AEM Engine Position Module 303250 User Manual
Here you can view all the pages of manual AEM Engine Position Module 303250 User Manual. The AEM manuals for Engine Position Modules are available online for free. You can easily download all the documents as PDF.
Page 1
WARNING: ! This installation is not for the electronic novice or the PC illiterate! Use this system with EXTREME caution! If you are not well versed in electronics and vehicle instrumentation or are not PC literate, please do not attempt the installation. Refer the installation to an AEM trained tuning shop. A list of AEM trained tuning shops is available at http://www.aemelectronics.com/dealer_locator.php or by calling 800-423-0046. You should also...
Page 2
Page 2 10-3250 for 30-3250 EPM Puck RevA 022212 KIT CONTENTS 1 x 35-3250 EPM ASSEMBLY 1 x 10-9910 DECAL, EPM MODULE 1 x 10-3250 INSTRUCTION MANUAL 1 x 10-922S SILVER AEM DECAL INSTALLATION TIPS 1. Read through the entire manual and instructions before beginning the installation. 2. Disconnect the negative battery cable(s) before beginning any work. 3. Maintain a clean and neat work area through out the installation. 4. When raising or working under a vehicle, use properly rated...
Page 3
Page 3 10-3250 for 30-3250 EPM Puck RevA 022212 EPM WIRING - CONNECTOR PINOUT 1. The EPM has a short cable with a 4 Pin Deutsch connector, supplied with the EPM is the mating connector housing with 5 crimp terminals. The connector pinouts are shown in figure 1. 2. The EPM outputs a 12V square wave, 24 crank signals and 1 short pulse cam signal every 360 degrees. Pin Description Wire Color 1 CRANK Yellow 2 GROUND Black 3 CAM White 4 12V Switched...
Page 4
Page 4 10-3250 for 30-3250 EPM Puck RevA 022212 Figure 3. EPM Mounting Adapter Dimensions
Page 5
Page 5 10-3250 for 30-3250 EPM Puck RevA 022212 Figure 4. EPM Drive Detail & Dimensions
Page 6
Page 6 10-3250 for 30-3250 EPM Puck RevA 022212 SPECIFICATIONS EPM Puck Supply Voltage 12V (nominal) Input Channels 1 x 12V Switched Power During Cranking 1 x Ground Output Channels 1 x CAM 1 x CRANK CAM Ouptut 1 Crank Output 24 Sensors 2 X Zero Speed Optical Operating Voltage (nominal) 8-16 volts dc Enclosure Size 2.9”Ø x 1.16”Height/1.635”Height with Studs 73.7mmØ x 29.5mm Height/41.5mm Height with Studs Weight 0.52 lbs / 235.9 grams WARRANTY 12 Month...