Aleratec 111 HDD Copy Cruiser HighSpeed WL User Guide

www.aleratec.com25
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Utility - Update System
 B.			Create	Update	HDD			
For technical support use only.
B1. To create an Update HDD, select “Create Update HDD” and press OK. 
 
B2. The following information will be displayed. Press OK	to confirm.  
B3. The following information will be displayed. 
 
B4. The formatting is now complete. 

ESC
OK[ Update System ] 
2. Create Update HDD

ESC
OKDo FORMAT HDD#1
Confirm?

ESC
OKFormat HDD

ESC
OKFORMAT...

www.aleratec.com26
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Utility - System Info
This function will help you give more technical information sometimes required by 
technical support.
1. Use the arrow buttons (or) to select “Utility”. The following screen will be 
displayed. 
 
2. Press OK to select. The following information will be displayed.
 
 
 
 
 
 
3. Use the arrow buttons (or) to select “System Info” and press OK.
 
4. The following information will be displayed. 

ESC...

www.aleratec.com27
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup
The “Setup” menu contains configuration options for the HDD Copy Cruiser High-
Speed WL. It is suggested to use the factory defaults for optimum performance. 
1. Use the arrow buttons (or) to select “Setup”. Press OK to select. The 
following screen will be displayed. 
 
2. Use the arrow buttons to scroll between the types of Setup functions: Copy 
Area, Skip Error, Erase Master, Unknown Format, Transfer Rate, Buzzer,...

www.aleratec.com28
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup - Copy Area
This function specifies which data is to be copied from the Source hard drive.
1. In the Setup menu, use the arrow buttons (or) to select “Copy Area”. The 
following screen will be displayed. 
 
2. Press OK to select. Use the arrow buttons to scroll between the types of 
functions within the Copy Area menu: System and Files, ALL Partitions, Whole 
HDD, and Percentage.  
3.	 System	and	Files: This function will copy...

www.aleratec.com29
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup - Copy Area	-	Continued
6. The following information will be displayed.
 
Setup - Skip Error
This function will set the duplicator to be able to overwrite the source drive when 
preforming any overwrite function.
1. In the Setup menu, use the arrow buttons (or) to select “Skip Error”. 
The following screen will be displayed. Press OK to select.
 
 
 
 
 
 
2. The following information will be displayed.

ESC
OK[ 6. Setup ]...

www.aleratec.com30
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup - Erase Master
This function controls whether the hard disk drive inserted into the Source bay may 
be altered by an overwrite or Secure Erase.
1. In the Setup menu, use the arrow buttons (or) to select “Erase Master”. 
The following screen will be displayed. 
 
2. Press OK to select. Use the arrow buttons to scroll between Enable or Disable 
options.  
 
 
 
 
 
 
 
 
 
 
 
 
3. Press OK to Enable or Disable the erasing of...

www.aleratec.com31
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup - Unknown Format
This function will allow you to copy non standard formatted HDD.
1. In the Setup menu, use the arrow buttons (or) to select “Unknown 
Format”. The following screen will be displayed. 
 
2. Press OK to select. Use the arrow buttons to scroll between the Copy Unknown 
or Skip Unknown options.  
 
 
 
 
 
 
 
 
 
 
 
 
 
3. Press OK to Copy Unknown or Skip Unknown when formatting hard drives.
 

ESC
OK[ 6....

www.aleratec.com32
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup - Transfer Rate
This function will allow you to view and set the trasnfer rate of your drives.
1. In the Setup menu, use the arrow buttons (or) to select “Transfer Rate”. 
The following screen will be displayed. 
 
2. Press OK to select. The following information will be displayed.
 
 
 
 
 
 
3. Use the arrow buttons () to toggle through the available options. Once you 
change a configuration option, remember to press OK to...

www.aleratec.com33
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup - Buzzer
This function controls whether the systems built-in buzzer enabled (turned on) or 
disabled (muted).
1. In the Setup menu, use the arrow buttons (or) to select “Buzzer”. The 
following screen will be displayed. 
 
2. Press OK to select. Use the arrow buttons to scroll between the Turn On and 
Mute options.  
 
 
 
 
 
 
 
 
 
 
 
 
3. Press OK to turn on or mute the buzzer sound.
 

ESC
OK[ 6. Setup ] 
6. Buzzer
...

www.aleratec.com34
Using the HDD Copy Cruiser High-Speed WL 
Main Menu
Setup - Language
This option allows you to select the language that is used for the display. 
1. Use the arrow buttons (or) select “Language”. The following screen 
will be displayed.  
2. Press OK to display the current language selection (the default language is 
English).  
3. Use the arrow buttons () to toggle through the available options. Once 
you change a configuration option, remember to press OK to save it.

ESC
OK[ 6....