AGFA AP Microflex 102 User Manual

							 
 60 
 
 
 
6.3.4 Metering 
The Metering function allows you to select the area of the subject or  frame by which the camera measures light to record images. 
 
1.  Set the camera to the DSC Mode. 
2.  Press the MENU Button and move the 4-Way Direction Button to  highlight the Metering item. Press the SET Button to display the 
submenu or touch the screen to select the item. 
3.  Press the 4-Way Direction Button to select Spot, Center or  Touch AE. Press the SET Button to  confirm or touch the screen 
to select the item. 
 
   
						

							 
 61 
6.3.5 Backlight 
1.  Turn on the camera and make sure it is in the DSC Mode. 
2.  Press the MENU Button and move the 4-Way Direction Button to highlight the Backlight item. Press the SET Button to display the 
submenu or touch the screen to select the item. 
3.  Press the 4-Way Direction Button to select ON or OFF. Press  the SET Button to confirm or touch the screen to select the item. 
   
 
6.3.6 Night Mode 
1.  Set the camera to the DSC Mode. 
2.  Press the MENU Button and move the 4-Way Direction Button  to highlight the Night Mode item. Press the SET Button to 
display the submenu or touch the screen to select the item. 
3.  Press the 4-Way Direction Button  to select On or Off. Press the 
SET Button to confirm or touch the screen to select the item. 
 
 
  
						

							 
 62 
 
 
 
6.3.7 Self-Timer 
1.  Set the camera to the DSC Mode. 
2.  Press the MENU Button and use the 4-Way Direction Button to  highlight the Self-timer item. Press the SET Button to display the 
submenu or touch the screen to select the item. 
3.  Press the 4-Way Direction Button  to select OFF, 2 Sec or 10 sec. 
Press the SET Button to confirm or touch the screen to select 
the item. 
   
 
    
						

							 
 63 
2 sec. Self-timer
:  
The image will be taken 2 seconds after the shutter is released.     
10 sec. Self-timer : 
The image will be taken 10 seconds after the shutter is 
released.   
6.3.8 Continuous Shot You can continuously record thre e pictures using this function, 
started by pressing and holding the Shutter Button and ending 
automatically after taking the third picture. 
1.  Set the camera to the DSC Mode. 
2.  Press the MENU Button and press the 4-Way Direction Button  to highlight the Continuous Shot item. Press the SET Button to 
display the submenu or touch the screen to select the item. 
3.  Press the 4-Way Direction Button to select OFF or ON. Press  the SET Button to confirm or touch the screen to select the item. 
 
 
 
  
						

							 
 64 
 
6.3.9 EV Compensation You can adjust the value of the exposure compensation which 
ranges from -2.0EV to +2.0EV (in 0.5EV increments). The higher the 
EV value, the brighter the image will be. 
1.  Set the camera to the DSC Mode. 
2.  Press the MENU Button and press the 4-Way Direction Button to  highlight the EV Compression item. Press the SET Button to 
display the submenu or touch the screen to select the item. 
3.  Press the 4-Way Direction Button to adjust the exposure value  (-2.0 ~ +2.0). Press the SET Button to confirm or touch the 
screen to select the item. 
 
 
 
 
 
 
 
 
 
  
						

							 
 65 
6.4  Playback Menus 
6.4.1 Delete Use this function to delete files. 
1.  Set the camera to the Playback Mode.     
2.  Press the MENU Button and press the 4-Way Direction Button  down or touch the screen to select the file to be deleted or to 
delete all files. 
3.  Press the 4-Way Direction Button or touch the screen to select  “Delete One” or “Delete All” to display the submenu. 
 
 
 
 
 
 
 
 
 
 
 
  
						

							 
 66 
4.  Press the 4-Way Direction Button or touch the screen to select 
“O” Yes  or “X” No  and press the SET Button to delete file(s). 
 
Note : Files cannot be ret

rieved once deleted. Therefore please 
make sure you have backed up the files before deleting. Protected files cannot be deleted. To delete these, you must first unlock the file.  
						

							 
 67 
6.4.2 Protect 1.  Turn on the camera and switch to the Playback Mode. 
2.  Select the file you want to protect. 
3.  Press the MENU Button and move the 4-Way Direction Button to highlight the Protect item. Press the SET Button to display the 
submenu or touch the screen to select the item. 
4.  Press the 4-Way Direction Button or touch the screen to select  the item. Press the SET Button or  touch the screen to confirm. 
The Locked icon 
 will be displayed to indicate the file is 
protected. 
 
 
 
 
 
Note : Repeat th

e above steps to unlock the file. When the file is 
unlocked, the Locked icon  will disappear. 
      Protect Lock 
   
  
						

							 
 68 
6.4.3 Autoplay 
You can set the camera to display images in a slide show at a 
regular interval. 
1.  Set the camera to the Playback Mode. 
2.  Press the MENU Button and move the 4-Way Direction Button to  select Autoplay. Press the SET Button to display the submenu or 
touch the screen to select the item. 
3.  Press the 4-Way Direction Butto n or touch the screen to select 
Off, 1sec or 3 sec. The images will be displayed 
automatically. 
 
 
 
 
 
 
 
 
 
 
 
  
						

							 
 69 
6.4.4 Rotate 
1.  Set the camera to the Playback Mode.     
2.  Use the 4-Way Direction Button to highlight the Rotate item and press the SET Button or touch the screen to select Left 90º or 
Right 90º.