Aleratec 111 HDD Copy Cruiser HighSpeed WL User Guide

www.aleratec.com15
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Copy+Compare
The “Copy+Compare” function performs a copy and compare from a source HDD to 
one or more target HDDs. The target HDDs must be at least as large as the source. The 
HDD Copy Cruiser High-Speed WL will copy every block of capacity on the source 
HDD. 
1. Load the source HDD and the target HDDs into the HDD Copy Cruiser High-
Speed WL. The system will auto-detect the hard drives. After the drives have 
been detected, a...

www.aleratec.com16
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Copy+Compare - Continued
3. During the copy process the HDD Copy Cruiser High-Speed WL will display 
progress information.
 
 
 
 
 
 
 
The amount of data remaining to be transferred (shown in gigabytes), and time 
will be displayed as the percentage of completion increases. 
Note: The copying speed, capacity and duration may vary from one source hard drive to another. 
4. Once duplication is complete, a job status screen will be...

www.aleratec.com17
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Overwrite
The “Overwrite” function will sanitize (wipe clean of all data) the hard disk drives 
connected to the HDD Copy Cruiser High-Speed WL. 
1. Load up to 11 HDDs into the HDD Copy Cruiser High-Speed WL. The system 
will auto-detect the hard drives. Using the arrow buttons (or) select 
“Overwrite”. The following screen will be displayed. 
Note: Overwriting the entire capacity of all connected hard drives can take an extended...

www.aleratec.com18
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Overwrite
 A.			Quick	Overwrite	-	Continued
A3. The estimated time elapsed for the Quick Overwrite process will be displayed. 
        A4.  When the process is finished, the following screen will be shown. 
 
 
 
 
B.			Full	Overwrite
B1. To perform a Full Overwrite, scroll to “Full Overwrite” and press OK. The 
following screen will be displayed. 
B2. The loading pattern process for the Full Overwrite will be displayed. 
B3. The...

www.aleratec.com19
Using the HDD Copy Cruiser High-Speed WL 
B.			Full	Overwrite	-	Continued
 
       B4. When the process is finished, the following screen will be shown.
 
 
 
 
 
 
Main Menu
Overwrite 
C.			3-Pass
C1. To perform a 3-Pass Overwrite, scroll to “3-Pass” and press OK. The 
following screen will be displayed. 
C2. The loading pattern process for the 3-Pass Overwrite will be displayed. 
C3. The estimated time elapsed for the 3-Pass Overwrite process will be displayed. 
 
C4. When the...

www.aleratec.com20
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Overwrite 
D.			3-Pass	+	Verify
D1. To perform a 3-Pass Overwrite + Verify, scroll to “3-Pass Overwrite + 
Verify” and press OK. The following screen will be displayed. 
D2. The loading pattern process for the 3-Pass Overwrite + Verify will be 
displayed. 
D3. The estimated time elapsed for the 3-Pass Overwrite + Verify process will be 
displayed. 
   
D4. When the process is finished, the following screen will be shown. 

ESC
OK[...

www.aleratec.com21
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Overwrite 
E.			7-Pass	Overwrite
This method will write over the entire capacity of the hard drives connected to the 
HDD Copy Cruiser High-Speed WL seven different times.  
DoD 5220.22M is the Department of Defense document that discusses both Three 
and Seven Pass Overwrite data wiping.  
E1. To perform a Seven Pass Overwrite, scroll to “7-Pass Overwrite” and press 
OK. The following screen will be displayed. 
E2. The loading...

www.aleratec.com22
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Overwrite 
F.			Secure	Erase	
The “Secure Erase” function will sanitize (wipe clean of all data) the hard disk 
drives connected to the HDD Copy Cruiser High-Speed WL using algorithms pro-
grammed by the hard drive manufacturer.  Since this function is native to the hard 
drive, it is very fast and reliable.  Almost all modern SATA hard drives support this 
feature.  In the rare case that Secure Erase is not supported, please use the...

www.aleratec.com23
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Utility - Show HDD Info
This function will display information about the hard drives inserted into the unit. 
You may use the arrow buttons to select hard drives loaded into different bays.
1. With the source and target HDDs loaded use the arrow buttons (or) to 
select “Utility”. The following screen will be displayed. 
 
2. Press OK to select. The following information will be displayed.
 
3. To display the information about the...

www.aleratec.com24
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Utility - Update System
Before attempting to use this feature, please contact Aleratec Support.
1. Use the arrow buttons (or) to select “Utility”. The following screen will be 
displayed. 
 
2. Press OK to select. The following information will be displayed.
3. Use the arrow buttons to scroll between the types of utilities: Update BIOS and 
Create Update HDD.  
 A.			Update	BIOS		
Before attempting to use this feature, please...