Alarm Lock Panic Exit Devic 788 Monitoring Function Instructions Model 250 700 User Manual

							 
The 788 monitoring function consists of a reed switch in our 730 keeper and an activating magnet in the locks 
deadbolt.  The 730 keeper has a pair of flying leads that provide normally closed dry contacts when the door 
is closed and the deadbolt is locked.   
 
INSTALLATION 
 
Follow the normal instructions for mounting the keeper with the following exception:  Drill a 1/4 hole into the 
hollow metal door frame for the keepers flying leads to run through. 
 
WIRING 
 
When using Alarm Locks remote monitor, one keeper wire is connected to the ground terminal and the other 
wire is simultaneously connected to the tone and lamp terminals. 
 
OPERATION 
 
When the door is closed and the deadbolt locked, the monitor will report a secure condition.  Unlocking the 
deadbolt by depressing the pushbar (causing an alarm) or using a key will cause a break in the loop to the re-
mote monitor.  The monitor will simultaneously turn on the buzzer and light the lamp associated with that 
door.  The tone may be reset at the monitor at once in order to continue monitoring other locks.  The lamp 
may be reset only after the deadbolt is projected by the key. 
788 MONITORING FUNCTION INSTRUCTIONS 
MODEL 250 / 700 SERIES 
P5401  12/04 
345 Bayview Avenue 
Amityville, New York 11701 
For Sales and Repairs 1-800-ALA-LOCK 
For Technical Service 1-800-645-9440 
 Publicly traded on NASDAQ             Symbol: NSSC © ALARM LOCK 2004 
MODEL 700 
MODEL 250