ADS XiLog User Manual August 2011 QR 775026 A0

ADS XiLog+ System  User Manual 
 5 
 Appl ications  
 Flow monitor ing  
  leakage control (water loss reduction)  
  demand management  
  domestic  and industrial use  
  Hy draulic network modeling  
  Pressure mo nitoring 
  PRV (pressure reducing valve)  performance monitoring 
  Reservoir and bore -hole depth measuremen t 
   River level  measurement  
  Depth -to -flow conversion 
   Rainfall  measurement  
  Overflow detection   

ADS XiLog+ System User Manual  
    6 
 PrimeWorks  Software 
Use the PrimeWorks® software to configure the XiLog+ and manage the data 
collected from the unit.  The management capabi lities include reporting and 
grap hing func tions. 
Note:  Do not run other applications on the  PC or laptop computer 
during the PrimeWorks software installation process . 
Software Requirements  
ADS requires the following software  for proper operation of the PrimeWorks  
software:  
 Mi crosoft® Windows® XP or later...

ADS XiLog+ System  User Manual 
 7 
SIM Card  
To perform wireless communication via GSM, the XiLog+ m ust be equipped 
with a SIM card similar to the card  used in a cellular phone .  SIM cards are 
available through a local service provider.  However, please contact ADS 
before ordering a SIM card .  Technologies and business practices vary among 
provider s; therefore, some provider’s services may not  be compatible with the 
XiLog+ s ystem.   
In addition, t he service provider must know the options...

ADS XiLog+ System User Manual  
    8 
 R emov ing  the SIM H older from the XiLog+  
1.  Loosen the 4 screws securing the cover plate in position. 
 
2. Remove the cover plate.  
 
3. Push on the SIM  release button.  This should cause the SIM holder to 
protrude slightly from the slot . 
4.  Remove the SIM holder from the log ger.  

ADS XiLog+ System  User Manual 
 9 
  Removing the SIM Card from the SIM Holder ( applies only to replacement) 
1.  Without touching the contacts on the SIM card, gently push an object 
through the hole in the SIM holder. 
2.  Remove the SIM card.  
  Insert ing a SIM Card into the SIM Holder  
Without touc hing the SIM card contacts, insert the SIM card into the SIM 
holder, aligning the beveled edge of the card with the keyed corner of the SIM 
holder and facing the gold contacts on the card outward....

ADS XiLog+ System User Manual  
    10 
 Technical Support  
ADS provides comprehensive technical support to assist customers in the 
configuration and operation of the XiLog+.   Please contact ADS Client 
Services by email at 
[email protected] or by phone at (877) 
237- 9585 for assistance, when necessary.  

ADS XiLog+ System  User Manual 
 11 
ADS No -Hassle Warranty and Return Policy  
The following sections detail the hassle-free warranty and return policy for the 
ADS XiLog+ . 
New Product Warranty  
ADS will repair or replace any XiLog+  equipment (supplied by ADS) that is 
defective in materials and/or workmanship for up to two (2) years following 
the date of shipment from ADS.  To make a warranty claim, the customer 
should simply call ADS at (256) 430- 3366 or contact ADS Client Services 
toll- free...

ADS XiLog+ System User Manual  
    12 
Product Returns 
If the customer is not satisfied with the performance of the XiLog+ system , the 
customer may return the equipment within 30 days for a full ref und, provided 
the condition of the equipment is in the same condition as sold, except for 
expected or normal wear and tear for the period of use. 
  

ADS XiLog+ System  User Manual 
 13 
C H A P T E R  2  
Deploying  the XiLog+  
 
Deploying an ADS XiLog+ logger typical ly involves the involves the 
following steps:  
1.  Program ming the XiLog+  
2.  Perform ing a Signal Strength Test  
3.  Installing the XiLog+ at the Location  
Deploy XiLog+ data loggers in a similar manner to other  comparable units. 
However, consider the following factors concerning GSM capabilities and 
requirements during deployment:  
•  Mount  the logger in an upright...

ADS XiLog+ System User Manual  
    14 
Programming the XiLog+  
Configure the XiLog+ using the PrimeWorks  software.  Refer to 
Programming the Logger Using PrimeWorks  on page 21 for more information 
and instructions . 
Note:  The logger also may be programmed using the XiLog+ 
FastTrack  software.  Refer to  Appendix A:  XiLog+ FastTrack  
Software on page 62 for brief instructions on programming a logger 
using this simple application.  
Configuring the GPRS Network Settings ( when applicable)...