Home > AllTrade > Nailer > AllTrade Snapon Round Head Framing Nailer 870010 User Manual

AllTrade Snapon Round Head Framing Nailer 870010 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual AllTrade Snapon Round Head Framing Nailer 870010 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 102 AllTrade manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							PARTS DIAGRAM
    PROBLEM POSSIBLE CAUSE SOLUTION
    19
    20
    Weak drive. Slow to
    cycle between nailings.
    Ensure proper air pres-
    sure is being used.
    Inspect for worn driver
    blade.
    Inspect piston O-ring for
    wear or damage.
    Increase air pressure, 
    Do not exceed 120 psig
    (8.3 bars, 8.5 kg/cm
    2)
    Contact Customer
    Service.
    Nails driven too deep.
    Check air pressure.
    Reduce air pressure.
    Round head nailer feeds
    intermittently or skips
    nails.
    Ensure correct nails are
    being used.
    Inspect nail feeder
    mechanism.
    Ribbon spring weakened
    or damaged.
    Piston O-ring damaged
    or worn
    Nail feeder worn or
    damaged.
    Use ONLY recommend-
    ed nails.
    Clean and lubricate nail
    feeder.
    Replace ribbon spring.
    Use recommended
    pneumatic tool oil.
    Contact Customer
    Service.
    Replace nail feeder.
    Nails jam or driven nail
    is bent.
    Ensure correct nails are
    being used.
    Inspect for worn driver
    blade.
    Nail feeder worn or
    damaged.
    Use ONLY recommend-
    ed nails.
    Contact Customer
    Service.
    Replace nail feeder.
    Drives nails properly
    during normal nailing
    operations, but fails to
    drive nails fully at faster
    operating speeds.
    Check inside diameter of
    air hose.
    Switch to air hose with
    larger inside diameter. 
    						
    							PARTS LIST
    ITEM NO. PART NO. DESCRIPTION
    22
    PARTS DIAGRAM
    21
    1
    K0300-4011
    Top Cap Set
    2
    A0000-0421
    Nylon Screw M6*18
    3
    A0005-1071
    Washer
    4
    A0304-0521
    Exhaust Cover
    5
    A0000-0171
    Screw M6*30
    6
    A0200-0811
    O-Ring 11.8*1.5
    7
    A0005-0541
    Washer 12.5*1.6T
    8
    A0203-0111
    Muffler
    9
    K0300-4021
    Top Cap & Screw Set
    10
    A0003-0331
    Screw
    11
    A0301-1641
    Cap, Top
    12
    A0317-0001
    Wear Ring
    13
    A0100-1971
    Spring
    14
    K0300-2741
    Firing Valve Set
    15
    A0200-2612
    O-Ring 39.4*3.2
    16
    A0200-3211
    O-Ring 59.4*3.1
    17
    A0308-0491
    Firing Valve
    18
    A0313-0281
    Seal Firing Valve
    19
    A0005-0551
    Washer Support
    20
    A0313-0121
    Piston Retainer
    21
    K0600-3971
    Piston Unit
    22
    A0200-1962
    O-Ring 47.3*3.5
    23
    K0600-3961
    Piston Set
    24
    A0305-0131
    Collar 
    						
