AEG Heat pump dryer T88595IS User Manual

							ProgrammesLoad 1)Properties / Fabric markBed Linen3 kgTo dry bed linen such as: single
and double sheet, pillowcase, bed-
spread.
/   Duvets3 kgTo dry one or two duvet and pil-
lows (with feather, down or syn-
thetic fillings).
/   Extra Quick Mixed3 kgTo dry cotton and synthetic fabrics,
uses low temperature./   Time Drying9 kgWith this programme you can use
the option Time Drying and set the
programme duration.
/   
SYNTHETICSExtra Dry3,5 kgDrying level: extra dry./   Cupboard Dry 2)3,5 kgDrying level: cupboard dry./   Iron Dry3,5 kgDrying level: applicable for iron./   Silk/Lingerie1 kgTo dry silk/lingerie with warm air
and gentle movement./   ENGLISH11                         
						

							ProgrammesLoad 1)Properties / Fabric mark
Wool 
4)
1 kg
To dry the cloths made of wool . The cloths be-
come soft and cosy. We recommend to remove
the cloths immediately after the programme
end. To increase or to decrease the level of the
remaining moisture of the laundry you can use
the function Dry Plus.1)  The maximum weight refers to dry items.
2)  For test institutes only:  Standard programmes for tests are specified in the EN 61121 document. If is
necessary to correct the remaining moisture level of the laundry, adjust the programme with the Dry Plus
option. Clean the filter after each cycle .
3)  The 
 Cottons Cupboard Dry programme is the “Standard cotton programme” and it is suitable
to dry normal wet cotton laundry and it is the most efficient programme in terms of energy consumption for drying wet cotton laundry.
4)  The wool drying cycle of this tumble drying machine has been tested and approved by The  Woolmark
Company. The cycle is suitable to dry wool garments, which are labelled "hand wash" provided that the garments are washed in a  Woolmark endorsed hand washing cycle and tumble dried according to the
instructions issued by the manufacturer.  1780SW13W.
6.1 Programmes and options selection OptionsProgrammes 1)Dry PlusAnti-creaseSpun at
RPMTime Dry- ingCottons; Extra Dry Cottons;  Cupboard Dry Cottons; Iron Dry Jeans Bed Linen Duvets  Extra Quick Mixed www.aeg.com12                          
						

							 OptionsProgrammes 1)Dry PlusAnti-creaseSpun atRPMTime Dry- ingTime Drying  Synthetics; Extra Dry Synthetics; Cupboard Dry Synthetics; Iron Dry Silk/Lingerie Wool  1) Together with the programme you can set 1 or more options.7.  OPTIONS7.1  Dry Plus
This option helps to get the laundry
more dried. There are 3 possible
selections:
 - the default selection which is related
to the programme.
 - the selection to get the laundry
lightly dried.
 - the selection to get the laundry
more dried.
7.2  Anti-crease
Extends anti-crease phase (30 minutes) at
the end of the drying cycle to 90
minutes. This option prevents laundry
from creases. Laundry can be removed
during the anti-crease phase.
7.3  Spun at RPM
This option helps to set the best
condition to dry the laundry.
If you know the initial spin speed when
you washed you can use this option. Higher spin speed causes that the
laundry contains less water.
7.4  Buzzer
When the buzzer option is activated you
can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer option is by default always on. You can use this function to activateor deactivate the sound.You can activate the Buzzer
option with all programmes.7.5  Time Drying
Operates only with the Time Drying
programme. Lets the user to set special
time of drying programme from
minimum 10 min. to maximum of 2 hours
(in 10 min. steps).
7.6  Delay StartLets to delay the start of a
drying programme from
minimum of 30 minutes to
maximum of 20 hours.
1. Set the drying programme and
options.
2. Push the Delay Start button again
and again.
ENGLISH13                      
						

							the necessary time of the delay comeinto the view on the display (e.g. 
if the programme has to start after 12hours.)
3. To activate the Delay Start option,
push the Start/Pause button. The time to start decreases on the
display.8.  STEAM FUNCTIONSteam removes an odour, as the outdoor
air.
Decreases or removes creases. Makes
the pieces of clothing more flexible.
The pieces of clothing after steam
programme are easy to iron.At the start, because of wide
types of fabrics, apply small
steam loads. You easily get
the experience, which helps
you to use the sufficient
steam loads.
At the end of cycle, if you will not iron,
put the pieces of clothing on the clothes
hanger.
8.1  How to fill water container
for steam systemCAUTION!
Use only distilled or
demineralized water. Always
when the container is empty
the indicator 
 is on and
you cannot start the steam
programmes.
For the first time you can use
the water attached in the
bottle. The condensed water
is also applicable for steam
system. The condensate
water must be filtered e.g.
with a coffee filter to remove
small pieces of fluff. If you
dry with standard and steam
programmes, the water
container for steam system
fills automatically.To fill water container:
1. Turn on the appliance.
2. Set 1 of the steam programmes.
3. Pull the water container. Keep it in
horizontal position.
4. Fill the water. until you hear the
acoustic signal.
The acoustic signal sounds when the
water container for steam system is full.
5. Put the water container.
8.2  Steam
This option is to set the required steam
load. It depends on the: type, weight and
volume of the laundry.
There are 3 possible selections:
 minimum load
 moderate - the default load
 maximum load
www.aeg.com14             
						

