Air Live Router WT-2000ARM User Manual

 
AirLive WT-2000ARM User’s Manual 
 46
 Maintenance 
 Administrator 
 
 
 
Parameter Description 
Username  The username of the router is “admin” by default. 
  
New Password  Enter up to 30-digit of the new password. 
  
Confirm Password  Enter the new password again to confirm the setting. 
  
 
 
 
 
 
 
 
 
 
  

 
AirLive WT-2000ARM User’s Manual 
 47
 Time Zone 
The Time Zone allows your router to set its time; this will affect function such as System Log. 
 
 
 
Parameter Description 
Current Date/Time  Show the current date/time of the router. 
  
Synchronize time with  NTP Server Automatically – Set the time by following with a NTP 
Server. 
PC’s Clock – Set the time the same as your computer. 
Manually – Set the time manually. 
  
Time Zone  Select the time zone of the country you are currently in. The...

 
AirLive WT-2000ARM User’s Manual 
 48
 Firmware 
If you have new firmware for some features update, please upgrade firmware of the router here. 
 
 
 
Parameter Description 
New Firmware Location  Type in the location of the new firmware or click “Browse” to find it. 
  
Browse  Click “Browse” to find the new firmware. 
  
Upgrade  Click “Upgrade” to begin the upgrade process. After the router is 
restarted, the process is completed. It might take several minutes, 
dont power off the router during...

 
AirLive WT-2000ARM User’s Manual 
 49
 System Restart 
In this page, you can restart your router or restore to factory defaults. If you wish to restart the router 
using the factory default settings, select “Factory Default Settings” to reset to factory defaults. You can 
also click the “Reset” button in the rear panel of the router over 5 seconds to reset default settings. 
 
 
 
 
 Diagnostics 
This page allows you to diagnose the connectivity of the LAN and WAN network.  
 
  

 
AirLive WT-2000ARM User’s Manual 
 50
 Status 
 Device Info 
In this page, you can know the device information including firmware, MAC Address, LAN and WAN 
settings and also the ADSL line status. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
AirLive WT-2000ARM User’s Manual 
 51
 System Log 
Display system logs accumulated up to the present time. You can also save the logs for future 
reviewing. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
AirLive WT-2000ARM User’s Manual 
 52
 Statistics 
Show the statistics of transmit and receive packets on the LAN port and the ADSL line. 
 
 
 
 
 
  

 
AirLive WT-2000ARM User’s Manual 
 53
Chapter VI: Troubleshooting 
1. The LAN LED on the front panel does not light up. 
 
STEPS CORRECTIVE ACTION 
1  Check the Ethernet cable connections between your ADSL2+ Router and the 
computer or hub.  
2  Check for faulty Ethernet cables. 
3  Make sure your computer’s Ethernet card is working properly. 
4  If these steps fail to correct the problem, contact your local distributor for 
assistance. 
 
2. The ADSL LED on the front panel does not light up. 
 
STEPS...

 
AirLive WT-2000ARM User’s Manual 
 54
 
Step 1: Click “Start” and select “Run”. 
Step 2: Type in “cmd” and click “OK”. 
 
 
Step 3: Type ipconfig /all and click enter. 
 
 
z Your PC’s IP address is 192.168.2.111. 
z The PC’s Subnet Mask is 255.255.255.0. 
z Your PC’s MAC Address is the one entitled Physical Address (00-00-E2-82-C3-AD). 
 
4. I forget my login username and/or password. 
STEPS CORRECTIVE ACTION 
1  If you have changed the password and have now forgotten it, you will need to 
upload the...

 
AirLive WT-2000ARM User’s Manual 
 55
Make sure you store the username and password in a save place. 
5. I cannot access the Web Management of the router after activating the ACL function.  
STEPS CORRECTIVE ACTION 
1  When ACL is activated, you have to set the ACL rule for allowing some users 
to use some services. Check if you have set the rules. If not, all the users are 
forbidden using any of service from LAN or WAN. 
2  If you cannot access the Web Management of the router, please press the...