AEG Oven BP861511KM User Manual

6.2 The menus in overview
Main menuSym-
bolMenu itemApplicationHeating FunctionsContains a list of heating functions.Assisted CookingContains a list of automatic programmes.PyrolysisPyrolytic cleaning.Basic SettingsUsed to set other settings.FavouritesContains a list of favourite cooking programmes
created by the user.
Submenu for: Basic Settings
Sym-
bolSubmenuDescriptionSet Time of DaySets the current time on the clock.Time IndicationWhen ON, the display shows the current time
when you deactivate the...

Sym-
bolSubmenuDescriptionCleaning ReminderReminds you when to clean the appliance.DEMO modeActivation / deactivation code: 2468ServiceShows the software version and configuration.Factory SettingsResets all settings to factory settings.6.3  Heating FunctionsHeating functionApplicationTrue Fan CookingTo bake on up to three shelf positions at the same
time and to dry food. Set the temperature 20 - 40
°C lower than for the function: Conventional
Cooking.Pizza SettingTo bake food on one shelf position for a...

Heating functionApplicationBottom HeatTo bake cakes with crispy bottom and to preserve
food.Moist Fan BakingTo prepare baked goods in tin on one shelf posi-
tion. To save energy during cooking. This function
must be used in accordance with the cooking ta-
bles in order to achieve the desired cooking re-
sult. To get more information about the recom-
mended settings, refer to the cooking tables. This
function was used to define the energy efficiency
class acc. to EN 60350-1.Dough ProvingFor controlled...

Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold  for 3
seconds. The heat-up indicator
alternates.
6.7  Residual heat
When you deactivate the appliance, the display shows the residual heat. You can
use the heat to keep the food warm.7.  CLOCK FUNCTIONS7.1  Clock functions tableClock functionApplicationMinute MinderTo set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the...

4.Press  to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press any symbol to stop the signal.7.3  Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1. Activate the...

Dishes with the function:
Food Sensor AutomaticLoin of PorkRoast BeefScandinavian BeefLoin of GameLamb Joint, mediumBoned PoultryWhole Fish8.2  Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press
 to confirm.
4. Select a recipe. Press 
 to confirm.
When you use the function:
Manual, the appliance...

3.Put the plug of the core temperature
sensor into the socket at the top of the cavity.
The display shows the core temperature
sensor symbol.
4. Press 
 or  in less than 5
seconds to set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The appliance calculates an approximate end time. The end time is different for
the different quantities of the food, the
set oven temperatures (minimum 120 °C)
and the operating modes. The appliance calculates the end time in...

9.3 Telescopic RunnersKeep the installation
instructions for the
telescopic runners for future
use.
With telescopic runners you can put in
and remove the shelves more easily.
CAUTION!
Do not clean the telescopic
runners in the dishwasher.
Do not lubricate the
telescopic runners.
1. Pull out the right and left hand
telescopic runners.
2. Put the wire shelf on the telescopic
runners and carefully push them into
the appliance.
Make sure you push back the telescopic runners fully in the appliance before you...

10. ADDITIONAL FUNCTIONS10.1  Favourites
You can save your favourite settings,
such as duration, temperature or heating function. They are available in the menu:
Favourites. You can save 20
programmes.Saving a programme
1. Activate the appliance.
2. Set a heating function or an
automatic programme.
3. Touch 
 again and again until the
display shows: SAVE.
4. Press 
 to confirm.
The display shows the first free memory
position.
5. Press 
 to confirm.
6. Enter the name of the programme.
The first letter...

3.Press  again and again until the
display shows: Duration.
4. Set the time.
5. Press 
 again and again until the
display shows: Set + Go.
6. Press 
 to confirm.
Press any symbol (except for 
) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when the heating function
operates.
• The menu: Basic Settings lets you activate and
deactivate the function:
Set + Go.10.5  Automatic Switch-off
For safety reasons the...