							8.3 Steam programmesProgrammesLoad 1)PropertiesCottons3 kgTo dry and remove the creases from the cotton pieces
of clothing. Frequently it is not necessary to iron the
cloths after this cycle.Synthetics1,5 kgTo dry and remove the creases from the synthetic
pieces of clothing. Frequently it is not necessary to iron
the cloths after this cycle.
Refresh1 piece
For 1 suit or up to 2 suit jackets or pair of trousers or
similar clothes. Also applicable for removing odours. 
For dry clothes only.  The clothes become soft and co-
sy. We recommend to remove the clothes immediately
after the programme end.1)  The maximum weight refers to dry items.8.4  Steam chartProgrammes / types of
the clothesSteamLoad 1)Cottons minimum0,5 - 1 kg moderate1 - 2 kg maximum2 - 3 kgCottons / shirts minimum1 - 2 items moderate3 - 4 items maximum5 - 6 itemsSynthetics minimum0,2 - 0,5 kg moderate0,5 - 1 kg maximum1 - 1,5 kgENGLISH15          
						

							Programmes / types ofthe clothesSteamLoad 1)Synthetics / shirts minimum1 - 2 items moderate3 - 4 items maximum5 itemsRefresh / casual minimum1 - 2 items moderate3 - 4 items maximum5 - 6 itemsRefresh / business minimum1 - 2 trousers moderate1 - 2 jackets maximum1 suit1) The maximum weight refers to dry items.9.  BEFORE FIRST USEBefore you use the appliance for the first
time do these operations:
• Clean the tumble dryer drum with a moist cloth.
• Start a short programme (e.g. 30 minutes) with moist laundry.
• Fill up the steam water container before using a steam programme for
the first time (see chapter on "
Care
and cleaning - Fill up the steam water container
”).
At the beginning of drying
cycle (3-5 min.) there could
be a slightly higher sound
level. It is because of start of
the compressor that is
normal for compressor
powered appliances such:
refrigerators, freezers.10.  DAILY USE10.1  Preparing the laundry
• Close the zippers.
• Close the fasteners of the duvet covers.
• Do not keep ties or ribbons loose (e.g. apron ribbons). Tie them before
you start a programme.
• Remove all items from the pockets.• If an item has the internal layer made of cotton, turn it inside out. Make sure
that the cotton layer is always external
• We recommend that you set the correct programme applicable for the
type of fabrics that are in the
appliance.www.aeg.com16           
						

							• Do not put fabrics with strong colourstogether with fabrics with light
colours. Strong colours can bleed.
• Use an applicable programme for cotton jersey and knitwear to prevent
the items to shrink.
• Make sure that the laundry weight is not more than the maximum weight
that is in the programme table.
• Dry only the laundry that is applicable for tumble dryer. Refer to the fabriclabel on the items.Special notes about the Steam system
• The following textiles cannot be treated using a Steam programmes:
woollen knitwear, leather, textiles with
large metal, wooden or plastic parts,
textiles with rusting metal parts,
oilskins or wax cotton garments.
• To smooth or freshen laundry with a Steam programme, sort laundry by
size, weight, material and colour. Only
smooth textiles together that are
similar in terms of size, weight,
material and colour.
• Do not dry new, coloured textiles together with light-coloured laundryitems. Colours may fade (check colour
fastness of fabric when damp in an inconspicuous area).
• Do not use dry cleaning sets in combination with Steam programmes.
• Before treating garments with an Iron Aid programme, remove stains by
washing or using localised stain
removal.
• Turn items with double-layered fabrics inside out (e.g. with
cottonlined anoraks, the cotton layer
should be outermost). These fabrics will then dry better.Fabric labelDescriptionLaundry that is applicable for tumble dryer.Laundry that is applicable for tumble dryer. Set the programme with
standard temperature.Laundry that is applicable for tumble dryer. Set the programme with
low temperature.Laundry that is not applicable for tumble dryer.10.2  Loading the laundryCAUTION!
Do not lock the laundry in
between the appliance door
and rubber seal.
1. Pull the appliance door.
2. Load loosely the laundry.
3. Close the appliance door.
10.3  Turning on the appliance
To turn on the appliance:
Push the On/Off button.
If the appliance is on, some indications come in to the view on the display.
10.4  Auto Off function
To decrease the energy consumption,
the Auto Off function turns off
automatically the appliance:
• if the 
 Start/Pause button was not
pushed in the time of 5 minutes.
• after 5 minutes from the programme end.
Push the On/Off button to turn on the
appliance.
If the appliance is on, some indications come in to the view on the display.
ENGLISH17       
						

