Home > Addonics Technologies > Raid Tower > Addonics Technologies Cipher RAID Tower Drive Level Encryption DLE CDC5HXAES User Manual

Addonics Technologies Cipher RAID Tower Drive Level Encryption DLE CDC5HXAES User Manual

Add to Favourites
    Download as PDF

    View the Addonics Technologies Cipher RAID Tower Drive Level Encryption DLE CDC5HXAES User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 ADDONICS TECHNOLOGIES Model: CDC5HXAES IMPORTANT There is no back door for the Cipher tower encrypted hard drives if the Cipher keys are lost or stolen. Cipher key Check to make sure you have the correct version of the Cipher key. A sample key is shown Black label AES-256 stands for Cipher 256-bit key. To ensure there is a spare key, your Cipher tower comes with 5 pairs of Cipher keys. These cipher keys have all identical encryption code unless you requested then to be coded differently....
    Page 2 ADDONICS TECHNOLOGIES Model: CDC5HXAES J4 – RAID Setting Jumper Block BZS – Error buzzer function SET – RAID mode setting EZ – Automatic rebuilding to spare drive M2 – RAID mode 2 M1 – RAID mode 1 M0 – RAID mode 0 Default factory RAID jumper setting 1. Error buzzer function is DISABLED (BZS) 2. RAID mode setting modification is DISABLED (SET) 3. Auto-rebuilding to spare drive is ENABLED (EZ) 4. Individual drive mode is ENABLED (M0~M2) Note: When the default factory RAID...
    Page 3 ADDONICS TECHNOLOGIES Model: CDC5HXAES All settings on the diagram shows  RAID mode setting modification is ENAABLED (SET)  Error buzzer function is DISABLED (BZS) 7. Power on the Cipher Tower. 8. Verify if the RAID array is detected by the system a. If the 5-port HPM-XA is connected to the motherboard onboard SATA, on the CMOS setup utility, the raid array will display as “Addonics H/W RAID5” if setup as a RAID5 array. b. If the 5-port HPM-XA is connected to an eSATA host...
    Page 4 ADDONICS TECHNOLOGIES Model: CDC5HXAES III. How to operate the Cipher tower after initial setup 1. Insert the 5 AES 256-bit cipher keys into each cipher keyhole on the Diamond Cipher enclosures located at the front of the Cipher tower. 2. Push the power switch of the Cipher tower to turn it on. Observed that the green Cipher power LEDs at the front of the Cipher tower are on. If they did not, reinsert the cipher keys and re-power the Cipher tower. 3. Use the system’s File Explorer to access the...
    Start reading Addonics Technologies Cipher RAID Tower Drive Level Encryption DLE CDC5HXAES User Manual

    Related Manuals for Addonics Technologies Cipher RAID Tower Drive Level Encryption DLE CDC5HXAES User Manual

    All Addonics Technologies manuals