AGFA AP DC1033m User Manual

							AgfaPhoto DC-1033m   
 
46 
Protecting a Single File 
    
Turn the power on, and set the camera to the PLAYBACK mode   
(
page 13). 
    
Open the menu. 
y Press the MENU button, then use the four-way control to select Protect 
(
) and press the SET button. 
 
   
Press 
 or   to select [SINGLE], and then press the SET button. 
   
Press 
 or   to select the image you want to protect. 
   
Press the SET button to protect the image. 
y  When the file is locked, the 
  displays on the LCD monitor. 
y  Repeat step 4~5 to protect images. 
y  To unlock the file, press the SET button again in step 5. The 
 will 
disappear and the file is unlocked. 
 
Protecting All Files 
   
Turn the power on, and set the camera 
to the PLAYBACK mode (
page 13).
   
Open the menu. 
y Press the MENU button, then use 
the four-way control to select 
Protect (
) and press the SET 
button. 
y  You can open the menu in full screen 
or in thumbnail.  
   
Press 
 or   to select [Lock all], and then press the SET button. 
y  To unlock all files, select [Unlock all] in this step, then press the SET button. 
   
Press the SET button to protect all images. 
 
1 
2 
3 
4 
5 
3 
1 
2 
4  
						

							AgfaPhoto DC-1033m   
 
47 
Protecting Multiple Files 
   
Turn the power on, and set the 
camera to the thumbnail screen 
(
page 43). 
   
Open the menu. 
y Press the MENU button, then 
Press 
 or   to select to 
select Protect (
) and press 
the SET button. 
 
   
Press 
 or   to select [Select], and then press the SET button. 
y  The frame of the selected image turns green. 
   
Select multiple images. 
y  Use the four-way control to select the image. 
y Press the SET button toggles the 
  on and off. Repeat this step until all 
images that you want to protect are displayed with an icon
. 
   
Protect images. 
y Press the MENU button, then select [Yes] and press the SET button. All 
selected images will be protected. 
y  To cancel protect, press the MENU button in this step. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1 
2 
3 
4 
5  
						

							AgfaPhoto DC-1033m   
 
48 
Editing Images 
  Rotating Still Images 
   
Turn the power on, and set the 
camera to the PLAYBACK 
mode (
page 13). 
   
Press 
 or   to select the 
image you want to rotate.  
   
Open the menu. 
y Press the MENU button, then use the four-way control to select Rotate 
(
) and press the SET button. 
   
Press the SET button to rotate the image. 
y  Each press rotates the image 90 degrees in clockwise. 
   
Press 
 or   to select OK, and then press the SET button to finish 
rotating. 
 
Changing the Image Size 
    
Turn the power on, and set the camera to the PLAYBACK mode 
(
page 13). 
    
Press 
 or   to select the image you want to resize. 
 
   
Open the menu. 
y Press the MENU button, then use the four-way control to select Resize 
(
) and press the SET button. 
   
Press 
 or   to select an option, and then press the SET button. 
y  The resized image will be saved as a new file. 
 
 
y  Only a large size image can be resize to a smaller one. 
3 
1 
2 
4 
5 
1 
2 
3 
4 
 C C
a a
u u
t t
i i
o o
n n
    
						

							AgfaPhoto DC-1033m   
 
49 
Changing the Image with Effects 
You may use Red Eye Removal remove the red eye caused by flash from original photo.   
Or use color filters to save as a new image. 
    
Turn the power on, and set the camera to the PLAYBACK mode 
(
page 13). 
    
Press 
 or   to select the image you want to add the effect. 
 
   
Open the menu. 
y Press the MENU button, then use the four-way control to select Photo Edit 
(
) and press the SET button. 
   
Press 
 or   to select an option, and then press the SET button. 
y  The edited image will be saved as a new file. 
 
Choosing the Image with Photo Frame 
   
Turn the power on, and set the camera to the PLAYBACK mode 
(
page 13). 
   
Press 
 or   to select the image you want to add the photo frame. 
   
Open the menu. 
y Press the MENU button, then use the four-way control to select Photo 
Fames (
) and press the SET button. 
   
Press 
 or   to select the image you want, then press the SET button to 
apply the choice. 
y  The edited image will be saved as a new file. 
 
 
 
 
 
1 
2 
3 
4 
1 
2 
3 
4  
						

							AgfaPhoto DC-1033m   
 
50 
Copying the Files 
You may copy the data from the camera’s internal memory to the memory card for 
convenience. 
   
Be sure you have inserted a memory 
card into your digital camera.    Set 
the camera to the PLAYBACK mode. 
(
 page 13). 
   
Open the menu. 
y Press the MENU button, then use 
the four-way control to select 
Copy to card (
) and press the 
SET button.  
   
Press 
 or   to select [Single], then press the SET button. 
y  To copy all images to a memory card, select [All]. 
   
Press 
 or   to select the image you want to copy to a card. 
   
Select [Yes] and then press the SET button to start copy. 
y  Repeat step 4~5 to copy other images. 
y Press the MENU button to complete the setting. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3 
1 
2 
4 
5  
						

							AgfaPhoto DC-1033m   
 
51 
Setting the DPOF 
The Digital Print Order Format (DPOF) setting allows you to select images on the 
memory card for printing and specify the number of print copies in advance using the 
camera. This is extremely convenient for sending the images to a photo developing 
service or for printing on a direct print function compatible printer. 
   
