Home > Alarm Lock > Alarm Lock > Alarm Lock KEYPAD A100 WIRING PROGRAMMING INSTRUCTIONS User Manual

Alarm Lock KEYPAD A100 WIRING PROGRAMMING INSTRUCTIONS User Manual

Add to Favourites
    Download as PDF

    View the Alarm Lock KEYPAD A100 WIRING PROGRAMMING INSTRUCTIONS User Manual for free. All the Alarm Lock manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 1 A-100 INDOOR STAINLESS STEEL KEYPAD WIRING & PROGRAMMING INSTRUCTIONS WI1495 7/06 GENERAL DESCRIPTION The A-100 is a self-contained access control keypad de- signed for indoor basic access applications. Its heavy stainless steel faceplate is designed to mount on a standard single-gang electrical box. The A-100 operates up to three outputs (two relays and 1 open-collector transistor) and can be used to trigger a door strike, an electromagnetic door lock, or any other relay-activated...
    Page 2 2 GETTING STARTED First Time Startup--Self-Test After you unpack the lock from its factory packaging, per- form the initial startup procedure (outlined below). For keypads already in use, this startup procedure can also be used to erase all existing keypad programming and return the keypad back to its original out of box factory default condition. 1. Install the jumper located on the back of the keypad. 2. Apply power (12-24VDC polarized or 12-24VAC) to the power input terminals....
    Page 3 3 2. Press 32# •Green LED blinks once - sounder beeps once. 3. Press new 3-digit User Number and press #. •Green LED blinks once - sounder beeps once. 4. Press new 4-digit User Code and press #. •Green LED blinks once - sounder beeps once. 5. Re-press new 4-digit User Code and press #*. •Green LED lights / sounder beeps for 1 second indi- cating the User Code was added successfully. Delete a User Code 1. If not in already, enter Program Mode. •Orange LED lights - sounder...
    Page 4 4 Be sure to either commit the Master Code to memory or record it in a safe place. If the Master Code is ever lost, the keypad will need to be restarted using the First Time Startup procedure described on page 2. 32 Add (or Edit) a User Code Allows you to add a new or edit an existing User Code. User Codes are 3-6 digit numbers the User presses into the keypad keys to activate one or more Outputs. The A-100 Series keypads can hold up to 150 User Codes in its memory, thus allowing up to...
    Start reading Alarm Lock KEYPAD A100 WIRING PROGRAMMING INSTRUCTIONS User Manual

    Related Manuals for Alarm Lock KEYPAD A100 WIRING PROGRAMMING INSTRUCTIONS User Manual

    All Alarm Lock manuals