Home > AEG > Dishwasher > AEG Freestanding dishwasher F66609W0P User Manual

AEG Freestanding dishwasher F66609W0P User Manual

Here you can view all the pages of manual AEG Freestanding dishwasher F66609W0P User Manual. The AEG manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 11

7. OPTIONSDesired options must be
activated every time before
you start a programme. It is
not possible to activate or
deactivate options while a
programme is running.Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.7.1  Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions....

Page 12

When you start a programme, the
appliance can take up to 5 minutes to
recharge the resin in the water softener. It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure will be repeated periodically.8.1  The salt containerCAUTION!
Only use salt specifically designed for dishwashers.
The salt is used to recharge the resin in
the water softener and to assure good washing results in the daily use.
How to fill the salt container
1. Turn the...

Page 13

4.Add the detergent. If you use multi-
tablets, activate the option Multitab.
5. Set and start the correct programme
for the type of load and the degree
of soil.9.1  Using the detergentCAUTION!
Only use detergent specifically designed for
dishwashers.
1. Press the release button ( A) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid....

Page 14

Press simultaneously Delay and Option
until the appliance is in programme
selection mode.Cancelling the programme
Press and hold simultaneously  Delay and 
Option  until the appliance is in
programme selection mode.
Make sure that there is detergent in the detergent dispenser before you start a
new programme.
End of the programme
All buttons are inactive except for the
on/off button.
1. Press the on/off button or wait for
the Auto Off function to
automatically deactivate the
appliance. 
If you open the...

Page 15

10.3 What to do if you want to
stop using multi-tablets
Before you start to use separately
detergent, salt and rinse aid do the following procedure.
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4. When the programme is completed,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of...

Page 16

1.Turn the filter ( B) counterclockwise
and remove it.
2. Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter ( B) in the flat filter
( A ). Turn it clockwise until it locks.
CAUTION!
An incorrect position...

Page 17

11.2 Cleaning the spray arms
Do not remove the spray arms. If the
holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.11.3  External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.
11.4  Internal cleaning
• Carefully clean the appliance, including the rubber gasket of the
door, with a soft moist cloth.
• If you regularly use short duration programmes, these...

Page 18

Once you have checked the appliance,deactivate and activate the appliance. Ifthe problem occurs again, contact an
Authorised Service Centre.For alarm codes not described in the
table, contact an Authorised Service
Centre.12.1  The washing and drying results are not satisfactoryProblemPossible solutionThere are whitish streaks or
bluish layers on glasses and
dishes.• The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position.
• The quantity of detergent is too...

Page 19

marked with the symbol  with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
*
ENGLISH19  

Page 20

www.aeg.com/shop117904870-A-102014    
Start reading AEG Freestanding dishwasher F66609W0P User Manual

Related Manuals for AEG Freestanding dishwasher F66609W0P User Manual

All AEG manuals