AGFA AP PRECISA1430 User Manual

							5859
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
Date/Time
See “Setting
 the
 Date
 and
 Time
“ sect on on page 15.
Language
See “Setting
 the
 Language
“ sect on on page 14.
Format Memory
Please note: formattng enables you to delete all contents 
n the memory card and bu lt- n memory,  nclud ng protected 
photo and move files.
To use ths settng:
1.  Select the Format 
 n Fle and Software menu.
2.  Use the  Up/Down
 nav
 gaton buttons to select  Yes
 or 
No . Then press the 
 button to confirm.
3.  The current meda s formatted.
Fle and Software 
						

							5859
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
59
AgfaPhoto PRECISA 1430AgfaPhoto PRECISA 1430
File Numbering
After you take a pcture or vdeo clp, the camera wll save 
t as file that ends wth a seral number. You can use ths 
tem to choose whether the file s serally numbered or 
begns wth 1 and s saved n another folder on the memory 
card.
1. Select the F
 le Name n Fle and Software menu.
2.  Select the opt
 on wth the Up/Down button and press 
the  button for confirmaton.
Copy to Card (Copy internal memory to 
memory card)
Use ths settng to copy the files stored n the nternal 
memory to the memory card.
1.  Select the Copy to memory card 
 n Fle and Software 
menu.
2.  Use the Up/Down nav
 gaton buttons to select Yes or 
No. Then press the  button to confirm. 
						

							60
AgfaPhoto PRECISA 1430AgfaPhoto PRECISA 1430
6061
FW Version (Firmware Version)
Use ths settng to vew the current camera firmware 
verson.
1. Select the  FW Version
 
 n Fle and Software menu.
2.  If SD card contans a new verson of firmware, please 
upgrade accordngly as necessary. 
To update to the latest firmware verson, you can go 
to the followng webste:www.reddotmagng.com. 
and look under Support.
Reset Settings
Use ths settng to restore the camera to ts default 
settngs.
1. Select the Reset sett
 ng n Fle and Software menu.
2.  Use the Up/Down nav
 gaton buttons to select Yes or 
No. Then press the  button to confirm. 
						

							AgfaPhoto PRECISA 1430AgfaPhoto PRECISA 1430
6061
The vdeo output sgnal can be swtched to NTSC or PAL to 
accommodate dfferent regonal standards. The approprate 
settng wll vary between regons.
NTSC:  USA, Canada, Ta
 wan, Japan, etc.
PAL:  Europe, Asa (excludng Tawan), Oceana, etc.
Note:   
The TV output w
 ll not dsplay properly f an 
ncorrect vdeo system s selected.
Use ths settng to determne your vdeo system n the 
current area.
1.
   Select the Video System  n Connecton Setup menu.
2.  Use the Up/Down nav
 gaton buttons to select NTSC or 
PAL. Then press the  button to confirm. 
Vdeo System
Transmsson 
						

							6263
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
Connectng to a PC
Use the USB cable and ArcSoft software (CD-ROM) suppled 
wth your camera to copy (transfer) pctures to a computer.
Setting the USB mode
Snce the camera’s USB port can be set to connect wth 
ether a PC or a Prnter, the followng steps wll allow you to 
ensure that the camera s correctly configured to connect 
wth a PC.
1.  Go to the camera settng menu, select USB connecton 
wth the Up/Down button, and press the Rght button.
2.  Use the  Up/Down
 nav
 gaton buttons to select  PC
.
3.
  Press the 
 button to confirm the settng.
Transferring files to your PC
The computer wll automatcally detect the camera as a 
removable drve. Double-clck  My
 Computer
  con on the 
desktop to locate the removable drve and to copy the 
folders and files n the drve to a drectory on your PC as 
you would copy any typcal folder or file.
By usng the USB cable, you can transfer the captured 
photos and vdeos to a PC. Follow the steps below to 
connect the camera to a PC.
1.

