Home > Addonics Technologies > Converter/Adapter > Addonics Technologies I O Converter AAESP12SPCI user guide

Addonics Technologies I O Converter AAESP12SPCI user guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies I O Converter AAESP12SPCI user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Installation:
1.  Mount the Hybrid Port converter on a 3.5” drive bay.
2.  To provide power, connect a 4-pin floppy power cable from the power  
  supply to the 4-pin floppy power connector on the converter.
3.  Using a SATA data cable, connect one end to an onboard or add-in SATA  
  controller card to the SATA port of the Hybrid Port converter.
Note: For the Hybrid Port converter to support hot swapping, it needs to be 
connected to an onboard or add-in SATA controller card that supports hot 
swapping.
4.  Connect one end of the USB 5-pin header cable to the motherboard and  
  the other end to the Hybrid Port converter.
T E C H N O L O G I E S
User Guide
12V Hybrid Port Converter
(AAESP1235MK)
(AAESP12SPCI)
5VeSATAp
Hybrid eSATA
12V
4-pin Floppy 
Power Connector
SATA Port
eSATAp Port USB 5-pin Header
AAESP1235MK
Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
    Add page 2 to Favourites
    image text
    Enable zoom 
    							Installation:
1.  Mount the Hybrid Port converter on a SCSI1 or PCI.
For mounting the Hybrid Port converter on a PCI, screw the provided PCI \
bracket 
to the SCSI1 bracket. 
2.  To provide power, connect a 4-pin floppy power cable from the power  
  supply to the 4-pin floppy power connector on the converter.
3.  Using a SATA data cable, connect one end to an onboard or add-in SATA  
  controller card to the SATA port of the Hybrid Port converter.
Note: For the Hybrid Port converter to support hot swapping, it needs to be 
connected to an onboard or add-in SATA controller card that supports hot 
swapping.
4.  Connect one end of the USB 5-pin header cable to the motherboard and  
  the other end to the Hybrid Port converter.
eSATAp
Hybrid eSATA
eSATAp
Hybrid eSATA
PCI Bracket
4-pin Floppy 
Power Connector
SATA Port
eSATAp Port
Power LED USB 5-pin Header
AAESP12SPCI
5V
12V
5V
12V
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies I O Converter AAESP12SPCI user guide