Alpha Tool.Com.HK Limited Ecoguard Type W User Manual

11
 MOuNTING ThE DIaMOND WhEEl
1.  loosen the Dust Collection Cover Knob (a). (fig. 4)
2.  Slide the Dust Collection Cover open. (fig.5)
(fig.5)
(fig.4)
Knob (a)
lock Pin  

12
3. Mount  the  supplied  spacer  with  the  power  tool  or  dedicated  flange  lock 
nut set on the spindle and then mount the diamond wheel. (fig. 6)
4.  Mount  the  inner  flange  on  the  spindle  on  top  of  the  diamond  wheel  with 
the convex side of the inner flange on the diamond wheel side. 
5.  Press  the  lock  pin  to  fix  the  spindle  and  securely  tighten  the  lock  nut 
with a pin wrench.
6.  Replace the Dust Collection Cover (fig. 4) and tighten the knob (a).
 aDjuSTING  ThE...

13
 aTT aChING ThE DuST COllECTOR
attach the Dust Collection Cover to the hose. (fig. 10)
*The hose opening of the Dust Collection Cover has an outside diameter of 
34mm. 
If necessary, use the Rubber hose  adapter and Stainless hose band supplied with 
the Dust Collection Cover. 
(fig.9)
(fig.10)
 
3.  use D115 scale for 4.5” (115mm) 
diameter blade and D125 scale 
for 5” (125mm) diameter blade.  
Cutting depth is indicated by 
millimeter.
Dust Connector hose
Stainless Steel hose bandRubber  hose...

14
   alPha® ECOGuaRD TyPE W SChEMa TIC   

15
   alPha® ECOGuaRD TyPE W P aRTS lIST
DRaWING NO. PaRT NO. DESCRIPTION QuaNTITy
1 500027 Cover assembly 1
2 500009 base 1
3 500010 base Plate 1
4a 500002 Connector assembly (alpha
®/Makita®/ 
Milwaukee) 1
4b 500003 Connector assembly (hitachi) 1
4c 500004 Connector assembly (Metabo
®) 1
4d 500027 Connector assembly (bosch
®/Dewalt) 1
5 500005 Rubber hose adapter 1
6 500006 Stainless Steel hose band 1
7 500007 Inner flange 1
8 500008 lock Nut 1
9e 500011 Spacer (hitachi/T2.5) 1
9f 500012 Spacer...

Copyright © 20102Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
08/2012