Alarm Lock New KEY LOGGING FeatureWiring Instructions User Manual
Have a look at the manual Alarm Lock New KEY LOGGING FeatureWiring Instructions User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 84 Alarm Lock manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ADDENDUM NEW KEY LOGGING FEATURE WI1587 1/07 The new Key Logging feature creates an entry in the Audit Log when a conventional key is used for entry. Two sample log entries are shown below, one printed, the other as displayed in DL-Windows. To enable Key Logging, simply connect the wires as shown in the images at the bottom. 345 Bayview Avenue Amityville, New York 11701 For Sales and Repairs 1-800-ALA-LOCK For Technical Service 1-800-645-9440 Publicly traded on NASDAQ Symbol: NSSC © ALARM LOCK 2007 HOW TO ROUTE AND CONNECT THE WIRES 1. Route wires through door as shown. The cylinder housing has two terminal housings, and each housing contains two wires -- one housing contains red/black wires, the other black/black. ------- AUDIT LOG ------- 01/16/07 13:06:35 Tue 13:01:59 001 PROGRAM 56 13:01:29 001 PROGRAM 57 13:00:53 001 ENTRY 13:00:26 013 ENTRY 13:00:17 KEY ENTRY 13:00:03 012 ENTRY 12:56:27 001 PROGRAM 2 12:56:27 001 PROGRAM 40 12:56:04 001 PROGRAM 39 12:55:00 NEW CLCK TIME 12:01:39 OLD CLCK TIME 12:00:45 RAM TEST:PASS 12:00:45 POWER UP ------------------------- End of Audit Log Sample log entry printed by the AL- IR1 infrared printer. Sample log entry as displayed by DL-Windows (v3.6.0 or later). Be sure two wires are side-by-side and do not overlap 2. After installing the inside housing, be certain wires are not pinched between the housing and the mounting plate. Hold-down clamp 3. Plug in each pair of connectors. Verify that the wire colors in each pair of female and male terminal housings are the same -- red/black to red/black and black/black to black/black. Red/Black to Red/Black Black/Black to Black/Black Red/ black wires Black/ black wires