AEG Integrated slimline dishwasher F55412VI0 User Manual

							ENUser ManualDishwasherF55412VI0    
						

							CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 4
3.  PRODUCT DESCRIPTION.............................................................................................. 6
4.  CONTROL PANEL........................................................................................................... 7
5.  PROGRAMMES............................................................................................................... 7
6.  SETTINGS........................................................................................................................ 8
7.  OPTIONS....................................................................................................................... 11
8.  BEFORE FIRST USE....................................................................................................... 11
9.  DAILY USE......................................................................................................................12
10.  HINTS AND TIPS......................................................................................................... 14
11.  CARE AND CLEANING.............................................................................................. 15
12.  TROUBLESHOOTING.................................................................................................17
13.  TECHNICAL INFORMATION..................................................................................... 20
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it. Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.comRegister your product for better service:
www.registeraeg.comBuy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shopCUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
 Warning / Caution-Safety information
 General information and tips
 Environmental information
Subject to change without notice.
www.aeg.com2       
						

							1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always keep the instructions with the appliance for future
reference.
1.1  Children and vulnerable people safety
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,sensory or mental capabilities or lack of experienceand knowledge if they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
• Cleaning and user maintenance shall not be made by
children without supervision.
1.2  General Safety
•
This appliance is intended to be used in household
and similar applications such as: – farm houses; staff kitchen areas in shops, offices
and other working environments;
– by clients in hotels, motels, bed & breakfast and
other residential type environments.
• Do not change the specification of this appliance.
• The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar (Mpa)
• Obey the maximum number of 9 place settings.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
ENGLISH3  
						

							•Put knives and cutlery with sharp points in the cutlery
basket with the points down or in a horizontal position.
• Do not keep the appliance door open without
supervision to prevent to fall on it.
• Before maintenance, deactivate the appliance and
disconnect the mains plug from the mains socket.
• Do not use water spray and steam to clean the
appliance.
• The ventilation openings in the base (if applicable)
must not be obstructed by a carpet.
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets mustnot be reused.2.  SAFETY INSTRUCTIONS2.1  Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance where the temperature is less than 0
°C.
• Obey the installation instruction supplied with the appliance.
• Make sure that the appliance is installed below and adjacent to safe
structures.2.2  Electrical connectionWARNING!
Risk of fire and electrical
shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agreeswith the power supply. If not, contact
an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
• This appliance complies with the E.E.C. Directives.
• Only for UK and Ireland. The appliance has a 13 amp mains plug. If
it is necessary to change the fuse in
the mains plug, use fuse: 13 amp
ASTA (BS 1362).2.3  Water connection
• Make sure not to cause damage to
the water hoses.
• Before you connect the appliance to new pipes or pipes not used for a
long time, let the water flow until it is
clean.
• The first time you use the appliance, make sure that there is no leakage.
• The water inlet hose has a safety valve and a sheath with an inner mains
cable.
www.aeg.com4  
						

							WARNING!
Dangerous voltage.
• If the water inlet hose is damaged, immediately disconnect the mains
plug from the mains socket. Contact the Authorised Service Centre to
replace the water inlet hose.
2.4  Use
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous. Obey the safety
instructions on the detergent
packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the programme is
completed. There can be detergent
on the dishes.
• The appliance can release hot steam
if you open the door while a
programme operates.
• Do not put flammable products or items that are wet with flammable
products in, near or on the appliance.2.5  Service
• Contact the Authorised Service
Centre to repair the appliance. Werecommend only the use of original
spare parts.
• When you contact the Authorised Service Centre, ensure that you have
the following information that is
available on the rating plate.
Model :
PNC :
Serial Number :
2.6  DisposalWARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the
appliance.
ENGLISH5    
						

							3. PRODUCT DESCRIPTION1Upper spray arm2
Lower spray arm
3
Filters
4
Rating plate
5
Salt container
6
Air vent
7Rinse aid dispenser8
Detergent dispenser
9
Cutlery basket
10
Lower basket
11
Upper basket
3.1  Beam-on-Floor
The Beam-on-Floor is a light that shows
on the kitchen floor below the appliance
door.
• When the programme starts, a red light comes on and stays on for all theduration of the programme.
• When the programme is completed, a green light comes on.• When the appliance has amalfunction, the red light flashes.The Beam-on-Floor goes off
when the appliance is
deactivated.www.aeg.com64379 8 1056
11 
12   
						

