AEG L 71060 Sl User Manual

Spin phase is off.
'Rinse Hold' function is
on.
TEMPERATURE BUTTON 10
Press button 
10 to change the default
temperature.
- -= cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button 
8 and button 7
at the same time for 6 seconds.
If you deactivate the acoustic
signals,...

PROGRAMMES
Programme
TemperatureType of load
max. weight of loadCycle
descriptionFunctions
Cottons
95° - Cold
White and coloured
cotton with normal
soil.
max. 6 kgWash
Rinses
Long spinSPIN REDUCTION
RINSE HOLD
STAIN
1)
EXTRA RINSE
TIME SAVE2)
 Cottons + Pre-
wash
95° - Cold
White and coloured
cotton with heavy soil.
max. 6 kgPrewash
Wash
Rinses
Long spinSPIN REDUCTION
RINSE HOLD
EXTRA RINSE
TIME SAVE
2)
Extra Silent
95° - Cold
White and coloured
cotton with normal
soil.
max. 6 kgWash
Rinses
Stop with...

Programme
TemperatureType of load
max. weight of loadCycle
descriptionFunctions
Rinse
All fabrics.One rinse with ad-
ditive spin phaseSPIN REDUCTION
RINSE HOLD
EXTRA RINSE
5)
Curtains
40° - Cold
Set this programme
to wash curtains. It
adds automatically
the prewash phase to
clean the dust from
the curtains.
Do not put the deter-
gent into the prewash
compartment.
max. 2 kgPrewash
Wash
Rinses
Short spinSPIN REDUCTION
RINSE HOLD
EXTRA RINSE
Jeans6)
60° - Cold
All items in jeans. Jer-
sey made items with...

8) 
Set this programme to have a good washing results and decrease the energy consumption.
The time of the washing programme is extended. For cotton economy programmes you
can set only the Extra Quick duration.
CONSUMPTION VALUES
Programme1)Energy consumption
(KWh)2)Water consump-
tion (litre)2)
White Cottons 95 °C2.160
Cottons 60 °C1.056
Cottons 40 °C0.7556
Synthetics 40 °C0.4745
Delicates 40 °C0.6562
Wool/ Handwash 30 °C0.2555
1) 
Refer to the display for the programme time.
2) 
The consumption...

BEFORE FIRST USE
1.To activate the drain system, put 2
litre of water in the main wash com-
partment of the detergent dispens-
er.
2.Put a small quantity of detergent in
the main wash compartment of thedetergent dispenser. Set and start
a programme for cotton at the
highest temperature without laun-
dry. This removes all possible dirt
from the drum and the tub.
USING THE APPLIANCE
1.Open the water tap.
2.Connect the mains plug to the
mains socket.
3.Press button 1 to activate the ap-
pliance.
4.Put the...

FILLING THE DETERGENT AND ADDITIVES
The detergent compartment for the prewash phase, the soak pro-
gramme and for the stain function.
Add the detergent for prewash, soak and stain remover before
the start of the programme.
The detergent compartment for the washing phase.
If you use a liquid detergent, put it immediately before you start
the programme.
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the pro-
gramme.
This is the maximum level...

3.To use powder detergent, turn the
flap up.
4.To use liquid detergent, turn the
flap down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash
phase.
– Do not set the delay start
function.
5.Measure out the detergent and the
fabric conditioner.
6.Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer. 
SETTING...

CHANGE A FUNCTION
You can change only some functions
before they operate.
1.Press button 4 . The indicator
flashes.
2.Change the function set.
SET THE DELAY START
1.Press button 5 again and again
until the display shows the number
of minutes or hours. The related
symbols comes on.
2.Press button 4 , the appliance
starts the countdown of the delay
start.
When the countdown is comple-
ted, the programme starts auto-
matically.
Before you press button 4 to
start the appliance, you can can-
cel or change the...

To drain the water:
1.If necessary, decrease the spin
speed.
2.Press the Start/Pause button 4 .
The appliance drain the water and
spin.
3.When the programme is comple-
ted and the door lock symbol goes
off, you can open the door
4.Deactivate the appliance.
The appliance drain and spin
automatically after approximate-
ly 18 hours.
ENGLISH19
 

HINTS AND TIPS
THE LAUNDRY LOAD
• Divide the laundry in: white, col-
oured, synthetics, delicates and wool.
• Obey the washing instructions that
are on the laundry care labels.
• Do not wash together white and col-
oured items.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered fabrics,
wool...