Home > AEG > Dishwasher > AEG Integrated dishwasher F55320VI0 User Manual

AEG Integrated dishwasher F55320VI0 User Manual

Here you can view all the pages of manual AEG Integrated dishwasher F55320VI0 User Manual. The AEG manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 11

7.2 TimeSaver
This option increases the pressure and the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.How to activate TimeSaver
Press  TimeSaver , the related indicator
comes on. 
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a few seconds and...

Page 12

8.2 How to fill the rinse aid
dispenserCAUTION!
Only use rinse aid
specifically designed for dishwashers.
1. Press the release button ( D) to open
the lid ( C).
2. Pour the rinse aid in the dispenser ( A)
until the liquid reaches the fill level
'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity ( B)
between position 1 (lowest
quantity)...

Page 13

1.Press the release button ( B) to open
the lid ( C).
2. Put the detergent, in powder or
tablets, in the compartment ( A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment ( D).
4. Close the lid. Make sure that the
release button locks into position.
9.2  Setting and starting a
programmeThe AUTO OFF function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation: • 5...

Page 14

automatically deactivate the
appliance.2. Close the water tap.10.  HINTS AND TIPS10.1  General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When needed, use the prewash
programme (if available) or select a
programme with a prewash phase.
• Always use the whole space of the baskets.
• When loading the appliance, make sure that...

Page 15

• Make sure that cutlery and dishes donot bond together. Mix spoons withother cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket. Make sure that the items do not
move.
• Make sure that the spray arm can move freely before you start a
programme.10.5  Before starting a
programme
Make sure that:
• The filters are clean and correctly installed.
• The cap of the salt container is tight. • The spray arms are not clogged....

Page 16

2.Remove the filter ( C) out of filter ( B). 
3. Remove the flat filter ( A).
4. Wash the filters.
5.Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter ( A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters ( B) and ( C).
8. Put back the filter (
B) in the flat filter
( A ). Turn it clockwise until it locks.CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage...

Page 17

12. TROUBLESHOOTINGIf the appliance does not start or it stops
during operation. Before you contact an
Authorised Service Centre, check if you
can solve the problem by yourself with
the help of the information in the table.With some problems, the display
shows an alarm code.Problem and alarm codePossible solutionYou cannot activate the ap-
pliance.• Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.The programme does not
start.• Make...

Page 18

ProblemPossible solutionThere are stains and dry water
drops on glasses and dishes.• The released quantity of rinse aid is not sufficient. Ad- just the rinse aid selector to a higher position.
• The quality of the rinse aid can be the cause.The dishes are wet.• The programme does not have a drying phase or has a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a different brand...

Page 19

ENGLISH19 

Page 20

www.aeg.com/shop100006990-A-492014    
Start reading AEG Integrated dishwasher F55320VI0 User Manual

Related Manuals for AEG Integrated dishwasher F55320VI0 User Manual

All AEG manuals