Air Live Router WL-1500R User Manual

 Access Control Setting 
This access control enables you to define access restrictions, set up protocol and IP filters, create virtual servers, define 
access for special applications such as games, and set firewall rules. 
 
Filter 
Using filter to deny or allow the users to  access.  Five types of filters to select: MAC, IP Filter, URL blocking, Domain 
blocking and Protocol filter. 
MAC Filters 
 
Figure 51. 
 
MAC Filter:  Enables you to allow or deny Internet access to users within the LAN based up...

Clear: Click to erase all fields and enter new information. 
 
IP Filters 
The IP filter function enables you to define a minimum and maximum IP address range filter; all IP addresses falling within 
the range are not allowed Internet access.  The IP filter profiles are listed in the table at  the bottom of the page. (Note: 
Click anywhere in the item. Once the line is selected, the fields automatically lo ad the items parameters, which you can 
edit.) 
 
Figure 52. 
 
Enable:  Click to enable or...

URL Blocking 
You could enable URL blocking to deny the users from accessing the specified URL.  Add those specified URL in the text 
box. 
 
Figure 53 
 
Enable / Disable:  Enable or Disable the URL blocki ng function of the WLAN Router. 
Add: Click to add the specific URL to the URL blocking list. 
Delete:  Selected a URL from the blocking list then click the  Delete button to remove the URL from the URL Blocking list. 
AirLive WL-1500R User’s Manual 
40  

Domain Blocking 
You could specify the domains that allow users to access or deny by clicking one of the two items.  Also, add the 
specified domains in the text box. 
 
Figure 54. 
 
Disable:  Disable the Domain Blocking function. 
Allow: Allow users to access all domains except “Blocking Domains”. 
Deny: Deny users to access all domains except “Permitted Domains”. 
Blocked/Permitted Domains:  List domains you will Blocked or Permitted. 
Apply: Click to add domain to the Blocked/Permitted Domains list....

Protocol Filters 
This protocol filter enables you to allow and deny access based upon a communications protocol list you create. The 
protocol filter profiles are listed in  the table at the bottom of the page. 
Note: When selecting items in the table at  the bottom, click anywhere in the item. The line is selected, and the fields 
automatically load the items  parameters, which you can edit.  
 
Figure 55. 
 
Enable: Click to enable or disable the Protocol filter. 
Name: Type the name of the user to...

The WLAN Router redirects the request via the protocol and port numbers to the correct LAN server. The Virtual Sever 
profiles are listed in the table at the bottom of the page. 
Note: When selecting items in the table at  the bottom, click anywhere in the item. The line is selected, and the fields 
automatically load the items par ameters, which user can edit. 
 
Figure 56 
 
Enable: Click to enable or disable the virtual server. 
Name: Type a descriptive name for the virtual server. 
Protocol:  Select...

 
Figure 57. 
 
Enable: Click to enable or disable the application profile. When  enabled, users will be able to connect to the application 
via the WLAN Router’s WAN connection. Click “Disabled” on  a profile to prevent users from accessing the application on 
the WAN connection. 
Name:  Type a descriptive name for the application. 
Trigger:  Defines the outgoing communication that determines whet her the user has legitimate access to the application. 
Protocol: Select the protocol TCP or UDP that can...

 
 
 
Enable: Click to enable or disable the DMZ. 
DMZ Host IP: Type a host IP address for the DMZ.  The computer with this IP address acts as a DMZ host with unlimited 
Internet access. 
Apply: Click to save the settings. 
                                                              AirLive WL-1500R User’s Manual 
45  

Firewall Rule 
The firewall rule function enables users to set up the firewall. The WLAN Router provides basic firewall functions, by 
filtering all the packets that enter the WL AN Router using a set of rules. The rules are listed in sequential order--the lower 
the rule number, the higher the priority the rule has. 
 
Figure 58. 
 
Enable:  Click to enable or disable the firewall rule profile. 
Name: Type a descriptive name for the firewall rule profile. 
Action:  Select whether to allow or deny...

Priority Down: Select a rule from the list and click  “Priority Down” to decrease the priority of the rule. 
Update Priority:  After increasing or decreasing the priority of a rule, click  “Update Priority” to save the changes. 
System Setting 
This system setting enables users to change password, set t he device time, view the device information, restart the 
system, save and load different settings as profiles, restore factory default settings, upgrade the firmware, and ping 
remote IP addresses….etc....