ADS XiLog User Manual August 2011 QR 775026 A0

ADS XiLog+ System  User Manual 
 45 
  Merge multiple days   Choose this option to import data for 
several days,  and then designate the start and e nd dates representing 
the date range for which to import the data usi ng the Start Date and 
End Date  calendar controls.   
Note:  The calendar controls only allow the selection of dates for 
which data is available.  When  multiple days are selected, the system 
will average the data for each time period  for every day in the range.  
For example, to...

ADS XiLog+ System User Manual 
 46 
 
Disabling a value on the graph 
Enable the alarms for this profile period again by deselecting the Disable 
Selected Profile checkbox.  
After e ntering the required profile , select the deadband and debounce delay  
(when necessary) .  The d eadband around the profile can represent either a 
single value or a percentage.   When it represents a percentage, the value 
entered for the deadband corresponds to the percentage of the profile value.  
The system will...

ADS XiLog+ System  User Manual 
 47 
 
Using the Autofit option for Envelope alarms  
This provides the flexibility to change the values used to generate the high and 
low alarms for  each period independently .  Select, change, move, and disable 
s pecific values using the same methods  applied for standard profiles . 
  

ADS XiLog+ System User Manual 
 48 
Remote Data Reporting  
 
Remote Data Reporting window  
This window  includes the parameters for setting up remote delivery  of data 
fro m the XiLog+  to the designated host system (s ). 
Message Type  
This drop-down list contains the options for selecting the delivery method 
( SMS  or FTP using GPRS technology) through whi ch the XiLog+ will send 
data.   
Selecting SMS  sends reports to as many as 3 host numbers (when applicable).  
Selecting FTP transfers data...

ADS XiLog+ System  User Manual 
 49 
Ignore Daylight Savings  
Selecting this checkbox prevents the clock in the XiLog+ from compensating 
for daylight savings time. 
Host and Alarm Numbers  
When performing remote data reporting via  SMS, the XiLog+ transmits the 
data to all the host numbers  designated in the Contact Details  section.  A host 
number corresponds to a GSM modem connected to a computer.  T he 
Primayer Data Manager  utility running within Windows  serves as the 
conduit through which...

ADS XiLog+ System User Manual 
 50 
FTP Password 
This field represents the password for logging onto the FTP server.  Enter the  
appropriate  password for th e user . 
Test Login Details  
Clicking on this button verifies the FTP server  address, username, and 
password by attempting to call and log into the server.  PrimeWorks  will 
provide notification of success or failure.  A failure may indicate the wrong 
server ad dress or login information. 
Combine Flow and Pressure  
When using a 2i or 3i...

ADS XiLog+ System  User Manual 
 51 
  Data Transmission at Other Intervals 
Programming the logger to perform data transmission u sing a different regime  
requires selecting or setting several pa rameters: 
1.  Select the interval at which to send the data from the Transmission 
Frequency  drop-down list. 
2.  Designate the period of time within which the logger should conduct 
data transmission in the S tart and E nd fields.  Choosing a frequency 
of 12 or 24 hou rs only requires designating the time...

ADS XiLog+ System User Manual 
 52 
 
Optional Receive Frequency Window  
 Standby Window  
This window exists for applications  where the XiLog+ will provide constant  
power to the modem  so that it is available to accommodate instant aneous 
requests  for data.  
 
Standby Window  
  

ADS XiLog+ System  User Manual 
 53 
C H A P T E R  4  
Battery Replacement  
1. Carefully unscrew the yellow cover of the XiLog+ counter -clockwise 
1/8 of a turn and lift it off  the housing. 
2.  Carefully lift out  the antenna and circuit board from the housing . 
 
3. Disconnect or unplug the battery  from the board. 
4.  Remove the screws securing the battery holder  to the housing.  

ADS XiLog+ System User Manual 
 54 
 
5. Remove the battery holder  from the housing. 
 
6. Remove the battery from the holder.