Alpha Tool.Com.HK Limited Beveling Auxiliary Base User Manual

							Part No: BAB1590 Version 2
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
Alpha® 
Beveling Auxiliar y Base  Instruction Manual
MANUAL  
						

							2
TABle of CoNTeNTs
Introduction ........................................................................\
........................................................... 3
  About The symbols ........................................................................\
.............................. 3
  Precautions for Using Beveling Auxiliary Base ....................................................... 3
Alpha
® Beveling Auxiliary Base overview for 15~45° Angle .................................................... 4
	 Specifications ........................................................................\
....................................... 4
Alpha
® Beveling Auxiliary Base overview for 90° Angle .......................................................... 5
 features   ........................................................................\
............................................... 5
Accessories ........................................................................\
.......................................................... 6
 Components ........................................................................\
......................................... 6
Attaching Clamping Base for 15-45° Angle ........................................................................\
...... 7
Attaching Clamping Base for 90° Angle ........................................................................\
............ 7
Attaching The Universal Adapter ........................................................................\
........................ 9
Attaching Grinder/Polisher To Main Base ........................................................................\
........ 10
Installing Grinder/Polisher Accessories ........................................................................\
........... 11
Attaching Beveling Base To Workpiece ........................................................................\
........... 11
Bevel Grinding/Polishing (15- 45°) ........................................................................\
................... 13
straight edge Grinding (90°) Using “straight edge Guide”. .................................................. 14
straight edge Polishing (90°) Using “straight edge Guide”. ................................................. 15
straight edge Preparation for seamless Countertops (90 °) ..................................................16
Alpha
® Beveling Auxiliary Base schematic ........................................................................\
..... 17
Alpha
® Beveling Auxiliary Base Parts list ........................................................................\
....... 18
Appendix ........................................................................\
............................................................. 19  
						

							3
INTrodUCTIoN
Thank you for purchasing the Alpha® Beveling Auxiliary Base.  To ensure correct use, read 
this Instruction Manual and the Instruction Manual for the power tool an\
d follow the operat-
ing instructions.  Keep this manual in a place where operators can acces\
s it easily whenever 
necessary!
 ABoUT The syMBols
According	to	the	hazard	level,	all	safety	notes	in	this	manual	are	classified	into	“DANGER”,		
“WArNING”, and “CAUTIoN”.
  dANGer!  death or serious personal injury is imminent when handling this  polisher incorrectly.
  WArNING!  There is a possibility of death or serious personal injury when 
handling this polisher incorrectly. 
  CAUTIoN!  There is a possibility of personal injury or property damage when 
handling this polisher incorrectly.
Note:    In some situations, failing to observe WArNING notes could result in death or 
serious personal injury.  Be sure to read and observe the safety notes to ensure safety and 
correct use of the beveling base.  
 PreCAUTIoNs for UsING BeVelING  AUxIlIAry BAse
Although the rollers for the base are made of nylon, it is possible that\
 they may cause minor 
scratches on the surface of granite. To prevent that from occurring, we recommend that the 
polished surface be covered with masking tape before using this product.\
   
						

							4
AlPhA® BeVelING AUxIlIAry BAse oVer VIeW
  sPeCIfICATIoNs 
•	Beveling Angle :  15 ~ 45°
•	 Beveling depth :  3/8” (10mm Max)
•	 straight Angle :    90°
•	 Max. Pad size :     4” (100mm)
•	 spindle :                5/8”-11
•	 Weight :                 3.57 lbs. (1.62 kgs)
(clamping BaSE for 15-45° anglE)
figure-1   
						

							5
AlPhA® BeVelING AUxIlIAry BAse oVer VIeW 
  feATUres 
•	simple operation
•	 Perfect finishing
•	 Time saving
•	 Adjust the desirable bevel angle from 15 ~ 45°
•	 Adjust the beveling depth from 0.1~10 mm
•	 Micrometric scale to calibrate the chamfering depth
•	 8 rolling wheels to facilitate moving.
•	 Designed	to	fit	various	sanders/polishers/grinders,	simply	by	changing	the	clamp.
•	 Quickly change the abrasive / polishing pad while working.
(clamping BaSE for 90° anglE)
figure-2   
						

							6
ACCessorIes
  CoMPoNeNTs
 
1. Universal Adapter Assembly ........................................................................\
.......... 1 set
2.  Clamping Base for 15~45° Angle ........................................................................\
... 1 pc
3.  screws ........................................................................\
.............................................. 2 pcs
4.  Clamping Base for 90°
 Angle ........................................................................\
......... 1 pc
5.  Water hose  ........................................................................\
....................................... 1 pc
6.  Water Valve ........................................................................\
...................................... 1 pc
7.  Water hose Assembly (3M) ........................................................................\
............. 1 set
8.  hex. Wrench (5mm) ........................................................................\
......................... 1 pc
9.  spanner ........................................................................\
............................................ 1 pc
figure-3   
						

							7
ATTAChING ClAMPING BAse for 15~45° ANGle
ATTAChING ClAMPING BAse for 90 ° ANGle
1. remove support Assy. and two screws.
Clamping Base for 15~45° Angle
support Assy.
figure-4
figure-5  
						

							8
2. set to 45°.
3.  Attach 90° Clamping Base to Main Base.
Clamping Base for 90° Angle
figure-6
figure-7
ATTAChING ClAMPING BAse for 90 ° ANGle (CoNT’d)   
						

							9
ATTAChING The UNIVersAl AdAPTer
2. Attach to Clamping base for 90° Angle.
1. Attach to Clamping base for 15~45° Angle.
figure-8
figure-9   
						

							10
ATTAChING GrINder/PolIsher To MAIN BAse
1. Push spindle lock and turn spindle of the Universal Adapter.
2.  Tighten using spanner.
spindle lock
spanner 17mm
figure-9
figure-10