ADT Security Services NV412AADT Video Encoder Installation Guide

							NV412A-ADT Video Encoder Installation Guide 
 
Appendix A:  Specifications  
Model NV412A-ADT  
Dimensions  
H x W x D 
3.5” x 1.2” x 5.5”  
90mm x 30mm x 14 0mm 
Operating Temperature  32°F to 1 04°F  ( 0 °C to 4 0°C ) 
Storage Temperature  14°F to 140° F (-10° C to 60 ° C ) 
Video Compression  H.264, MPEG4 and MJPEG  
Network Interface 1 Ethernet 10/100BaseT (RJ45)  
LEDs 3 
Power Adapter  External Power Adapter:  12V /  1A  
External PoE: 48V / 0.3A  
 
   
ADT Pulse® Interactive Solutions 9 
  
						

							NV412A-ADT Video Encoder Installation Guide 
 
Appendix B:  Regulatory  Approvals  
 
FCC Statement   
This equipment generates uses and can radiate radio frequency energy and, if 
not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to 
correct the interfer ence by one of the following measures:  
•   Reorient or relocate the receiving antenna.  
•   Increase the separation between the equipment and receiver.  
•   Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.  
•   Consult  the dealer or an experienced radio/TV technician for help.  
To assure continued compliance, any changes or modifications not expressly 
approved by the party responsible for compliance could void the user's authority 
to operate this equipment. (Example -  use only shielded interface cables when 
connecting to computer or peripheral devices).  
FCC Radiation Exposure Statement  
This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated 
with a minimum distance of 20 centimeters between the radiator and your body.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:   
(1) This device may not cause harmful interferen ce, and  
(2)  This device must accept any interference received, including interference 
that may cause undesired operation.  
This transmitter must not be co -located or operating in conjunction with any 
other antenna or transmitter.  
 
 
 
CE Approvals   
The NV412 A-ADT  Video Encoder  and the Ethernet Video Encoder  meet the 
guidelines of the European Union and comply with the 99/5/EEC and RTTE 
99/5EG directives, including the following standards:  
•   EN60950   
•   EN300 328-2  
•   EN301 489-1  
•   EN301 489-17  
This is a Class B product . In a domestic environment, this product may cause 
radio interference in which case the user may be required to take adequate 
measures.  
This product is UL and cUL certified and comply with UL60950 -1 Information 
Technology Equipment applicable requirement.   
 
10