  Start a computer to whch ArcSoft software has been 
nstalled.
2.  Make sure both the camera and PC are turned on. 
3.  Connect one end of the suppled USB cable to the USB/
AV OUT port on your camera.
4.

  Connect the other end of the cable to an avalable USB 
port on your PC. 
						

							6263
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
63
AgfaPhoto PRECISA 1430AgfaPhoto PRECISA 1430
Wndows operatng system (Wndows 2000, Wndows 
XP, Wndows Vsta, Wndows 7.)
Clck the [Safely remove the hardware] con and remove 
the USB connector accordng to the appeared menu.
Macntosh
Drag the unttled con to the Trash. ("Unttled")
5. Dsconnect the camera once transfer s completed.
If the USB option is set to [PC]  :
Turn the camera off and d

sconnect the USB cable.
If the USB option is set to [PC (PTP) ] :
Remove the camera from the system as descr
 bed below 
before turnng the camera off and dsconnectng the USB 
cable. 
						

							6465
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
Connectng to a PctBrdge Compatble Prnter
PctBrdge allows prntng mages from a 
memory card n a dgtal camera drectly to a 
prnter, regardless of brand. To find out f a 
prnter s PctBrdge compatble, smply look 
for the PctBrdge logo on the packagng or 
check the manual for specficatons.Wth 
the PctBrdge functon on your camera, you can prnt the 
captured photos drectly wth a PctBrdge compatble 
prnter usng the suppled USB cable, wthout the need for 
a PC.
Setting the USB mode
Snce the camera’s USB port can be set to connect wth 
ether a PC or a Prnter, the followng steps wll allow you to 
ensure that the camera s correctly configured to connect 
wth a Prnter.
1.  Go to the camera settng menu, select USB connecton 
wth the Up/Down button, and press the Rght button.
2.  Use  Up/Down to select Printer. 3.
 
Press the 
 button to confirm the settng.
After the camera s reset, t wll swtch to PC mode 
automatcally from USB mode. 
						

							6465
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
65
AgfaPhoto PRECISA 1430AgfaPhoto PRECISA 1430
Connecting the camera and printer.
1. Make sure both the camera and prnter are turned on. 
2.  Connect one end of the suppled USB cable to the USB 
port on your camera.
3.

  Connect the other end of the cable to the USB port on 
the prnter.
If the camera s not connected to a PctBrdge compatble 
prnter, the followng error message appears on the LCD 
screen.
The above error message would also appear f the 
USB mode were set ncorrectly, n whch case you 
should dsconnect the USB cable, check the USB 
mode settngs, ensure that the Prnter s turned on, 
and then try connectng the USB cable agan. 
						

							6667
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
After settng the USB mode to Prnter, the PictBridge menu 
appears. 
Select a menu tem wth the Up/Down button and press 
the Rght button or  button to enter the tem.
Refer to the followng sectons for more detaled nforma -
t

on on each settng.
Print with date
If you have set the date and tme of your camera, the date 
and tme wll be recorded and saved wth each photo you 
take.
1.

  Select  Print with date from the PictBridge menu.  The 
follow

ng screen appears.
2.  Use the Left/Right nav gaton buttons to scroll through 
the photos.
Usng the PctBrdge Menu 
						

							6667
AgfaPhoto PRECISA 1430 AgfaPhoto PRECISA 1430
67
AgfaPhoto PRECISA 1430AgfaPhoto PRECISA 1430
3. Use the Up/Down nav gaton buttons to select the 
number of prnts for the current dsplayed photo.
4.  Press the 
 button and the followng screen appears.
5. Select Yes to confirm the pr ntng, or Cancel. Then 
press the  button.
Print without date
Use ths settng to prnt the photos wthout dates on them. 
1.  Select Print without date from the PictBridge menu. 
The follow

ng screen appears.
2.  Use the Left/Right nav gaton buttons to scroll through 
the mages.
3.  Use the Up/Down nav
 gaton buttons to select the 
number of prnts for the current dsplayed mage.
4.  Press the 
 button and the followng screen appears.