Aimco Brakes Freedom3 SPC Sqnet User Manual
Here you can view all the pages of manual Aimco Brakes Freedom3 SPC Sqnet User Manual. The Aimco Brakes manuals for Torque Measurement are available online for free. You can easily download all the documents as PDF.
Page 2
2 General Terms All Rights reserved. Specifications are going to change without notice. Trademarks are the property of SCS Concept and their respective owners. SCS Concept reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein confirmation...
Page 3
[email protected] 3 Battery information according European regulation 2006/66/CE Part no: 313 21 0042 Type: Li-Ion 3.7V 2600 mAh Weight: 84 g After removed, the wasted battery must be dismissed according local regulation
Page 4
4 Revision History Edition Date Description Firmware Version 1.0 02/04/2012 First Edition V8.2k
Page 5
[email protected] 5 Contents USER MANUAL ........................................................................................................................... 1 GENERAL TERMS ................................................................................................................................................................. 2 TERMS OF WARRANTY...
Page 6
6 Freedom³ Tour Freedom³ SPC mode is an Electronic Wrench designed for Quality Control test and Joint Analysis. Freedom³ allows to analyze joints displaying torque/time and torque angle graphs. With Freedom³ it’s possible to see any curves and data for every single test directly on the display, showing the main statistical values. Also, Freedom³,can be use as a tool for production: Freedom³ is developed in 3 version, every version belong to a specific firmware: Lab version...
Page 7
[email protected] 7 NOTE SQ-Net is an SCS software designed to program and receive data from SCS products, in order to store and trace, for every location, joint and tool, all parameters necessary to take under control all production/quality process. VPG is an SCS software designed to drive user step by step directly on production line, using a huge pc display that shows to the operator the joint to tighten or to check (Quality Control). VPG can be used for a single production...
Page 8
8
SPC Quality Control
Smart Break-away
SCS
Freedom³ (fig. 3)
Production line (fig. 1)
Zoom of the display (Fig.4)
With Freedom³ (Fig. 3) is possible to have break-away test directly on production line joints (Fig.
1). Thanks to the new algorithm, to detect the real break-away point (Fig. 4) is easy and fast for
everyone, it’s not more necessary to be an expert to have...
Page 9
[email protected] 9 Joint Analysis Freedom³ is developed to satisfy every kind of customer requests. The Joint Analysis function permits to record the complete torque-angle curve and to analyze it directly on the display of Freedom³ in a quick and precise way, in order to understand joint stiffness. Freedom³ LAB mode can send curves to F3 Explorer software, to display and save curves on user’s computer , in this way, users can...
Page 10
10 Production Tightening Freedom³ can be programmed to work as an assembly tool on production line. FREEDOM³ is the perfect solution for assembly station where it’s necessary an high tightening quality or where it’s not possible to use a power-tool for space problem or for typology of joint (as pipe nut). Freedom³ can work in a stand-alone way (Lab version) programming Fredoom³ locally, or in a remote way (PRW version) programming Freedom³ by SQ-Net...