							10.5 Setting a programme
Use the programme dial to set the
programme.
The possible time to complete the programme comes into the view on the display.
The drying time you see is
related to the load of 5 kg
for cotton and jeans
programmes. For the other
programmes the drying time
is related to the
recommended loads. The
drying time of the cotton
and jeans programmes with
the load more than 5 kg is
longer.10.6  Options
Together with the programme you can
set 1 or more special options.
To activate or deactivate the option push
the applicable button .
When the option is activated the LED above the button or symbol on the
display comes into the view.
10.7  Child lock option
The child lock can be set to prevent the
children to play with the appliance. The
child lock option locks all push buttons
and the programme dial (this option
does not lock  On/Off button).
You can activate the child lock option:
• before you push the  Start/Pause
button - the appliance cannot start
• after you push the  Start/Pause button
- programmes and option selection is off.Child lock option activation:
1. Turn on the dryer.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.
4. Push at the same time and hold
down the  Dry Plus and Anti-crease
buttons .
The symbol 
 comes into the view on
the display.
5. To deactivate the child lock, push
again the above buttons until the
symbol goes out of the view.
10.8  Starting a programme
To start the programme:
Push the Start/Pause button.
The appliance starts and the LED above the button does not flash but is stable.
10.9  Programme change
To change a programme:
1. Push the On/Off button to turn off
the appliance.
2. Push again the On/Off button to turn
on the appliance.
3. Set a new programme.
10.10  Programme endClean the filter and drain the
water container after each
drying cycle. (See chapter
CARE AND CLEANING.)www.aeg.com18       
						

							If the drying cycle is completed, the
symbol 
flashes on the display. If the 
Buzzer option is on, the acoustic signal sounds intermittently for 1 minute.
If you do not turn off the
appliance, the crease guard
phase starts. Laundry can be
removed during this phase.To remove the laundry:
1. Push the On/Off button for 2
seconds to turn off the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.11.  HINTS AND TIPS11.1  Ecological hints
• Spin good the laundry before drying. • Use the load volumes which are specified in the programme chart.
• Clean the filter after each drying cycle.
• Do not use fabric softener to wash and then dry. In the tumble dryer
laundry becomes soft automatically.
• Use the condensate as distilled water, e.g. for steam ironing. If it is necessary
clean the condensate before (e.g.
with a coffee filter) to remove possible
small pieces of fluff.
• Always keep the airflow slots on the bottom of the appliance clear.
• Make sure that is good airflow in the appliance installation position.11.2  Adjustment of the
remaining laundry moisture
degree
To change the default degree of the
remaining moisture of the laundry:
1. Turn on the appliance.
2. Wait approximately 8 seconds.
3. Select 1 of available programmes.
4. Push at the same time and hold
down the  Dry Plus and Spun at RPM
buttons.
One of the symbols goes into the view on the display:
 - the maximum dry laundry
 - the more dry laundry
 - the standard dry laundry
5. Push the  Start/Pause  button again
and again until you set necessary
degree.
6. To memorise the setting, push at the
same time the  Dry Plus and Spun at
RPM  buttons for approximately 2
seconds.
11.3  Deactivating the Tank
indicator 
1. Turn on the appliance.
2. Wait approximately 8 seconds.
3. Select 1 of available programmes.
4. Push at the same time and hold
down the  Dry Plus and Buzzer
buttons.
One of 2 configurations is possible:
•the Tank indicator: 
 is on and
the symbol 
 goes into the
view - the water container
indicator is permanently  on
• the Tank indicator: 
 is off and
the symbol 
 goes into the
view - the water container
indicator is permanently  off
ENGLISH19           
						

							12. CARE AND CLEANING12.1  Cleaning the filter
At the end of each cycle the symbol 
 Filter is on the display and you must
clean the filter.
The filter collects the fluff.
The fluff occurs while the
cloths are dried in the
tumble dryer.
1. Open the door. Pull the filter.
2.Push the hook to open the filter.
3.Use a moist hand to clean each filter
part.
4. If necessary clean the filter with the
brush under warm tap water and/or a
vacuum cleaner. Close the filter.
5. If necessary remove fluff from the
filter socket and gasket. You can use a vacuum cleaner. Put the filter inside
the filter socket.
12.2  Draining the water
container
Drain the condensed water container after each drying cycle.
If the condensed water container is full,
the programme breaks off automatically.
The symbol 
 Tank is on the display
and you must drain the water container.
To drain the water container:
1. Pull the water container and keep it
in horizontal position.
www.aeg.com20