AL-KO AKS 3004 Replacement Stabiliser Handle User Manual

							PLEASE ENSURE YOU READ THESE INSTRUCTIONS CARE-
FULLY, BEFORE COMMENCING TO OPERATE THIS PRODUCT.
GENERAL:
1) These notes are guidelines for use of the new handle only.  They should 
be read in conjunction with the “Assembly and Operating Instructions”\
 
leaflet, that should have been supplied with your stabiliser.  Please refer to 
this leaflet for full guidance on maintenance/operation and coupling 
procedures for AKS 2004 or AKS 3004.  If you do not have a copy, please 
request the following from our Service Department:
 
a) Operating Instructions for AKS 2004 - Part No. 1385399
b) Operating Instructions for AKS 3004 - Part No. 1387429
2) When not in use (during travelling or storage), the handle MUST be 
removed  from  the  stabiliser  and  stored  within  your  vehicle.    Providing  the 
stabiliser  has  been  coupled  correctly,  the  removal  of  the  handle  from  the 
stabiliser arms will not interfere with the normal operation of the stab\
iliser. 
3) Suitable for AKS 2004/3004 Stabilisers only. 
ASSEMBLY INSTRUCTIONS  FOR  
REPLACEMENT AKS 2004/3004 STABILISER HANDLE
PLEASE ENSURE YOU READ THESE INSTRUCTIONS CARE    
FULLY, BEFORE COMMENCING TO OPERATE THIS PRODUCT.
GENERAL:
1) These notes are guidelines for use of the new handle only.  They should  
be read in conjunction with the “Assembly and Operating Instructions”\
 
leaflet, that should have been supplied with your stabiliser.  Please refer to 
this leaflet for full guidance on maintenance/operation and coupling 
procedures  for AKS  2004  or AKS  3004.    If  you  do  not  have  a  copy,  please 
request the following from our Service Department:
 
a) Operating Instructions for AKS 2004 - Part No. 1385399
b) Operating Instructions for AKS 3004 - Part No. 1387429
2) When not in use (during travelling or storage), the handle MUST be 
removed from the stabiliser and stored within your vehicle.  Providing the sta-
biliser has been coupled correctly, the removal of the handle from the stabiliser 
arms will not interfere with the normal operation of the stabiliser. 
3) Suitable for AKS 2004/3004 Stabilisers only. 
ASSEMBLY INSTRUCTIONS  FOR  
REPLACEMENT AKS 2004/3004 STABILISER HANDLE 
						

							KIT CONTENTS (Fig. 1):
1) Replacement handle
2) Torx spanner
3) Fixing Screw
ASSEMBLY:
1)  Removal of existing red handle from the stabiliser 
lever arms:
a)  using the torx spanner provided, undo and remove the 
fixing  screw  located  on  the  side  of  the  red  handle  (Fig. 
2).
b) the red handle should now pull off the stabiliser lever 
arms (Fig. 3).
2) Fitment of new handle
a) ensure both stabiliser lever arms are level
b) Push the new handle on to the lever arms (Fig. 4).
c)  Insert  fixing  screw  and  tighten  using  the  torx  spanner 
(Fig. 5).
The handle is now ready for use.
Part No: 1552888  Rev 07/09
1)
3)
Fig. 3
AL-KO Kober LtdSouth Warwickshire Business Park, Kineton Road, Southam, Warwickshire, CV47 0AL           Phone: 01926 818500           Fax: 01926 818562                  www.al-ko.co.uk
Fig. 1
2)
Fig. 2
Fig. 4Fig. 4
Fig. 5
KIT CONTENTS (Fig. 1):
1) Replacement handle
2) Torx spanner
3) Fixing Screw
ASSEMBLY:
1)  Removal of existing red handle from the stabiliser 
lever arms:
a)  using the torx spanner provided, undo and remove the 
fixing  screw  located  on  the  side  of  the  red  handle  (Fig. 
2).
b) the red handle should now pull off the stabiliser lever 
arms (Fig. 3).
2) Fitment of new handle
a) ensure both stabiliser lever arms are level
b) Push the new handle on to the lever arms (Fig. 4).
c)  Insert  fixing  screw  and  tighten  using  the  torx  spanner 
(Fig. 5).
The handle is now ready for use.
Part No: 1552888  Rev 07/09
1)
3)
Fig. 3
AL-KO Kober LtdSouth Warwickshire Business Park, Kineton Road, Southam, Warwickshire, CV47 0AL           Phone: 01926 818500            Fax: 01926 818562                  www.al-ko.co.uk
Fig. 1
2)
Fig. 2
Fig. 4Fig. 4
Fig. 5