Alpha Tool.Com.HK Limited Ecoguard Type G ver 3 User Manual

11
GRINDING aPPlICatIONS
 SuRfaCE GRINDING
 
Securely 

connect the  f lexible Connector 
h
 ose to the Dust Collection Cover.  
turn 
Grinder and V

acuum on to start grinding application.
use 

the  a
lpha® Rubber hose C onnector as a joint between duct and  flexible  
Connector 
h
ose.
Rubber hose Connector Duct
f
 lexible Connector  h ose
Stainless Steel hose band
(fig.7)   

12
half CoverSub Cover
 Wall 
GRINDING
1.

  l
oosen the screws and remove the Sub Cover and  h alf Cover.
2.
 
Switch the position of the Sub Cover and 
 h alf Cover.
3.
  t
ighten screws.
half Cover Screw M4 x 10
Sub Cover
(fig.8)
( f ig.9)  

13
attaChING thE DuSt COllECtOR
1. Securely connect f lexible Connector  h ose to the duct of the grinder, then turn 
Grinder and Vacuum Cleaner on to start grinding application.
2.
  u
se an adapter such as the 
a
 lpha
® Rubber hose Connector as a joint between 
the duct and the 
f
lexible 
h
ose Connector.
Rubber hose Connector Duct
Stainless Steel  h ose  b and
(fig.10)  

14
alPha® ECOGuaRD tyPE G SChEMatIC   

15
alPha® ECOGuaRD tyPE G PaRt S  l IS t
DRaWING NO. PaRt NO. DESCRIP t IONQ ua N t I ty
1500032 Main Cover 1
2 500033 Sub Cover 1
3 500034
h

alf Cover 1
4 500005 Rubber 
h

ose  a dapter1
5 500006 Stainless Steel 
h ose  b and1
6 500037 Screw M4x10 4
7 500038 Set Plate 1
8 500039
h

older Spring 4
9 500020
f

lat  h ead Screw M4x5 3
10a 500028 Connector 
a ssembly (Makita
® / Milwakee® / bosch®) 1
10b 500003 Connector 
a
ssembly (
h
itachi
®) 1
10c 500004 Connector 
a
ssembly (
b
osch
® / Metabo®) 1...

Copyright © 2016 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
01/2016