Aiwa Ht Dv90 Operating Instructions

   ENGLISH  11
En
DISPLAY WINDOW
1Surround playback mode indicators
Indicates the surround output type in which the source actually
being played.
2Main display
Shows general information such as the active function, current
adjustment mode, title/chapter/track number , elapsed time or
radio frequency
3TUNE/MONO/1 indicators
“TUNE” lights up during radio reception.
MONO/1 indicates the type of radio reception.
4Active channel indicators
Lights up to show each speaker channel.
•L (Left front)
•C (Center)
•R...

12 ENGLISH
BEFORE OPERATION
TURNING THE POWER ON
Press POWER 6STANDBY/ON (POWER on the
remote control) to turn the unit on and off.
ADJUSTING VOLUME
Turn VOLUME, or press VOLUME + or - on the
remote control.
The volume level is displayed as a number from MIN(0) to MAX
(80).
The volume level is automatically set to 60 when the power is
turned of f with the volume level set to 61 or higher .
NOTE
• When any one of speaker channel level is set to more than +1
dB (pages 26, 28), the maximum volume level...

   ENGLISH  13
En
This unit can play DVD and audio CDs.
The descriptions in this section apply to all types of discs that
can be played on this unit unless otherwise noted.
BEFORE USE
SUPPORTED DISC FORMATS
This unit can play discs with the following logos.
DVDs
(8 cm disc/12 cm disc)
Audio CDs (CDDA)
(8 cm disc/12 cm disc)
CD-R/RW
(8 cm disc/12 cm disc)
•This unit will play back an MP3-CD. See “DESCRIPTIONS OF
MP3”, page 14.
•This unit will play back a finalized CD-R/R W disc.
However , it may not play...

14 ENGLISH
COPYRIGHT PROTECTION
It is forbidden by law to copy, broadcast, show, broadcast via
cable, play in public, or rent copyright material without permission.
This unit features the copy protection function developed by
Macrovision. Copy protection signals are included in some DVD
discs. If you record such discs on a VCR, picture noise will appear
during recording and playback.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and...

   ENGLISH  15
En
BASIC OPERATIONS
PLAYING A DISC
1To play a DVD, turn on the TV and select the proper
input.
On your  TV, select the input from the VIDEO OUT  jack (or the
S-VIDEO OUT jack, if you are using S-video) of this unit.
2Select DVD/CD function.
Press FUNCTION repeatedly on the main unit or press DVD/
CD on the remote control.
3Press zOPEN/CLOSE to open the disc tray.
4Place a disc with the labeled side up.
5Press zOPEN/CLOSE again to close the disc tray.
“LOADING” is displayed while the player...

16 ENGLISH
DVDs:
Playback starts automatically .
If the menu is displayed, see “USING  THE MENU”, below .
To switch the number between title and chapter , press
SHIFT+TITLE/CHP. With each press, title or chapter is
displayed alternately .
Audio CDs function:
6If playback does not start automatically, press c
to start playback.
To play back DVDs recorded in Dolby Digital or DTS sound
See section “SURROUND PLA YBACK” (pages 24-26).
To play back an MP3 disc
Menu screen (SMAR T NAVI) appears on the  TV...

   ENGLISH  17
En
SELECTING A TRACK
Besides the methods described here, discs can also be searched
by title/chapter (DVDs), track (CDs) or time. See “ON SCREEN
DISPLAY INFORMATION”, page 23.
DIRECTLY SELECTING A TRACK WITH THE
REMOTE CONTROL (CD ONLY)
A track can be selected directly by entering the track number on
the remote control, either during playback or stop.
Press 0-9 to select the desired track.
Example:
To play track 12, press 1, 2.
To play track 20, press 2, 0.
Playback begins at the beginning...

18 ENGLISH
FRAME ADVANCE AND SLOW PLAYBACK
FRAME ADVANCE (DVD ONLY)
1Press a to pause the disc.
2Press a repeatedly to advance frames.
With each press, playback advances one frame.
To return to normal playback
Press c.
NOTE
There is no audio during Frame  Advance.
SLOW PLAYBACK (DVD ONLY)
Press SHIFT+ SLOWG or SLOWF on the remote
control during playback
To change the slow playback speed
With each press, the playback speed changes as follows:
1/2 1/4 1/8
To return to normal playback
Press c.
NOTE
There is...

   ENGLISH  19
En
TV screen:
REPEAT PLAYBACK (CDs)
Press SHIFT+REPEAT repeatedly on the remote
control during playback.
With each press, the Repeat playback mode changes:
ONE: Repeats the current track.
To repeat playback of selected track(s)
Program the track(s) with the programed playback function, and
then press SHIFT+REPEAT to repeat playback of the programed
tracks (see “PROGRAMED PLA YBACK”, below).
REPEAT ONE
REPEAT ALL
REPEAT OFF
PROGRAMED PLAYBACK
(CD ONLY)
You can program up to 32 selected...

20 ENGLISH
1Press SHIFT+RANDOM during stop.
“RANDOM ON” appears on the  TV screen and “RANDOM”
lights up on the unit’ s diaplay .
RANDOM ON
2Press c to start random playback.
To stop random playback
Press s.
To cancel random playback
Press SHIFT+RANDOM again during stop. “RANDOM OFF”
appears on the  TV screen and “RANDOM” disappears and the
unit goes back to normal playback.
NOTE
During random playback you cannot skip back to the previously
played track with r.
RANDOM PLAYBACK (CD ONLY)
All tracks on the...