Aimco Brakes AcraDyne Gen 3 1000 Series Nutrunner Manual
Have a look at the manual Aimco Brakes AcraDyne Gen 3 1000 Series Nutrunner Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 85 Aimco Brakes manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 2
Introduction
SAVE THESE INSTRUCTIONS
1) WORK AREA
a) Keep work area clean and well lit. Cluttered and dark areas invite accid\
ents.
b) Do not operate power tools in explosive atmospheres, such as the presenc\
e of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distract\
ions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never...](http://img.usermanuals.tech/thumb/236/3588/w64_acradyne-gen-3-1000-series-nutrunner-manual-1478635441_d-1.png "Page 2
Introduction
SAVE THESE INSTRUCTIONS
1) WORK AREA
a) Keep work area clean and well lit. Cluttered and dark areas invite accid\
ents.
b) Do not operate power tools in explosive atmospheres, such as the presenc\
e of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distract\
ions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never...")
![Page 8
ADJUSTING THE THROTTLE LEVER TO ANGLE HEAD LOCATION
(REQUIRES OPTIONAL P/N 25444)
1. REMOVE THE ANGLE HEAD
1.1. Hold the angle head and with a 1-3/8" crows foot loosen and remove the g\
ear casing
from the angle head.
2. INSTALL ADJUSTMENT SHIMS
2.1. Shim kit part number 25444 is needed for the 1000 series.
2.2. Add adjustment shims as needed to align the angle head with the throttle\
lever.
3. REINSTALL THE ANGLE HEAD
3.1. Apply Loctite 243 to the threads on the angle head.
3.2....](http://img.usermanuals.tech/thumb/236/3588/w64_acradyne-gen-3-1000-series-nutrunner-manual-1478635441_d-7.png "Page 8
ADJUSTING THE THROTTLE LEVER TO ANGLE HEAD LOCATION
(REQUIRES OPTIONAL P/N 25444)
1. REMOVE THE ANGLE HEAD
1.1. Hold the angle head and with a 1-3/8\" crows foot loosen and remove the g\
ear casing
from the angle head.
2. INSTALL ADJUSTMENT SHIMS
2.1. Shim kit part number 25444 is needed for the 1000 series.
2.2. Add adjustment shims as needed to align the angle head with the throttle\
lever.
3. REINSTALL THE ANGLE HEAD
3.1. Apply Loctite 243 to the threads on the angle head.
3.2....")
AIMCO CORPORATE HEADQUARTERS AIMCO CORPORATION DE MEXICO SA DE CV10000 SE PINE STREET AVE . CRISTOBAL COLON 14529PORTLAND, OREGON 97216 CHIHUAHUA , CHIHUAHUA. 31125PHONE: (503) 254–6600 MEXICOTOLL FREE: 1-800-852-1368 PHONE: (01-614) 380-1010FAX: (01-614) 380-1019
AIMCO CHINA AIMCO EUROPEROOM 607, NO. 3998 HONGXIN RD DIBAO PLAZA AVENIDA RÍO GALLO, 431MINHANG DISTRICT, SHANGHAI 19174 GALÁPAGOS - GUADALAJARACHINA SPAINPHONE: 0086-21-34319246 P HONE: + 34 673 34 99 25FAX: 0086-21-34319245
LIT-MAN162
REV. 0 4/201 6
PRINTED IN USA ©201 6 AIMCO