Air Live Router WL-1500R User Manual

PPPoE with Specify IP 
If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the ISP will provide a Password, User Name and a 
Specify IP Address, choose this option and enter the required information. 
 
Figure 35. 
AirLive WL-1500R User’s Manual 
28  

PPTP/L2TP with Obtain IP Automatically 
If connected to the Internet using a PPTP/L2TP (Dial-up xDSL) connection, enter the your Server IP, PPTP/L2TP Account 
and PPTP/L2TP Password, if your ISP has provided you with a DNS IP address, enter it in the DNS field, otherwise, 
leave it zero. 
 
Figure 36. PPTP 
 
 
Figure 37. L2TP 
 
 
PPTP/L2TP with Specify IP 
If connected to the Internet using a PPTP/L2TP (Dial-up xDSL ) connection, enter the your IP Address, Subnet Mask, 
Gateway IP address, DNS IP...

BigPond Cable 
If your ISP is Big Pond Cable, the ISP will provide a User Name, Password, Authentication Server and Login Server IP 
(Optional).  Choose this option and enter the required information. 
 
 
 
 
Dynamic DNS:   
This synchronizes the DDNS server with  your current Public IP address when you  are online.  First, you need to register 
your preferred DNS with the DDNS provi der.  Then, please selected one of DDNS  server than fill the related information 
in the below fields: Host Name, User...

Wireless setting 
This section enables user to set wireless communications parameters for the routers wireless LAN feature. 
 
Basic 
This page allow user to enable and disable the wireless LAN  function, create a SSID, and select the channel for wireless 
communications. 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 41. 
 
Wireless:  Enables or disables the wireless LAN function of the wireless LAN Router. 
SSID: Type an SSID in the text box. The SSID of any wireless  device must match the SSID typed here in order...

Security 
This function enables user to set authentication type for secure wireless communications. Open System allows public 
access to the router via wireless communications. Shared Ke y requires the user to set a WEP key to exchange data with 
other wireless clients that  have the same WEP key. This router also  supports WPA, WPA2 and WPA-PSK, WPA2-PSK. 
 
Figure 42. 
 
Security: Enable or Disable the wireless LAN security. 
 
WEP 
 
Figure 43. 
AirLive WL-1500R User’s Manual 
32  

WEP: Open System and Shared Key requires the user to set a W EP key to exchange data with other wireless clients that 
have the same WEP key. 
WEP Key Format:  Select the key format from the drop-down list HEX or ASCII. 
WEP Key Length:  Select the level of encryption from the drop- down list. The WLAN Router supports, 64 and 128-bit 
encryption. 
WEP Key 1 ~ 4:  Enables users to create up to 4 different WEP keys. Manually enter a se t of values for each key. Select 
a key to use by clicking the radio...

WPA / WPA2 
Figure 46. Figure 47 
 
If WPA or WPA2 EAP is selected, the above screen is shown.  Pl ease set the length of the encryption key and the 
parameters for the RADIUS server. 
Encryption Type:  Select the encryption type for TKIP or AES encryption.  
RASIUS Server: 
Enter the IP address, Port used and Shared  Secret by the Primary Radius Server. 
Enter the IP address, Port used and Shared Secret by the Secondary Radius Server. (optional) 
AirLive WL-1500R User’s Manual 
34  

Advanced 
This function enables user to configure advanced wireless functions. 
 
Figure 48. 
 
Beacon Interval: Type the beacon interval in the text box. User ca n specify a value from 20 to 1000. The default beacon 
interval is 100. 
RTS Threshold:  Type the RTS (Request-To-Send) threshold in the text  box. This value stabilizes data flow. If data flow is 
irregular, choose values between 256 and 2346 until data flow is normalized. 
Fragmentation Threshold:  Type the fragmentation threshold in the...

LAN Setting 
The function enables user to configure the LAN port IP address & DHCP Server. 
 
Basic 
This page leads to set LAN port properties, such  as the host name, IP address, and subnet mask. 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 49. 
 
Host Name: Type the host name in the text box. The host name is required by some ISPs. The default host name is 
Wireless Router 
IP Address:  This is the IP address of the router. The default IP address is 192.168.1.1. 
Subnet Mask: Type the subnet mask for the router...

                                                             AirLive WL-1500R User’s Manual 
37 
 
DHCP Server:  Enables the DHCP server to allow the router to automatically assign IP addresses to devices connecting 
to the LAN. DHCP is enabled by default. 
DHCP Server Start IP: Type an IP address to serve as the start of  the IP range that DHCP will use to assign IP 
addresses to all LAN devices  connected to the router. 
DHCP Server End IP: Type an IP address to serve as the end of the IP  range that...