AEM Series 2 Plug Play EMS 306060 User Manual

							 Page 11 of 12  
30-1060 (Series 1) vs 30-6060 (Series 2)  OBD2A Hon
da EMS pin differences: 
The EMS functions assigned to certain pins have bee n changed and no longer match the 
30-1060 EMS. Unless otherwise noted, the following  pins and functions will need to be 
manually reconfigured after using AEMTuner to conve rt a V1.19 (30-1060, Series 1 EMS) 
calibration for use with the 30-6060 Series 2 hardw are.  
 
 
Pin OBD2A Honda/Acura 30-1060 function 30-6060 function Notes 
B11 ---  Idle #2  Idle 4  Idle 2 available on pin B4 
B13  ---  FM  ---  FM output not available 
B19  ---  Coil #5  ---  Coil 5 output not available 
C9  Feedback at Signal  Injector #7  ---  Injector 7 av ailable on pin B16 
C23 ---  Injector #10i  Injector 12  Inj12 controlled independently of Inj10 
C24 ---  Injector #9i  Injector 11  Inj11 controlled indep endently of Inj9 
C28 ---  ---  CAN1L   
C29 ---  ---  CAN1H   
C30 ATTS Transmit  PW #2i  ---  PW 2i not available  
						

							 Page 12 of 12 
 
AEM Electronics Warranty 
  
Advanced Engine Management Inc. warrants to the con sumer that all AEM Electronics 
products will be free from defects in material and  workmanship for a period of twelve 
months from date of the original purchase. Products  that fail within this 12-month warranty 
period will be repaired or replaced when determined  by AEM that the product failed due to 
defects in material or workmanship. This warranty i s limited to the repair or replacement of 
the AEM part. In no event shall this warranty excee d the original purchase price of the 
AEM part nor shall AEM be responsible for special,  incidental or consequential damages 
or cost incurred due to the failure of this product . Warranty claims to AEM must be 
transportation prepaid and accompanied with dated p roof of purchase. This warranty 
applies only to the original purchaser of product a nd is non-transferable. All implied 
warranties shall be limited in duration to the said  12-month warranty period. Improper use 
or installation, accident, abuse, unauthorized repa irs or alterations voids this warranty. 
AEM disclaims any liability for consequential damag es due to breach of any written or 
implied warranty on all products manufactured by AE M. Warranty returns will only be 
accepted by AEM when accompanied by a valid Return  Merchandise Authorization (RMA) 
number.  Product must be received by AEM within 30  days of the date the RMA is issued. 
   
Please note that before AEM can issue an RMA for an y electronic product, it is first 
necessary for the installer or end user to contact  the tech line at 1-800-423-0046 to 
discuss the problem.  Most issues can be resolved o ver the phone.  Under no 
circumstances should a system be returned or a RMA  requested before the above 
process transpires.
 
  
AEM will not be responsible for electronic products  that are installed incorrectly, installed 
in a non approved application, misused, or tampered  with.  
  
Any AEM electronics product can be returned for rep air if it is out of the warranty period. 
There is a minimum charge of $50.00 for inspection  and diagnosis of AEM electronic 
parts. Parts used in the repair of AEM electronic c omponents will be extra. AEM will 
provide an estimate of repairs and receive written  or electronic authorization before 
repairs are made to the product.