Alpha Tool.Com.HK Limited Ecoguard Type W User Manual

Part No: ECOGRDCW Version 2
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
Alpha® Ecoguard Type W
Dust Collection Cover  Instruction Manual
MANUAL
(*Shown with angle grinder / sold separately)  

2
TablE Of CONTENTS
 
Introduction ........................................................................\
......... 3
About the Symbols ..................................................................... 3
Ecoguard Type W Overview ....................................................... 4
Accessories  ........................................................................\
........ 4
Connectors & Flanges  ................................................................ 5
Installation of the Dust...

3
 INTRODuCTION
Thank you for purchasing the  alpha
® Ecoguard “Type W” Dust Collection Cover.  
The Ecoguard Type W must be used with a vacuum, or other dust collection system.  
To ensure correct use, read this Instruction Manual and the Instruction Manual for 
the power tool and follow the operating instructions.  Keep this manual in a place 
where operators can access it easily whenever necessary!
 abOuT  ThE SyMbOlS
According  to  the  hazard  level,  all  safety  notes  in  this  manual  are...

4
 ECOGuaRD TyPE W OVERVIEW
 aCCESSORIES 
  Ecoguard Dust Collection Cover w/ Connector (Part# 500002)  .....1 pc 
 Collar........................  ..................................................................... 2 pcs
  additional Connector  assembly for Most 5” Grinders  ....................3 pcs 
  flange and locknut Set for Selective Grinders  .............................1 set 
  hex Wrench........................  ............................................................ 1 pc
  Rubber  hose...

5
aTT aChablE GRINDERS
GRINDER SIZE MODEl
alPha
®5” hSG-125
MaKIT a 4-1/2”
Ga4530
Ga4534
9564CV
9564PC
9557Nb9557Pb
5” Ga5010Z
Ga5020
Ga5020y 9558Pb
9565CV
9565PC
6” Ga6020
Ga6010Z 9566CV
9566PC
hIT aChI 4-1/2” G12Sa3
G12SE2
G12SE2P9 G12SV a
G12SR3 G12SS
5” G13SC2
G13SC2P9 G13SP
G13V a   

6
GRINDERSIZE MODEl
bOSCh 4-1/2”
1800
1810PS
1810PSD
5” 1801
1803EVS 1811PS 1821
1821D
6” 1806E
1812PSD
MET abO 4-1/2”
  W8-115
W8-115 Quick
W8-115 QuickProtect
5” W8-125 Quick
W11-125 Quick
W a11-125 Quick
WE9-125 Quick WE14-125 Plus WE14-125 VS
WP8-125 QuickProtect
WP11-125 QuickProtect
WEP a14-125 QuickProtect
6” W11-150 Quick
WE14-150 Quick
WEP14-150 QuickProtect
WEP a14-150 QuickProtect
WP11-150 QuickProtect
a TT aChablE GRINDERS (CONT’D)   

7
GRINDERSIZE MODEl
DEW alT 4-1/2”
D28110
D28112
D28402
4-1/2” / 5” D28065
D28114
D28115
D28131
6” D28140
D28144
MIl WauKEE 4/1/2”
6130-33
6140-30
6146-30
6146-31
6146-33
6147-30
6147-31
6121-30
6121-31
5” 6117-30
6117-31
6117-33
6117-33D 6121-31a
6” 6124-30
6124-31
6161-30
6161-31
6161-33
a
TT aChablE GRINDERS   

8
 ECOGuaRD TyPE W SPaCERS aND CONNECTORS
500035
500022
500027
500012
500007
500007 500004
500008
500008
500002
500003
500011
500007
500007
500008
500008
ALPHA
®/MAKITA
®/MILWAUKEE BOSCH
® /DEWALT
METABO
HITACHI   

9
 INSTallaTION Of  ThE DuST  COllECTION COVER
  WaRNING!
1.  be sure to turn off the high-speed angle grinder and remove the plug 
from the electrical outlet before attaching and installing the Dust Col-
lection Cover. 
2.  Make sure the Dust Collection Cover is securely attached; otherwise it 
may come loose which could cause injury.
3.  If you installed the Dust Collection Cover to a high-speed angle grinder\
 
but the connector is loose and can not be securely attached, do not use 
the Dust...

10
 INSTallING  TO OThER hIGh-SPEED aNGlE GRINDERS WITh 
INCluDED OThER CONNECTORS
 If you install the Dust Collection Cover to a high-speed angle grinder but the 
connector is loose and cannot be securely attached, it may be necessary to 
change the connector designed for other makes.
1.  using the hexagon Wrench, remove the three bolts in the connector 
attached to the Dust Collection Cover. (fig. 3)
2.  attach the supplied connector by following the instruction in (1) above\
 
in reverse.  (for...