AEG L 71060 Sl User Manual

L 71060 SL
L 71260 SLWASHING MACHINE USER MANUAL
 

 
SERVICE
When contacting Service, ensure that
you have the following data available.
The information can be found on the
rating plate.
Model
PNC
Serial Number
The following symbols are used in this
user manual:
Warning - Important Safety information.
General information and tips
Environmental information
Subject to change without notice
CONTENTS
4 SAFETY INFORMATION
6 ENVIRONMENT CONCERNS
6 TECHNICAL INFORMATION
7 PRODUCT DESCRIPTION
7 ACCESSORIES
8 CONTROL PANEL
12 PROGRAMMES
15 BEFORE FIRST USE
15...

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed...

 SAFETY INFORMATION
Before the installation and use, read
this manual carefully:
• For your safety and the safety of your
property
• To help the environment
• For the correct operation of the ap-
pliance.
Always keep these instructions with the
appliance also if you move or give it to
a different person.
The manufacturer is not responsible if
an incorrect installation and use causes
damage.
CHILDREN AND VULNERABLE
PERSON SAFETY
• Do not let persons, children inclu-
ded, with reduced physical sensory,...

air circulation between the appliance
and the carpet. Adjust the feet to
have the necessary space between
the appliance and the carpet.
Water connection
• Do not connect the appliance with
old hoses already used. Only use new
hoses.
• Make sure not to cause damage to
the water hoses.
• Do not connect the appliance to new
pipes or pipes not used for a long
time. Let the water flow for some mi-
nutes, then connect the inlet hose.
• The first time you use the appliance,
make sure that the water hoses and...

 ENVIRONMENT CONCERNS
PACKAGING MATERIALS
Recycle the materials with the symbol
 .
Put the packaging in applicable con-
tainers to recycle it.
ECOLOGICAL HINTS
To help the environment, use less water
and energy, obey these instructions:
• Set a programme without the pre-
wash phase to wash laundry with nor-
mal soil.
• Always start a washing programme
with the maximum load of laundry.
• If necessary, use a stain remover
when you set a programme with a
low temperature.
• To use the correct quantity of the...

PRODUCT DESCRIPTION
5
6
712
4
123
11
10
89
1Worktop
2Detergent dispenser
3Control panel
4Door handle
5Rating plate
6Drain pump
7Feet for the appliance level
8Water drain hose
9Water inlet valve
10Mains cable
11Transit bolts
12Feet for the appliance level
ACCESSORIES
12
34
1Spanner
To remove the transit bolts.
2Plastic caps
To close the holes on the rear side
of the cabinet after the removal of
the transit bolts.
3Anti-flood inlet hose
To prevent possible leakage
4Plastic hose guide
To connect the drain...

CONTROL PANEL
123
45678910
1On/Off button
2Programme knob 
3Display 
4Start Pause button
5Delay start button
6Time save button
7Extra rinse button
8Stain button
9Spin reduction button
10Temperature button
ON OFF BUTTON 1
Press this button to activate or deacti-
vate the appliance. A tune sounds when
the appliance is activated.
The AUTO Stand-by function automati-
cally deactivates the appliance to de-
crease the energy consumption when:
• You do not use the appliance for 5
minutes before you press button...

DISPLAY 3
ABCD
The display shows:
A• The maximum temperature of the programme.
B• The default spin speed of the programme.
•
'No Spin'
1) and 'Rinse Hold' symbols.
C•
The display symbols.2)
SymbolsDescription
Washing phase
Rinse phases
Spin phase
Child lock
You cannot open the appliance door when the symbol is on.
You cannot open the appliance door when the symbol flash-
es. Wait for some minutes before you open the door.
You can open the door only when the symbol goes off.
If the...

D• The programme time
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay start
time.
•Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
•Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the...