Aleratec 122 USB Copy Cruiser Mini USB Flash Drive Duplicator User Guide

www.aleratec.com7
Using the USB Duplication Suite Software
Destination Tab
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Drive List: The drive list will list all drives that are recognized by the 
computer. Each drive may be selected or deselected individually by 
clicking on the check box next to the corresponding drive letter or USB 
port number (See Port Training). The checked drives are the target 
drives that will be operated on when the Start button is clicked. Select 
the target drives carefully before...

www.aleratec.com8
Using the USB Duplication Suite Software
Destination Tab
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4. Rounds: The rounds box allows you to specify how many rounds of the 
selected job type you would like to conduct.
5. Output Window: The output window displays job status updates while 
jobs are running or when they have completed.
6. Completed: The Completed box displays the total number of drives 
that have been completed for the current job. For jobs with more than 
one round, the completed...

www.aleratec.com9
Using the USB Duplication Suite Software
Data Copy Only
Use this function to copy files or folders to one or more USB flash drive(s). 
This function will overwrite any files/folders on the target drive(s) with the 
same name as the source files/folders.
1. Start by choosing Data Copy Only from the drop down menu located 
on the “Source” tab.
 
 
 
 
2. On the “Source” tab, click “Add Files” to copy individual files or “Add 
Folder” to copy an entire folder. You may add both files and...

www.aleratec.com10
Using the USB Duplication Suite Software
Format (FAT, FAT32, NTFS)
There are three format options available in the USB Duplication Suite. 
Format FAT, Format FAT32, and Format NTFS. Each option will format the 
selected drives and if specified apply a volume label. 
By default a quick format will be run. However if you wish to perform a 
full format, you must check the “Full Format” box after selecting one of the 
three formats.
1. Start by selecting one of the three formats “Format...

www.aleratec.com11
Using the USB Duplication Suite Software
Format (FAT, FAT32, NTFS) - continued 
5. You can specify a volume label which will be applied to all drives in 
the text box under “Enter Label” which is found in the Destination tab.
 I. Note: FAT and FAT32 file systems have restrictions on volume 
labels which allow for up to 11 characters, not including the following 
special characters * ? . , ; : / \ | + = < > [ ]
 II. NTFS file systems allow up to 32 characters for a volume label and...

www.aleratec.com12
Using the USB Duplication Suite Software
Format Then Data Copy (FAT, FAT32, NTFS)
The Format Then Data Copy function allows you to perform both a format 
and data copy in the same job process. All selected drives will be formatted 
with the file system you selected. Once the format is complete, the data 
copy process will start automatically.
There are three format options available in the USB Duplication Suite. 
Format FAT, Format FAT32, and Format NTFS. Each option will format the...

www.aleratec.com13
Using the USB Duplication Suite Software
Format Then Data Copy (FAT, FAT32, NTFS) - continued 
2. A new window will appear. Here you must select one of the three 
formats “Format FAT”, “Format FAT32”, or “Format NTFS” by 
clicking on its associated radio button. Once the format selection has 
been made, press OK.
3. If a Full format is desired, check the box labeled Full Format to the 
right of the drop down menu.
4. Because a data copy is involved in this job function, you may also...

www.aleratec.com14
Using the USB Duplication Suite Software
Format Then Data Copy (FAT, FAT32, NTFS) - continued
10. Specify the number of rounds you would like to conduct. (For multiple 
rounds: when the first round is finished you will be prompted to remove 
completed drives and insert the new drives before pressing OK to 
continue).
11. Press the Start button to start the format and data copy process. Check the 
Output window for job status updates. 
 
NOTE: If Full Format is selected, the formatting...

www.aleratec.com15
Using the USB Duplication Suite Software
Create Image File
Use this function to create an image file from a single USB flash drive. The 
create image file supports creating images of bootable media which may 
then be copied using the Clone Image file job function. 
1. From the drop down menu choose “Create Image File”. A new window 
will open.
2. The drop down list will show all available drives. Select the drive you 
would like to create an image of.
3. You may modify the file name of...

www.aleratec.com16
Using the USB Duplication Suite Software
Clone Image File
Use this function to clone an image to one or more drives. The clone image 
file supports cloning images of bootable media that have been created using 
the “Create Image File” function of the USB Duplication Suite. 
1. From the drop down menu choose “Clone Image File”. A new window 
will open.
2. To select the image file that will be cloned. Click the “Browse” button 
and select an .img file.
3. Next, select the drives that the...