AGFA AP DV5000G User Manual

							 
 
30
 
Multi-Snap (Picture Record Mode Only) 
With the camera set to Multi-Snap Mode, you can take five continuous pictures.   
To enable Multi-Snap: 
1. When in Camera Mode, use Up/Down Buttons (Tele-Wide Buttons) (
) to select 
Multi-Snap, then press OK Button to switch to Multi-Snap submenu. 
2. Use Up/Down Buttons to choose On or Off.   
3. Press OK Button to validate the setting and exit.
 
 
 Display Screen Multi-Snap Option 
    
 
Backlight (Picture Record Mode Only) 
With the camera set to backlight Mode, you can take shots when bright light is behind the 
subject.  
To enable Backlight: 
1. When in Camera Mode, use Up/Down Buttons (Tele-Wide Buttons) (
) to select Backlight, 
then press OK Buttons to switch to Backlight submenu. 
2. Use Up/Down Buttons to choose On or Off.   
3. Press OK Button to validate the setting and exit.
 
 
 Display Screen Backlight Option 
 
 
OK Button 
OK Button  
						

							 
 
31
Date Printing (Picture Record Mode Only) 
To enable Date Printing: 
1. When in Camera Mode, use Up/Down Buttons (Tele-Wide Buttons) (
) to select Date 
Printing, then press OK Button to switch to Date Printing submenu. 
2. Use Up/Down Buttons to choose On or Off.   
3. Press OK Button to validate the setting and exit.
 
 
Display Screen Date Printing Option 
 
 
Note 
 
Date would be shown on the printed picture 
once date printing is enabled.  
 
 
Night Mode 
Use Night Mode for night scenes or low light conditions. A longer exposure captures more 
detail of background subjects. 
 
Display Screen Night Mode Option 
  
 
Note 
To avoid blurry pictures, place the camera on a flat, 
steady surface, or use a tripod. 
 
OK Button 
OK Button  
						

							 
 
32
Voice Mode 
To enable voice recording:   
1. In Movie/Picture Record Mode, press OK Button to switch to record menu screen. 
2. Use Right/Left Buttons to move to Voice Option. Then Voice Submenu will pop out on the 
screen. 
3. Choose Enter option to enable voice recording and press OK Button to enter Voice Record 
Mode. 
4. Press Movie Shutter Button (
) to record voice and press it again to stop. 
Display Screen Voice Mode Option 
 
 
 
 
Effect Setting 
There are four modes which are Normal, Black/White, Classic and Negative. 
To change Effect setting: 
1. In Movie/Picture Record Mode, press OK Button to switch to record menu screen. 
2. Use Right/Left Buttons to move to Effect Option. Then Effect Submenu will pop out on the 
screen. 
3. Use Up/Down Buttons (Tele-Wide Buttons) (
) to move between four settings. The change 
can be previewed immediately. 
4. Press OK Button to validate the setting and exit. 
 
Display Screen 
 
OK Button  
						

							 
 
33
 
Setting Menu 
The Setting submenu contains options for configuring your camera set up. 
To change advanced setting: 
1. In Movie/Picture Record Mode, press OK Button to switch to record menu screen. 
2. Use Right/Left Buttons to move to Setting option, then Setting Submenu will pop out on the 
screen. 
3. Use Up/Down Buttons (Tele-Wide Buttons) (
) to move between settings. 
 
Display Screen Setting Option 
 
z Sound (operation sound) 
z Start-up Screen 
z Time Setting 
z Format Memory 
z TV System 
z Language 
z Default Setting 
 
 
Sound Setting 
Enable or disable KeyPad tone and operation sound by using Up/Down Buttons (Tele-Wide 
Buttons) (
), the press OK Button to validate the setting. 
Submenu Display Screen Sound Setting 
Sound 
  
  
						

							 
 
34
Start-up Screen 
Customize the Start-up Screen with your favorite pictures. Press Right/Left Buttons to select the 
picture you want and press OK Button to validate the setting and exit.
  