    							ITEM NO. PART NO. DESCRIPTION
    ITEM NO. PART NO. DESCRIPTION
    23
    50
    A0004-0021
    Nylon Nut M5
    51
    A0401-2031
    Body
    52
    A0200-4311
    O-Ring 53.6*2.62
    53
    A0203-0191
    Filter
    54
    A0011-0161
    Spring Pin 3*24
    55
    A0306-1201
    Tail Cover
    56
    K0500-1501
    Trigger Set
    57
    K1100-2411
    Magazine Set
    58
    A0706-1351
    Support
    59
    A0708-0381
    Steel Bar
    60
    A0713-0332
    Insert
    61
    A0000-0681
    BHSC Screw M5*10
    62
    A0000-0061
    Screw M5*12
    63
    K0700-4731
    Magazine Set
    64
    A0003-0231
    Rivet
    65
    A0003-0221
    Rivet
    66
    A0718-0561
    Magazine Cover
    67
    A0105-0191
    Nail Detainer
    68
    A0701-2421
    Rail Magazine
    69
    K0700-4761
    Pusher Assembly
    70
    A0102-0071
    Spring
    71
    A0703-0151
    Roller, Negator Spring
    72
    A0005-0311
    Pin Retainer 5.5*2
    73
    A0707-1721
    Feeder Clip
    74
    A0100-1081
    Spring
    25
    A0311-0351
    Sleeve Hold Down
    26
    A0200-2002
    O-Ring 85*3.5
    27
    A0800-0781
    Spacer
    28
    A0303-0811
    Cylinder
    29
    A0200-1852
    O-Ring 57.5*3.3
    30
    A0200-3221
    O-Ring 58*2.5
    31
    A0205-0411
    Gasket
    32
    K0500-0901
    Trigger Valve Set
    33
    A0204-1671
    Grip
    34
    A0316-0341
    Hook
    35
    A0706-1711
    Support
    36
    A0000-0351
    Screw M3*8
    37
    A0011-0171
    Spring Pin 3*16
    38
    A0100-1051
    Outlet Spring
    39
    A0000-1791
    Nylon Screw M5*28
    40
    A0005-0531
    Washer 14*1T
    41
    A0719-1121
    Hook Fixer
    42
    A0005-0131
    E-Ring 4
    43
    A0011-0091
    Spring Pin 3*20
    44
    A0712-1181
    Release Guide
    45
    A0313-0651
    Main Body Bumper
    46
    A0011-0201
    Sping Pin 3*30
    47
    A0009-0011
    Steel Ball
    48
    A0100-1961
    Spring
    49
    B0000-0351
    Lock Pin Set
    24 
    						
    							1 YEAR LIMITED WARRANTY
    Express and Exclusive Limited Warranty to Original Retail Buyer
    Alltrade Tools LLC (hereinafter Alltrade) expressly warrants to the original retail
    purchaser of the accompanying SNAP-ON™ portable air tool and no one else all
    parts of the product (except those parts referred to below which are specifically
    excluded from such warranty (see Exclusions) to be free from defects in materials
    and workmanship for a period of one year from the original date of purchase.
    The date of purchase shall be the date of shipment to the original purchaser, or the
    date the original purchaser took possession, custody, or control of the product,
    whichever occurred first. This warranty shall be null and void if the product or any
    component thereof is modified or altered. This warranty does not apply to any other
    product and/or component thereof manufactured or distributed by Alltrade, and
    does not apply to products and/or components thereof designed, manufactured
    and/or assembled by others, for which Alltrade makes no warranties whatsoever.
    THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THE DESCRIPTION ON
    THE FACE HEREOF.
    WARRANTY PERFORMANCE
    By purchasing this product, purchaser expressly acknowledges and agrees that
    their sole and exclusive remedy under this warranty shall be strictly limited to the
    repair or replacement of any covered nonconforming items or parts thereof provid-
    ed that any such nonconforming item and/or part is promptly returned to an author-
    ized Service Center within the applicable warranty period, with a written request by
    purchaser to repair and/or replace the nonconforming item and/or part. We recom-
    mend that you keep the original product packaging in the event you need to ship the
    unit. We suggest the package be insured against loss or in transit damage. When
    sending your product, include your name, address, phone number, e-mail address,
    dated proof of purchase (or copy) and a statement about the nature of the problem.
    Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate
    written proof that they are the original purchaser and of the original purchase date.
    Parts returned, freight prepaid and insured, will be inspected and, at Alltrades
    option, repaired and/or replaced free of charge if it is found to be defective and sub-
    ject to warranty. Alltrade retains the sole discretion to determine whether any item
    or part is nonconforming and, if so, whether the item and/or part will be repaired
    and/or replaced. If the unit is repaired, new or reconditioned replacement parts may
    be used. If Alltrade chooses to replace the product, it may replace it with a new or
    reconditioned of the same or comparable design. The repaired or replaced unit will
    be warranted under the terms of the remainder of the one year warranty period; cov-
    ered defective parts not subject to normal wear and tear or other exclusions will be
    repaired or replaced, at Alltrades option. During the warranty period, Alltrade will
    be responsible for the return shipping charges. Alltrades repair and/or replacement
    of any nonconforming item and/or part thereof shall constitute fulfillment of all obli-
    26
    ITEM NO. PART NO. DESCRIPTION
    SPECIFICATIONS
    75
    A0006-1351
    Pin
    76
    A0011-0201
    Pusher Set
    77
    A0000-0411
    Nylon Screw M5*20
    78
    A0712-1151
    Catch Cover
    79
    A0201-0122
    Bushing
    80
    A0711-2011
    Lower Safety B
    81
    A0711-2001
    Lower Safety A
    82
    A0204-1081
    No Mar Pad
    83
    A0106-0101
    Spring Clip
    84
    A0200-1101
    O-Ring 7*2
    85
    A0200-0791
    O-Ring 63.9*2.5
    86
    A0309-0731
    Bumper
    87
    A0100-2151
    Spring
    88
    A0713-0341
    Feeder Shoe Stop
    89
    A0000-0891
    Screw M8*25
    90
    K0700-5471
    Outlet Site Assembly
    MODEL NUMBER
    870010
    AIR PRESSURE
    70-120 PSIG (5.0- 8.5 kg/cm
    2G)
    NAIL LENGTH
    2 (50.8 mm) - 3 1/2 (88.9 mm)
    COLLATION ANGLE
    21°
    MINIMUM HOSE
    DIAMETER
    1/4 (6.5 mm)
    NET WEIGHT
    7.6 LBS. (3.4 KG)
    25 
    						
