hours: 8:30 am - 6:00 pm PST
    Phone: 408-453-6212
    Email: http://www.addonics.com/support/query/
    v6.1.11
    T E C H N O L O G I E S
    User Guide
    1U RAID Rack with rack mounted PM
    (R1R2ES)         
    						
    							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
    Unpacking and Overview
    WARNING: Please remember to
    set the power supply to your local
    outlet voltage prior to plugging in
    the power cord. Failure to do so
    may damage the power supply.
    Power 
    Switch
    AC InputAC Input
    Switch Host
    e S ATA
    Drive 
    e S ATA
    Power Cord 
    (US Version Shown) 100 cm eSATA cable (2)
    Power Button
    DriveEject
    Levers
    Drive
    Activity LED 
    						
    							www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST)    Phone: 408-453-6212  Email: www.addonics.com/support/query/
    Port Multiplier Compatibility
    When configured as a set of individual drives and connected to a SATA or an 
    eSATA host adapter, the Port Multiplier will only work with a Port Multiplier aware 
    host. Identify your host controller and check with its hardware manufact\
    urer if 
    you are unsure. Addonics offers several Port Multiplier aware host adapters.
    Installation
    1. Use the provided key to unlock the front door if needed and open it.
    2. Insert a drive into each bay as desired, SATA connectors first, label side up as 
    shown, then press the drive firmly into place.
    3. Connect the Host eSATA cable to a computer. If desired, connect an external 
    eSATA drive to the Drive eSATA connector.
    4. Make sure the AC input switch is set correctly, then connect the power cord to 
    an AC  outlet.
    5. Set the AC power switch on the rear to ON, then press the power button 
    behind the front door to turn on the unit.
    To remove a drive, pull the Eject Lever until the drive disengages from t\
    he 
    internal connector then pull the drive out.
    Hot Swapping drives
    The R1R2ES unit supports hot swapping (inserting or removing drives whi\
    le the 
    drives are running and connected to a computer). The eSATA controller on the 
    computer must also support hot swapping - be sure to confirm this before\
     
    attempting to insert or remove drives while the system is running. Also be sure to 
    practice the appropriate safe 
    removal procedure before 
    proceeding. Failure to practice 
    safe removal procedures will 
    result in loss or corruption of data. 
    						
    							www.addonics.com
    Phone:   408-573-8580
    Fax:     408-573-8588
    Email:   http://www.addonics.com/sales/query/
    CONTACT US 
    						
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies 1U RAID Rack R1R2ES User Manual