 
Submenu Display Screen Start-up Screen   
Start-up Screen 
  
) 
If you do not want to customize the start up screen, press Left/Right Buttons and select No 
Start-up Screen. 
No Start-up Screen   
 
 
Time Setting 
z Move between Date, Time, Set and Exit by using Left/Right Buttons. 
z Adjust date and time by using Up/Down Buttons, then select Set to validate each change. 
z Select Exit to leave Time Setting without any change. 
 
Submenu Display Screen Time Setting 
Time Setting 
  
						

							 
 
35
 
Format Card 
Submenu Display Screen Format Card Options 
Format Card 
  
 
Yes: Format the SD Card / built-in memory   
No (Default): Do not format SD Card / built in memory 
 
Note 
 z All the data will be erased if the SD card is formatted. Make sure 
all the data are duplicated to PC before formatting SD card. 
 
 
 
TV System 
Ensure that the appropriate TV standard of your area is selected – either NTSC or PAL. 
Wrong TV system setting may cause image flicker. 
NTSC standard: USA, Canada, Japan, South Korea and Taiwan etc. 
PAL standard: UK, Europe, China, Australia, Singapore and Hong Kong etc. 
 
Submenu Display Screen TV System Option 
TV System 
   
						

							 
 
36
Selecting Interface Language   
 
Submenu Display Screen 
Language 
 
 
Default Setting 
To restore the default factory setting, select this option.   
 
Submenu Display Screen Default Setting Options 
Default Setting 
   
						

							 
 
37
 4 
Playback Mode 
Press RECORD/PLAY Button to switch from Record Mode to Playback Mode. The Playback 
Mode is for viewing and managing movies and pictures as well as listening to voice and music, 
or read eBook on the built-in memory or on an optional memory card. 
 
Operation Display Screen 
Press RECORD/PLAY Button (/ ) to 
switch from Record Mode to Playback Mode Main 
Menu. 
z There are five options in the Playback Mode, movie, 
picture, voice, music, and eBook. 
z Direction Buttons can be used to select the specific 
option. 
z Press OK Button to view movies/pictures, listen to 
voice/music, or read eBook. 
 
 
 
Button Functions 
The Direction Buttons have the following functions in Movie and Picture Playback Modes.   
 
 
 Right Button: Go to the next movie/ picture. 
 
Left Button: Go to the previous movie/ picture. 
Tele Button (Up Button): Digital zoom in 
Wide Button (Down Button): Digital zoom out 
 
 
 OK Button: Enter movie, picture, voice or music 
option menu 
 
 
Direction 
Buttons  
OK Button  
						

							 
 
38
 /  
 RECORD/PLAY Button functions:   
1. Switch between Record and Playback modes.
2. Return to the previous page.         
 /  Movie Shutter Button: 
Start playing the recorded movie or voice 
 
 
LCD Monitor Information 
Indicators on the LCD screen while in Playback Mode： 
 
 
Mode Indicator 
 Movie Playback Mode 
 Picture Playback Mode 
 Voice Playback Mode 
 Music Playback Mode 
(1) 
 eBook Playback Mode 
Resolution Indicator 
 D1 
 High Resolution 
 Standard Resolution 
(2) 
 Low Resolution 
Indicate the selected movie/picture is locked. (3) 
Indicate the single movie/voice/MP3 is being repeated.    
						

							 
 
39
Indicate all of the movies/voices/MP3 are being repeated.   
  Indicate the slide show is playing. 
(4) Current Number/ Total number of movie, picture, voice, or MP3. 
(5)  Magnification Indicator.  
 
Movie Playback 
Operation Display Screen 
1. Use Direction Buttons to select the Movie option. 
2. Press OK Button to go to Movie Playback Mode. 
3. Use Right/Left Buttons to go to the next or last movie. 
4. Press Movie Shutter Button to play and press it again to 
pause. 
5. While playing movie, press Right/Left Buttons to fast 
forward/backward, and then release the button to stop. 
6. Use Up/Down Buttons to adjust volume. 
 
7. Press OK Button to go to the movie option menu.   
8. Use Right/Left Buttons to select six options, Delete, 
Thumbnail, Lock, Repeat One, Repeat All, or Exit.