Turn the power on, and set 
the camera to the PLAYBACK 
mode (
page 13). 
   
Open the menu. 
y Press the MENU button, 
then use the four-way 
control to select DPOF 
(
) and press the SET 
button.  
  s 
Press 
 or   to select [Single], then press the SET button. 
y  To set the DPOF setting for all images, select [All] in this step. 
y  To reset all DPOF settings to initial default, select [Reset] in this step. 
   
Press 
 or   to select the image you want to print out. 
   
Set the number of copies. 
y Press 
 or   to specify the number of copies. 
y  The number of copies can be set from 0 to 30. 
y  To cancel this image DPOF setting, set the number of copies to 0. 
   
Print the date stamp out. 
y  Press SCN button to set the date stamp of current image. Press SCN button 
again to turn off date stamp. 
y  Repeat step 4~6 to other images for printing. 
   
After you finished all image settings, press the SET or MENU button to 
apply it. 
 
 
 
3 
1 
2 
4 
5 
6 
7  
						

							AgfaPhoto DC-1033m   
 
52 
Choosing a Startup Image 
    
Turn the power on, and set the camera to the PLAYBACK mode 
 (
page 13). 
    
Open the menu. 
y Press the MENU button, then use the four-way control to select Start-up 
Image (
) and press the SET button. 
   
Press 
 or   to select the image you want, then press the SET button to 
apply the choice. 
y  A message “Completed” appears. 
   
Set the camera to the Setup Menu (
page 18). 
   
Press 
 or  to select 
Start-up .Image (
) then press  
or the SET button. 
   
Press 
 or   to select a desired 
option and press the SET button to 
apply the setting.  
 
[Off]: Disable the start-up image. 
 
[System]: Use camera default image. 
 
[My image]: Use the image that you just specified in step 3. 
   
Press the MENU button to close the menu. 
 
 
 
 
 
 
 
 
y  The start-up image will not be deleted even if the original image is deleted or 
memory formatted. 
3 
1 
2 
4 
5 
6 
7 
 C C
a a
u u
t t
i i
o o
n n
    
						

							AgfaPhoto DC-1033m   
 
53 
Making Connections 
Connecting the Camera to a TV 
You can display recorded images on a television with a supplied AV cable. 
 
 
    
Set the TV out to match the TV system that you are using (
page 19). 
    
Turn off the camera and the TV. 
   
Use the supplied AV cable to connect the camera to the TV set. 
   
Set the TV input signal to Video In. 
y  Refer to the documentation included with your TV for more information. 
   
Display on TV. 
y  Everything that would normally appear on the camera’s LCD screen, such 
as photo and video clip playback, slide shows, and image or video capture, 
appears on the TV. 
 
 
 
 
3 
1 
2 
4 
5  
						

							AgfaPhoto DC-1033m   
 
54 
Connecting the Camera to a PC 
There are two ways to download files from the camera’s internal memory or memory 
card to a computer: 
y  Inserting the memory card into a card reader 
y  Connecting the camera to a computer using the supplied USB cable 
Using the Card Reader 
   
Eject the memory card from the camera 
and insert it in a card reader that is 
connected to a computer. 
   
Open [My Computer] or [Windows 
Explorer] and double-click the removable 
drive icon that represents the memory 
card. 
 
   
Copy images from the card into a directory of your choice on the 
computer’s hard disk. 
 
Connecting the Camera to a Computer with the USB Cable 
   
Install the USB software driver included 
with the bundled CD-ROM. 
   
Connect the supplied USB cable to the 
computer’s USB port and turn on the 
camera. 
y  The LCD screen turns off when the 
connection to the computer has been 
successfully completed. 
 
   
Open [My Computer] or [Windows Explorer]. A “Removable Disk” appears 
in the drive list. 
   
Double-click the “Removable Disk” icon to view its contents. 
y  Files stored on camera are located in the folder name “DCIM”. 
3 
1 
2 
3 
1 
2 
4  
						

							AgfaPhoto DC-1033m   
 
55 
Appendix 
About the Folder & File Name 
Your digital camera automatically creates a directory of folders in the internal memory or 
memory card that it uses to organize still images, movie clips and other information. 
Folder Structure 
Folder name begins with a 3-digit number from 
100 to 999 and followed by “DICAM”, each folder 
holds up to 9999 files.    If new files are made, a 
new folder named in sequence will be made 
automatically. 
 
 
File Naming 
File name begins with “DSCI” and are followed by a 4-digit number that increases in 
sequence. File numbering starts from 0001 when a new folder is created. 
 
If the highest folder number is 999 and highest file number exceeds 9999, the camera 
will display the warning message “Folder cannot be created”. When it appears, try one of 
the following ways: 
 
y  Reset the file number and plug in a new memory card. 
y  The folder number and file number are initialized and renumbered from 100 and 
0001 respectively. 
 
 
 
 
y  Do not change the folder and file names in the memory card using your 
computer. It may be unable to playback the data using the digital camera. 
 
 C C
a a
u u
t t
i i
o o
n n