ADT Security Services RC8025BADT Wireless DayNight Camera Installation Guide

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
 
7. Click the Continue  button.  
 
 
8.  Connect the wireless camera  to the Device Port of the gateway using a 
standard LAN cable . 
9.  Connect the supplied 12V power adapter to power up the wireless camera.  
 
 
10.  Once connected,  click the Continue  button . 
 
NOTE:  The Power LED will turn on briefly, and then start blinking. It will 
blink during startup which takes approximately 5 to 20 seconds. 
After startup is completed, the Power LED remain
s ON . 
 
ADT Pulse® Interactive Solutions 9 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
 
 
 
11.  Click  the Finish  button. The  installation is complete.  
 
 
12.  Disconnect the wireless camera  from the gateway and remove from power.   
13.   I nstall  the  wireless camera  in the final location.  
14. Re -apply power.  
If the camera does not connect, use of the ADT Wi -Fi extender, part # 
WN2RPADT -1ADNAS is recommended to  improve connectivity . 
For more information, refer to Physical Details  –  on pages 3  through 5.  
   
10  ADT Pulse® Interactive Solutions 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
  
Wall Mounting Instructions   
 
NOTE:  Ensure that the wireless camera 
is properly configured and added 
to the network before mounting the camera. 
 
1.  Identify the location for mounting the wireless camera.  
2. Install and drive two M4 self -taping screws (not included in the package) 
2/3 of the way into the wall. If necessary, dri ll a hole for Ethernet-cable 
wiring.  
 
 
3.   Align the two mounting holes at the bottom of the camera stand with the 
two screws, and mount the camera stand onto the wall.  
 
 
4.  Screw/attach the wireless camera  onto the camera stand. 
5. Connect one end of the Ethernet cable to the LAN port of the wireless 
camera  and the other end into an available port on your router.  
ADT Pulse® Interactive Solutions 11 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
 
6. Connect the power cable into the back of the camera and plug the adapter 
end into a power outlet.  
 
NOTE:  Use only the power adapter provided. Using a different one may 
lead to hardware damage. 
 
7. 
Adjust the  wireless camera  to a desired orientation based on the video 
image on the touch panel, and secure the camera firmly.  
 
 
 
 
12   ADT Pulse® Interactive Solutions 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
  
Ceiling Mounting Instructions   
1. Mount the  Wireless Camera.  
a.  Use  a screwdriver to tighten the screw of the stand base.  
b.   Attach the wireless camera  to the swivel connector by turning it 
clockwise.  
 
 
2.  Complete the installation . 
a.  Make sure the wireless camera  is firmly fixed on the ceiling. 
b.  Adjust the  wireless camera  to the preferred position.  
 
 
 
 
ADT Pulse®  Interactive Solutions 13 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
  
Video Motion Detection  
The motion event will be captured when a significant image changes within the 
Window of Interest. The Window of Interest is defined below.  
 
 
 
NOTE:  Video motion detection is 
susceptible to light reflection, shade 
or tree/leaves movement, etc. within the Window of Interest. 
To reduce the number of unwanted video events, please adjust 
the camera to reduce these noise factors appearing in the 
Window of Interest . 
A v ideo motion event also  can be triggered by turning on/off  a 
light.
 
 
   
14  ADT Pulse® Interactive Solutions 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
  
Enabling Motion Detection via  the ADT Security System    
1. Click the Automation s tab , and  then click the Add  Automation button.  
 
 
2.  Select a trigger for this  automation from the Trigger  drop -down list.  
3. Select  Motion  from the Event  drop -down list.  
4. Select the conditions under which you want the automation action to occur 
from  Active  drop -down list.  
5. Click  Add Actions . 
 
 
6.  From the  Delay drop -down list, select the delay option you want to use for 
this action.  
7. From the  Action drop -down list, select the action you want to take place 
when the trigger occurs.  
ADT Pulse® Interactive Solutions 15 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
 
8. Click  OK. 
 
 
9.  Click  Save.  
 
 
16   ADT Pulse® Interactive Solutions 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
 
Appendix A:  Specifications  
 
Model RC8025B-ADT Wireless Day/Night Camera  
Dimensions 
H x W x D  
3.11” x 3.11 ” x 1.14” 
79 mm x 79 mm x 29 mm 
Weight  0.22 lb ( 100 g) 
Operating Temperature  32°F to 113° F (0°C to 45 °C ) 
Storage Temperature  -4°F to 158 °F ( -20 °C to 70 °C ) 
Video Compression  H.264 Baseline, MPEG -4 SP  and MJPEG  
Network Interface  1 Ethernet 10/100BaseT (RJ45) LAN connection  
LEDs 2 LED indicators and 6 IR LEDs  
Wireless Interface  IEEE 802.11n/802.11b/802.11g compatible  
Power Adapter Input:100-240 VAC ;  Output: 12V ,1A  
 
   
ADT Pulse® Interactive Solutions 17 
  
						

							RC8025B-ADT Wireless Day/Night Camera Installation Guide 
 
Appendix B:  Regulatory Approvals   
 
FCC Statement   
This equipment generates uses and can radiate radio frequency energy and, if 
not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a  particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one of the following mea sures: 
•   Reorient or relocate the receiving antenna.  
•   Increase the separation between the equipment and receiver.  
•   Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.  
•   Consult the dealer or an experienced radio/TV technician for help.  
To assure continued compliance, any changes or modifications not expressly 
approved by the party responsible for compliance could void the user's authority 
to operate this equipment. (Example -  use only shielded interface cables when 
connecting to computer or peripheral devices).  
FCC Radiation Exposure Statement  
This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated 
with a minimum distance of 20 centimeters between the radiator and your body.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:   
(1) This device may not cause harmful interference, and  
(2)  This device must accept a ny interference received, including interference 
that may cause undesired operation.  
This transmitter must not be co -located or operating in conjunction with any 
other antenna or transmitter.  
 
 
 
CE Approvals   
The RC8025B-ADT  Wireless Day/Night Camera  meet s the guidelines of the 
European Union and compl ies with the 99/5/EEC and RTTE 99/5EG directives, 
including the following standards:  
•   EN60950  
•   EN300 328-2  
•   EN301 489-1  
•   EN301 489-17  
This is a Class B product. In a domestic environment, this product may cause 
radio interference in which case the user may be required to take adequate 
measures.  
This product is UL and cUL certified and comply with UL60950 -1 Information 
Technology Equipment applicable requirement.   
 
18