    							WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR
    CAUSE OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS
    SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.
    EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE
    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE WARRANTY
    LISTED HEREIN IS MADE WITH REGARD TO THIS PRODUCT. ALL WARRANTIES
    AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY
    ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANU-
    FACTURE, PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COM-
    PONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH
    WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES
    BY OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF
    ALLTRADE AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND
    WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS
    AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON.
    PURCHASERS SOLE AND EXCLUSIVE REMEDY IS AS STATED ON PRECEDING
    PAGES.
    LIMITATIONS OF LIABILITY
    IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR
    INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY
    KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH
    OR PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS REPRE-
    SENTATIVE(S) AND PURCHASER, AND WARRANTY HEREUNDER, AND/OR THE
    EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF
    ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS REPRESENTA-
    TIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO
    EVENT, WHETHER BECAUSE OF A BREACH OF CONTRACT, WARRANTY, TORT
    (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALLTRADES AND/OR ITS
    REPRESENTATIVE (S) LIABILITY EXCEED THE PRICE OF THE PRODUCT. All LIA-
    BILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON
    THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE.
    LIMITATIONS ON WARRANTY DISCLAIMERS
    Some states do not allow limitations on how long an implied warranty lasts and
    some states do not allow the exclusion or limitation of the incidental or consequen-
    tial damages, so part or all of the above limitations or exclusions may not apply to
    you. This warranty gives you specific legal rights, and you may also have other
    rights, which vary from state to state.
    If your product is not covered by this warranty, please call our Customer Service
    Department at 1-888-278-8092 for general repair information, and charges and the
    28
    gations to the purchaser. Alltrade shall not be responsible or liable for any expense,
    including freight charges, or repairs made outside Alltrades facility or an Alltrade
    designated service, unless expressly agreed to by Alltrade in writing. Under no cir-
    cumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or
    rental, inconvenience, commercial loss, or consequential damages.
    For the location of an Authorized Service Center nearest you, please call customer
    service at 1-888-278-8092.
    EXCLUSIONS
    Air nailers and staplers need periodic maintenance to remain in proper operating
    condition.  Normal wear parts (o-rings and driver blades) shall be warranted to the
    original purchaser to be free from defects in materials and workmanship for a peri-
    od of 90 days from the original date of purchase.
    This warranty does not cover parts damaged due to normal wear, abnormal condi-
    tions, misapplication, misuse, abuse, accidents, operation, improper storage, or
    freight damage. Parts damaged or worn by operation in dusty environments are not
    warranted. Failure to follow recommended operating and maintenance procedures
    also voids warranty.
    DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,
    NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS
    OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, USE
    OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, OR OTHER
    CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE
    NOT COVERED BY THIS WARRANTY.
    Alltrade will not be liable for the following: labor charges, loss or damage resulting
    from improper operation, maintenance or repairs made by other persons; pre-deliv-
    ery services such as assembly, oil and lubricants, and adjustment; maintenance
    services that are normally required to maintain the product.
    The use of other than genuine Snap-On™ Repair Parts will VOID the warranty.
    WARRANTY DISCLAIMERS
    EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUAR-
    ANTIES AND/OR REPRESENTATIONS, EXCEPT FOR THE LIMITED WARRANTY
    PROVIDED HEREIN, ALL OTHER EXPRESS WARRANTIES, GUARANTIES, AND/OR
    REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE(S) REGARDING
    THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE
    PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF
    WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,
    WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY
    ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE
    BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE
    AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY
    27 
    						
    All AllTrade manuals Comments (0)

    Related Manuals for AllTrade Snapon Round Head Framing Nailer 870010 User Manual