							4. CONTROL PANEL1On/off button2
Display
3
Delay  button
4Programme buttons5
Indicators
4.1 IndicatorsIndicatorDescriptionMultitab indicator.Salt indicator. It is always off while the programme operates.Rinse aid indicator. It is always off while the programme operates.5. PROGRAMMESProgrammeDegree of soil
Type of loadProgramme phasesOptions 1)• Normal soil
• Crockery and cutlery• Prewash
• Wash 50 °C
• Rinses
• Dry• Multitab 2)• All
• Crockery, cut- lery, pots and
pans• Prewash
• Wash from 45 °C to 70 °C
• Rinses
• Dry• Multitab 3)• Heavy soil
• Crockery, cut- lery, pots and
pans• Prewash
• Wash 70 °C
• Rinses
• Dry• Multitab 4)• Fresh soil
• Crockery and cutlery• Wash 60 °C or 65 °C
• Rinses• MultitabENGLISH712435         
						

							ProgrammeDegree of soil
Type of loadProgramme phasesOptions 5)• All• Prewash 1)  With this programme you have the most efficient use of water and energy consumption for crockery
and cutlery with normal soil. (This is the standard programme for test institutes).
2)  The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3)  This programme has a high temperature rinsing phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 °C for at least 10 minutes.
4)  With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5)  With this programme you can quickly rinse dishes to prevent remains of food to bond on dishes and
odours to form in the appliance. Do not use detergent with this programme.5.1  Consumption valuesProgramme 1)Water
(l)Energy(kWh)Duration (min)9.50.7892256 - 110.5 - 1.240 - 14011 - 131.1 - 1.3140 - 16080.83040.1141)  The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.5.2  Information for test
institutes
For all the necessary information for testperformance, send an email to:[email protected]
Write down the product number (PNC)that is on the rating plate.6.  SETTINGS6.1  Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener according to the water hardness.• The activation or the deactivation of the acoustic signal for end of
programme.
• The activation or deactivation of the rinse aid dispenser when you want to
use the Multitab option without rinse
aid.
These settings will be saved until you
change them again.www.aeg.com8       
						

							How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
 is on and the display shows the
programme duration.
When you activate the appliance, usually
it is in programme selection mode.
However, if this does not happen, you
can set the programme selection mode
in the following way:
Press and hold simultaneously 
and  until the appliance is in
programme selection mode.
6.2  The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.Water hardnessGerman de-
grees (°dH)French degrees (°fH)mmol/lClarke de-greesWater softener lev- el47 - 5084 - 908.4 - 9.058 - 631043 - 4676 - 837.6 - 8.353 - 57937 - 4265 - 756.5 - 7.546 - 52829 - 3651 - 645.1 - 6.436 - 45723 - 2840 - 504.0 - 5.028 - 35619 - 2233 - 393.3 - 3.923 - 275 1)15 - 1826 - 322.6 - 3.218 - 22411 - 1419 - 251.9 - 2.513 - 1734 - 107 - 180.7 - 1.85 - 122
						

							 and  start to flash
and the display is blank.
2. Press 
.
• The indicators 
 and
 go off.
• The indicator 
 continues to
flash.
• The display shows the current
setting: e.g. 
 = level 5.
3. Press 
 again and again to change
the setting.
4. Press the on/off button to confirm
the setting.
6.3  The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
Use of rinse aid and multi-
tablets
When you activate the option Multitab,
the rinse aid dispenser continues to
release rinse aid. However you can
deactivate the rinse aid dispenser. In this
case the drying results may not be
satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse
aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously 
 and
 until the indicators ,
 and  start to flash
and the display is blank.
2. Press 
 .
• The indicators 
 and go off.
• The indicator 
 continues to
flash.
• The display shows the current
setting.
–
 = rinse aid dispenser
activated.
–
 = rinse aid dispenser
deactivated.
3. Press 
 to change the setting.
4. Press the on/off button to confirm
the setting.
6.4  Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme selection mode.
1. To enter the user mode, press and
hold simultaneously 
 and
 until the indicators ,
 and  start to flash
and the display is blank.
2. Press 
 .
• The indicators 
 and  go
off.
• The indicator 
continues to flash.
• The display shows the current setting:
–
 = Acoustic signal off.
–
 = Acoustic signal on.
3. Press 
 to change the
setting.
4. Press the on/off button to confirm
the setting.
www.aeg.com10